Sony HT-SF1200 / HT-SF2000 / HT-SS1200 / HT-SS2000 / SS-CNP1200 / SS-CNP2200 / SS-MSP1200 / SS-MSP2200 / SS-SRP1200 / SS-SRP2200 / SS-WP1200 / SS-WP2200 Service Manual ▷ View online
SERVICE MANUAL
Published by Sony Techno Create Corporation
Sony Corporation
SS-CNP1200/CNP2200/MSP1200/MSP2200/
SRP1200/SRP2200/WP1200/WP2200
SPECIFICATIONS
SPEAKER SYSTEM
9-887-763-01
2007G05-1
©
2007.07
US Model
AEP Model
UK Model
SS-CNP1200/CNP2200/MSP1200/MSP2200/
SRP1200/SRP2200/WP1200/WP2200
Canadian Model
SS-CNP2200/MSP2200/SRP2200/WP2200
Ver. 1.0 2007.07
Home Audio Division
Photo :
SS-CNP1200
Photo :
SS-MSP1200
Photo :
SS-SRP1200
Photo :
SS-WP1200
Photo :
SS-CNP2200
Photo :
SS-MSP2200
Photo :
SS-SRP2200
Photo :
SS-WP2200
• SS-CNP1200 is the center speaker in HT-SS1200/SS2000.
• SS-CNP2200 is the center speaker in HT-SF1200/SF2000.
• SS-MSP1200 is the front speaker in HT-SS1200/SS2000.
• SS-MSP2200 is the front speaker in HT-SF1200/SF2000.
• SS-SRP1200 is the surround speaker in HT-SS1200/SS2000.
• SS-SRP2200 is the surround speaker in HT-SF1200/SF2000.
• SS-WP1200 is the sub woofer in HT-SS1200/SS2000.
• SS-WP2200 is the sub woofer in HT-SF1200/SF2000.
66
GB
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
speakers and sub woofer. Depending on the sound
field settings and the source, there may be no
sound output.
speakers and sub woofer. Depending on the sound
field settings and the source, there may be no
sound output.
Inputs
Analog
Sensitivity: 1 V/50 kohms
Digital (Coaxial) Impedance: 75 ohms
Tone
Gain levels
±10 dB, 0.5 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code U, UC
Models of area code U, UC
With 10-kHz tuning scale:
530 – 1,710 kHz
3)
With 9-kHz tuning scale:
531 – 1,710 kHz
3)
Models of area code CEL, CEK
With 9-kHz tuning scale:
531 – 1,602 kHz
Antenna
Loop antenna
Intermediate frequency
450 kHz
3)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down PRESET
TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down PRESET
TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT:
5 V, 700 mA
Power consumption
Power consumption (during standby mode)
0.3 W (When
“CONTROL” in VIDEO
“CONTROL” in VIDEO
menu is set to “CTRL
OFF”)
OFF”)
Dimensions (w/h/d) (Approx.)
430 × 66.5 × 333 mm
(17 × 2 5/8 × 13 1/4 inches)
including projecting parts
(17 × 2 5/8 × 13 1/4 inches)
including projecting parts
and controls
Mass (Approx.)
3.6 kg (7 lb 15 oz)
Speaker section
HT-SF2000 only
• Front speakers (SS-MSP2200)
• Center speaker (SS-CNP2200)
• Surround speakers (SS-SRP2200)
Front speakers
• Center speaker (SS-CNP2200)
• Surround speakers (SS-SRP2200)
Front speakers
2 way, magnetically
shielded
shielded
Center speaker
Full range, magnetically
shielded
shielded
Surround speakers
Full range
Speaker units
Front speakers
Front speakers
65 mm (2 5/8 inches)
cone type,
cone type,
25 mm (1 inch) Balance
Dome Tweeter
Dome Tweeter
Center speaker
65 mm (2 5/8 inches)
cone type
Surround speakers
65 mm (2 5/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
3 ohms
Area code
Power requirements
U, UC
120 V AC, 60 Hz
CEL, CEK
230 V AC, 50 Hz
Area code
Power requirements
U, UC
120 V AC, 60 Hz
CEL, CEK
230 V AC, 50/60 Hz
Area code
Power consumption
U, CEL, CEK
165 W
UC
165 W (for USA)
245 VA (for CANADA)
67
GB
A
d
d
itio
n
al
In
fo
rm
at
io
n
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
92 × 538 × 74 mm
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
300 mm (11 7/8 ×
48 1/2 (max.) ×
11 7/8 inches) with stand
48 1/2 (max.) ×
11 7/8 inches) with stand
Center speaker
260 × 91 × 80 mm
(10 1/4 × 3 5/8 × 3 1/4
inches)
(10 1/4 × 3 5/8 × 3 1/4
inches)
Mass (Approx.)
