Sony HT-SF1300 / HT-SS1300 / STR-KS1300 Service Manual ▷ View online
STR-KS1300
5
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-2. CASE
(SL07)
(Page
5)
3-3. HDMI
BOARD
(Page
6)
3-5. MAIN
BOARD
(Page
7)
3-4. FRONT PANEL BLOCK
(Page
(Page
6)
SET
Note: Follow the disassembly procedure in the numerical order given.
3-2. CASE (SL07)
two screws
(BVTP3
(BVTP3
× 8)
two tapping screws
Remove the case (SL07)
in the direction of arrow ".
two tapping screws
"
STR-KS1300
6
3-3. HDMI BOARD
two screws
(BVTP3
(BVTP3
× 8)
three screws
(BVTP3
(BVTP3
× 8)
HDMI left bracket
HDMI board
connector
(CN3509)
three screws
(BVTP3
(BVTP3
× 8)
wire (flat type) (17 core)
(HDMI BOARD (CN3511),
MAIN BOARD (CNS506))
3-4. FRONT PANEL BLOCK
screw
(BVTP3
(BVTP3
× 8)
wire (flat type) (21 core)
(CNS500)
(CNS500)
connector
(CNP500)
(CNP500)
saranet
cushion
three screws
(BVTP3
(BVTP3
× 8)
two claws
claw
three claws
front panel block
claw
STR-KS1300
7
3-5. MAIN BOARD
seven screws
(BVTP3
(BVTP3
× 8)
R four screws
(BVTP3
(BVTP3
× 8)
wire (flat type) (11 core)
(CNS508)
(CNS508)
wire (flat type) (5 core)
(CNS505)
(CNS505)
wire (flat type) (21 core)
(CNS500)
(CNS500)
connector
(CNP500)
(CNP500)
three connectors
(CN902, CN905, CN906)
screw (BVTP3 × 14)
screw (BVTP3 × 10)
screw (BVTP3 × 10)
heat sink (AMP)
RB MAIN board
two radiation
sheets
sheets
(AMP)
STR-KS1300
8
SECTION 4
TEST MODE
S.F. CLEAR MODE
The preset sound fi led is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [SOUND FIELD +] button, press the [
The preset sound fi led is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [SOUND FIELD +] button, press the [
?/1
]
button to turn on the main power.
2. The message “S.F. CLR.” appears and initialization is per-
formed.
FACTORY PRESET MODE
All preset contents are reset to the default setting.
Procedure:
1. While pressing the [SOUND FIELD +] and [PRESET TUNING
All preset contents are reset to the default setting.
Procedure:
1. While pressing the [SOUND FIELD +] and [PRESET TUNING
–] buttons, press the [
?/1
] button to turn on the main power.
2. The message “FACTORY” appears and the present contents
are reset to the default values.
VERSION MODE
When this mode is used the model, the destination and the software
version number are displayed.
Procedure:
1. While pressing the [INPUT SELECTOR] and [PRESET TUNING
When this mode is used the model, the destination and the software
version number are displayed.
Procedure:
1. While pressing the [INPUT SELECTOR] and [PRESET TUNING
+] buttons, press the [
?/1
] button to turn on the main power.
2. The model, the distination and the software version number
appear.
FL CHECK MODE
All fl uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. When pressing the [PRESET TUNING +] and [PRESET
All fl uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. When pressing the [PRESET TUNING +] and [PRESET
TUNING –] buttons, press the [
?/1
] button to turn on the main
power.
2. All segments and [VIDEO 1], [SAT], [BD] LEDs turn on.
3. Press the [INPUT SELECTOR] button.
4. Half of segments and [DMPORT], [VIDEO 2], [SA-CD/CD]
3. Press the [INPUT SELECTOR] button.
4. Half of segments and [DMPORT], [VIDEO 2], [SA-CD/CD]
LEDs turn on.
5. Press the [INPUT SELECTOR] button once again.
6. Others half of segments and [DVD], [TV], [TUNER] LEDs
6. Others half of segments and [DVD], [TV], [TUNER] LEDs
turn on.
7. Press the [INPUT SELECTOR] button once again.
8. Segments of “EQ” turn on.
8. Segments of “EQ” turn on.
KEY CHECK MODE
This mode is used to check the key.
Procedure:
1. While pressing the [MUTING] and [PRESET TUNING –]
This mode is used to check the key.
Procedure:
1. While pressing the [MUTING] and [PRESET TUNING –]
buttons, press the [
?/1
] button to turn on the main power.
2. The message “REST 06” appears.
3. Every pressing of any button other than the [
3. Every pressing of any button other than the [
?/1
] button counts
down the buttons. The buttons which are already counted once
are not counted again.
are not counted again.
4. When all buttons are pressed, the message “REST 00” ap-
pears.
SWAP AUTO MODE
(Not used for the servicing)
(Not used for the servicing)
SHIPMENT MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [PRESET TUNING –] and [SOUND FIELD
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [PRESET TUNING –] and [SOUND FIELD
–] buttons, press the [
?/1
] button to turn on the main power.
2. The message “CLEARING” appears, then the message
“CLEARED” appears.
PROTECTOR EVER MODE
When this mode is used, a protector on state is maintainable.
Procedure:
1. While pressing the [SOUND FIELD +] and [INPUT SELECTOR]
When this mode is used, a protector on state is maintainable.
Procedure:
1. While pressing the [SOUND FIELD +] and [INPUT SELECTOR]
buttons, press the [
?/1
] button to turn on the main power.
2. The message “PROTEVER” appears.
VACS OFF MODE
This mode is used to switch off the VACS (Variable Attenuation
Control System).
Procedure:
1. Press the buttons of standard commander (RM-AAU023) (PART
This mode is used to switch off the VACS (Variable Attenuation
Control System).
Procedure:
1. Press the buttons of standard commander (RM-AAU023) (PART
No.: 1-480-587-11) in order of [DISPLAY]
→ [DISPLAY] →
[DISPLAY]
→ [MASTER VOL +] → [3].
2. The message “VACS OFF” appears and the switch off the
VACS.
DCAC TEST MODE
(Not used for the servicing)
RE-BOX CLASSIFICATION TEST MODE
Procedure:
1. While pressing the [PRESET TUNING +] and [SOUND
Procedure:
1. While pressing the [PRESET TUNING +] and [SOUND
FIELD +] buttons, press the [
?/1
] button to turn on the main
power.
2. The message “R.BOX[][][]XX” appears.
XX: times set powered on
HDMI CONTROL ON/OFF MODE
Procedure:
1. Press the [
Procedure:
1. Press the [
?/1
] button to turn on the main power.
2. Press the buttons of standard commander (RM-AAU023)
(PART No.: 1-480-587-11) in order of [AMP MENU] → [↓]
→ [↓] → [↓] → [↓] → [↓] → [→] → [↓] → [→] → [↓].
→ [↓] → [↓] → [↓] → [↓] → [→] → [↓] → [→] → [↓].
3. The message “CTRL ON” appears, [ACTIVE STANDBY]
LED turn on when the receiver is a standby mode.
4. Press the buttons [↑] of standard commander.
5. The message “CTRL OFF” appears, [ACTIVE STANDBY]
5. The message “CTRL OFF” appears, [ACTIVE STANDBY]
LED turn off when the receiver is a standby mode.
Click on the first or last page to see other HT-SF1300 / HT-SS1300 / STR-KS1300 service manuals if exist.