Front/surround speakers
Front/surround speakers
1.0 kg (2 lb 4 oz)
2.8 kg (6 lb 3 oz) with
2.8 kg (6 lb 3 oz) with
stand
Center speaker
0.6 kg (1 lb 6 oz)
• Sub woofer (SS-WP2200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
196 × 320 × 400 mm
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
panel
Mass (Approx.)
5.6 kg (12 lb 6 oz)
HT-SS2000 only
• Front speakers (SS-MSP1200)
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
Full range, magnetically
shielded
Surround speakers
Full range
Speaker units
57 mm (2 1/4 inches)
cone type
Enclosure type
Bass reflex
Rated Impedance
3 ohms
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
80 × 150 × 88 mm
(3 1/4 × 6 × 3 1/2 inches)
Center speaker
250 × 85 × 88 mm
(9 7/8 × 3 3/8 × 3 1/2
(9 7/8 × 3 3/8 × 3 1/2
inches)
Mass (Approx.)
Front speakers
Front speakers
0.5 kg (1 lb 2 oz)
Center speaker
0.7 kg (1 lb 9 oz)
Surround speakers
0.4 kg (15 oz)
• Sub woofer (SS-WP1200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
200 × 382 × 337 mm
(7 7/8 × 15 1/8 × 13 3/8
inches) including front
panel
inches) including front
panel
Mass (Approx.)
4.5 kg (9 lb 15 oz)
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
– HT-SS2000 only (20)
– HT-SF2000 only (4)
– HT-SF2000 only (4)
• Sub woofer (4)
Design and specifications are subject to
change without notice.
change without notice.
For details on the area code of the
component you are using, see page 3.
component you are using, see page 3.
67
GB
A
d
d
itio
n
al
In
fo
rm
at
io
n
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
92 × 538 × 74 mm
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
300 mm (11 7/8 ×
48 1/2 (max.) ×
11 7/8 inches) with stand
48 1/2 (max.) ×
11 7/8 inches) with stand
Center speaker
260 × 91 × 80 mm
(10 1/4 × 3 5/8 × 3 1/4
inches)
(10 1/4 × 3 5/8 × 3 1/4
inches)
Mass (Approx.)
Front/surround speakers
Front/surround speakers
1.0 kg (2 lb 4 oz)
2.8 kg (6 lb 3 oz) with
2.8 kg (6 lb 3 oz) with
stand
Center speaker
0.6 kg (1 lb 6 oz)
• Sub woofer (SS-WP2200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
196 × 320 × 400 mm
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
panel
Mass (Approx.)
5.6 kg (12 lb 6 oz)
HT-SS2000 only
• Front speakers (SS-MSP1200)
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
Full range, magnetically
shielded
Surround speakers
Full range
Speaker units
57 mm (2 1/4 inches)
cone type
Enclosure type
Bass reflex
Rated Impedance
3 ohms
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
80 × 150 × 88 mm
(3 1/4 × 6 × 3 1/2 inches)
Center speaker
250 × 85 × 88 mm
(9 7/8 × 3 3/8 × 3 1/2
(9 7/8 × 3 3/8 × 3 1/2
inches)
Mass (Approx.)
Front speakers
Front speakers
0.5 kg (1 lb 2 oz)
Center speaker
0.7 kg (1 lb 9 oz)
Surround speakers
0.4 kg (15 oz)
• Sub woofer (SS-WP1200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
200 × 382 × 337 mm
(7 7/8 × 15 1/8 × 13 3/8
inches) including front
panel
inches) including front
panel
Mass (Approx.)
4.5 kg (9 lb 15 oz)
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
– HT-SS2000 only (20)
– HT-SF2000 only (4)
– HT-SF2000 only (4)
• Sub woofer (4)
Design and specifications are subject to
change without notice.
change without notice.
For details on the area code of the
component you are using, see page 3.
component you are using, see page 3.
67
GB
A
d
d
itio
n
al
In
fo
rm
at
io
n
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
92 × 538 × 74 mm
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
300 mm (11 7/8 ×
48 1/2 (max.) ×
11 7/8 inches) with stand
48 1/2 (max.) ×
11 7/8 inches) with stand
Center speaker
260 × 91 × 80 mm
(10 1/4 × 3 5/8 × 3 1/4
inches)
(10 1/4 × 3 5/8 × 3 1/4
inches)
Mass (Approx.)
Front/surround speakers
Front/surround speakers
1.0 kg (2 lb 4 oz)
2.8 kg (6 lb 3 oz) with
2.8 kg (6 lb 3 oz) with
stand
Center speaker
0.6 kg (1 lb 6 oz)
• Sub woofer (SS-WP2200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
196 × 320 × 400 mm
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
panel
Mass (Approx.)
5.6 kg (12 lb 6 oz)
HT-SS2000 only
• Front speakers (SS-MSP1200)
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
Full range, magnetically
shielded
Surround speakers
Full range
Speaker units
57 mm (2 1/4 inches)
cone type
Enclosure type
Bass reflex
Rated Impedance
3 ohms
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
80 × 150 × 88 mm
(3 1/4 × 6 × 3 1/2 inches)
Center speaker
250 × 85 × 88 mm
(9 7/8 × 3 3/8 × 3 1/2
(9 7/8 × 3 3/8 × 3 1/2
inches)
Mass (Approx.)
Front speakers
Front speakers
0.5 kg (1 lb 2 oz)
Center speaker
0.7 kg (1 lb 9 oz)
Surround speakers
0.4 kg (15 oz)
• Sub woofer (SS-WP1200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
200 × 382 × 337 mm
(7 7/8 × 15 1/8 × 13 3/8
inches) including front
panel
inches) including front
panel
Mass (Approx.)
4.5 kg (9 lb 15 oz)
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
– HT-SS2000 only (20)
– HT-SF2000 only (4)
– HT-SF2000 only (4)
• Sub woofer (4)
Design and specifications are subject to
change without notice.
change without notice.
For details on the area code of the
component you are using, see page 3.
component you are using, see page 3.
67
GB
A
d
d
itio
n
al
In
fo
rm
at
io
n
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
92 × 538 × 74 mm
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
300 mm (11 7/8 ×
48 1/2 (max.) ×
11 7/8 inches) with stand
48 1/2 (max.) ×
11 7/8 inches) with stand
Center speaker
260 × 91 × 80 mm
(10 1/4 × 3 5/8 × 3 1/4
inches)
(10 1/4 × 3 5/8 × 3 1/4
inches)
Mass (Approx.)
Front/surround speakers
Front/surround speakers
1.0 kg (2 lb 4 oz)
2.8 kg (6 lb 3 oz) with
2.8 kg (6 lb 3 oz) with
stand
Center speaker
0.6 kg (1 lb 6 oz)
• Sub woofer (SS-WP2200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
196 × 320 × 400 mm
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
panel
Mass (Approx.)
5.6 kg (12 lb 6 oz)
HT-SS2000 only
• Front speakers (SS-MSP1200)
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
Full range, magnetically
shielded
Surround speakers
Full range
Speaker units
57 mm (2 1/4 inches)
cone type
Enclosure type
Bass reflex
Rated Impedance
3 ohms
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
80 × 150 × 88 mm
(3 1/4 × 6 × 3 1/2 inches)
Center speaker
250 × 85 × 88 mm
(9 7/8 × 3 3/8 × 3 1/2
(9 7/8 × 3 3/8 × 3 1/2
inches)
Mass (Approx.)
Front speakers
Front speakers
0.5 kg (1 lb 2 oz)
Center speaker
0.7 kg (1 lb 9 oz)
Surround speakers
0.4 kg (15 oz)
• Sub woofer (SS-WP1200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
200 × 382 × 337 mm
(7 7/8 × 15 1/8 × 13 3/8
inches) including front
panel
inches) including front
panel
Mass (Approx.)
4.5 kg (9 lb 15 oz)
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
– HT-SS2000 only (20)
– HT-SF2000 only (4)
– HT-SF2000 only (4)
• Sub woofer (4)
Design and specifications are subject to
change without notice.
change without notice.
For details on the area code of the
component you are using, see page 3.
component you are using, see page 3.
• JIG
When disassembling the set, use the following jig (for speaker
removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
67
GB
A
d
d
itio
n
al
In
fo
rm
at
io
n
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
92 × 538 × 74 mm
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
300 mm (11 7/8 ×
48 1/2 (max.) ×
11 7/8 inches) with stand
48 1/2 (max.) ×
11 7/8 inches) with stand
Center speaker
260 × 91 × 80 mm
(10 1/4 × 3 5/8 × 3 1/4
inches)
(10 1/4 × 3 5/8 × 3 1/4
inches)
Mass (Approx.)
Front/surround speakers
Front/surround speakers
1.0 kg (2 lb 4 oz)
2.8 kg (6 lb 3 oz) with
2.8 kg (6 lb 3 oz) with
stand
Center speaker
0.6 kg (1 lb 6 oz)
• Sub woofer (SS-WP2200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
196 × 320 × 400 mm
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
panel
Mass (Approx.)
5.6 kg (12 lb 6 oz)
HT-SS2000 only
• Front speakers (SS-MSP1200)
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
Full range, magnetically
shielded
Surround speakers
Full range
Speaker units
57 mm (2 1/4 inches)
cone type
Enclosure type
Bass reflex
Rated Impedance
3 ohms
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
80 × 150 × 88 mm
(3 1/4 × 6 × 3 1/2 inches)
Center speaker
250 × 85 × 88 mm
(9 7/8 × 3 3/8 × 3 1/2
(9 7/8 × 3 3/8 × 3 1/2
inches)
Mass (Approx.)
Front speakers
Front speakers
0.5 kg (1 lb 2 oz)
Center speaker
0.7 kg (1 lb 9 oz)
Surround speakers
0.4 kg (15 oz)
• Sub woofer (SS-WP1200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
200 × 382 × 337 mm
(7 7/8 × 15 1/8 × 13 3/8
inches) including front
panel
inches) including front
panel
Mass (Approx.)
4.5 kg (9 lb 15 oz)
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
– HT-SS2000 only (20)
– HT-SF2000 only (4)
– HT-SF2000 only (4)
• Sub woofer (4)
Design and specifications are subject to
change without notice.
change without notice.
For details on the area code of the
component you are using, see page 3.
component you are using, see page 3.
67
GB
A
d
d
itio
n
al
In
fo
rm
at
io
n
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
92 × 538 × 74 mm
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
(3 5/8 × 21 1/4 × 3 inches)
300 × 1,229 (max.) ×
300 mm (11 7/8 ×
48 1/2 (max.) ×
11 7/8 inches) with stand
48 1/2 (max.) ×
11 7/8 inches) with stand
Center speaker
260 × 91 × 80 mm
(10 1/4 × 3 5/8 × 3 1/4
inches)
(10 1/4 × 3 5/8 × 3 1/4
inches)
Mass (Approx.)
Front/surround speakers
Front/surround speakers
1.0 kg (2 lb 4 oz)
2.8 kg (6 lb 3 oz) with
2.8 kg (6 lb 3 oz) with
stand
Center speaker
0.6 kg (1 lb 6 oz)
• Sub woofer (SS-WP2200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
196 × 320 × 400 mm
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
(7 3/4 × 12 5/8 × 15 3/4
inches) including front
panel
Mass (Approx.)
5.6 kg (12 lb 6 oz)
HT-SS2000 only
• Front speakers (SS-MSP1200)
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
• Center speaker (SS-CNP1200)
• Surround speakers (SS-SRP1200)
Front/center speakers
Full range, magnetically
shielded
Surround speakers
Full range
Speaker units
57 mm (2 1/4 inches)
cone type
Enclosure type
Bass reflex
Rated Impedance
3 ohms
Dimension (w/h/d) (Approx.)
Front/surround speakers
Front/surround speakers
80 × 150 × 88 mm
(3 1/4 × 6 × 3 1/2 inches)
Center speaker
250 × 85 × 88 mm
(9 7/8 × 3 3/8 × 3 1/2
(9 7/8 × 3 3/8 × 3 1/2
inches)
Mass (Approx.)
Front speakers
Front speakers
0.5 kg (1 lb 2 oz)
Center speaker
0.7 kg (1 lb 9 oz)
Surround speakers
0.4 kg (15 oz)
• Sub woofer (SS-WP1200)
Speaker system
Speaker system
Magnetically shielded
Speaker unit
160 mm (6 3/8 inches)
cone type
cone type
Enclosure type
Bass reflex
Rated Impedance
1.5 ohms
Dimensions (w/h/d) (Approx.)
200 × 382 × 337 mm
(7 7/8 × 15 1/8 × 13 3/8
inches) including front
panel
inches) including front
panel
Mass (Approx.)
4.5 kg (9 lb 15 oz)
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
AM loop antenna (1)
Remote commander RM-AAU017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Speaker cords (5)
Coaxial digital cord (1)
Foot pads
• Speakers
– HT-SS2000 only (20)
– HT-SF2000 only (4)
– HT-SF2000 only (4)
• Sub woofer (4)
Design and specifications are subject to
change without notice.
change without notice.
For details on the area code of the
component you are using, see page 3.
component you are using, see page 3.
SS-CNP1200/CNP2200/MSP1200/MSP2200/SRP1200/SRP2200/WP1200/WP2200
2
SECTION 1
DISASSEMBLY
• This set can be disassembled in the order shown below.
1-1. FRONT PANEL (SS-WP1200)
1-2. FRONT PANEL (SS-WP2200)
Note 1: Remove the front panel assy by paying attention particulaly
to the periphyery of eight bosses
where the front panel assy bonded tightly.
Note 2: Take care not to damage the set
by applying an excessive force.
boss
Insert the jig (J-2501-238-A) into a space
made by inserting the screwdriver,
and raise the front panel assy gradually.
front panel assy
boss
Note 1: Remove the front panel assy by paying attention particularly
to the periphery of six bosses
where the front panel assy bonded tightly.
Note 2: Take care not to damage the set
by applying an excessive force.
Insert the jig (J-2501-238-A) into a space
made by inserting the screwdriver,
and raise the front panel assy gradually.
front panel assy
boss
boss
SS-CNP1200/CNP2200/MSP1200/MSP2200/SRP1200/SRP2200/WP1200/WP2200
SECTION 2
EXPLODED VIEWS
1
A-1309-366-A OVERALL ASSY (CENTER) (SS-CNP1200: US)
1
A-1336-660-A OVERALL ASSY (CENTER)
(SS-CNP1200: AEP, UK)
2
A-1239-675-A OVERALL ASSY (CENTER) (SS-CNP2200)
3
A-1222-759-A OVERALL ASSY (FRONT) (SS-MSP1200)
4
A-1363-188-A OVERALL ASSY (FRONT) (SS-MSP2200)
5
A-1222-777-A OVERALL ASSY (SURROUND) (SS-SRP1200)
6
A-1363-189-A OVERALL ASSY (SURROUND) (SS-SRP2200)
7
3-096-346-01 STAND PIPE (for SS-MSP2200/SRP2200)
8
3-087-053-01 +BVTP2.6 (3CR) (for SS-MSP2200/SRP2200)
9
A-1252-189-A STAND BASE (M) ASSY
(for SS-MSP2200/SRP2200)
10
3-211-019-01 SCREW (WASHER) (BLACK)
(for SS-MSP2200/SRP2200)
11
7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 (SILVER)
(for SS-MSP2200/SRP2200)
*************************************************************
ACCESSORY
**********
9-833-602-12 WIRE KIT (5 pieces) (Speaker cords)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
R
R
Parts of Color Cabinet’s Color
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice.
Some delay should be anticipated when
ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
2-1. CENTER/FRONT/SURROUND SPEAKER/SPEAKER STAND
11
8
7
3
1
2
5
6
10
10
4
9
SS-CNP1200/CNP2200/MSP1200/MSP2200/SRP1200/SRP2200/WP1200/WP2200
51
A-1223-246-A GRILLE FRAME ASSY (SS-WP1200)
52
2-897-270-01 FRONT PANEL (SS-WP1200)
53
4-874-614-71 SCREW (SS-WP1200)
54
1-826-667-11 LOUDSPEAKER (16cm)
56
A-1242-128-A GRILLE FRAME ASSY (SS-WP2200)
57
2-893-658-01 FRONT PANEL (S) (SS-WP2200)
58
4-874-614-12 SCREW (1) (3.5X14), TAPPING (SS-WP2200)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
2-2. SUB WOOFER
54
– SS-WP1200 –
– SS-WP2200 –
not supplied
not supplied
57
54
56
58
53
not supplied
not supplied
52
51
not supplied
not supplied
Display
