Sony HT-FS1 / SA-FS1 / SS-FS1 Service Manual ▷ View online
SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
SA-FS1/SS-FS1
SA-FS1
ACTIVE SUBWOOFER
SS-FS1
SPEAKER
9-889-231-01
2008H04-1
©
2008.08
AEP Model
UK Model
Ver. 1.0 2008.08
SPECIFICATIONS
Formats supported by this system
Digital input formats supported by this system
are as follows.
Digital input formats supported by this system
are as follows.
Format
Supported/Not supported
Dolby Digital
a
DTS
a
Linear PCM (2ch)*
a
Linear PCM
(5.1ch, 7.1ch)*
(Only on HDMI)
(5.1ch, 7.1ch)*
(Only on HDMI)
a
Dolby Digital Plus
×
Dolby True HD
×
DTS-HD
×
* Linear PCM accepts sampling frequencies of
no more than 48 kHz.
no more than 48 kHz.
Amplifi er section (SA-FS1)
Power output (rated)
Front L/Front R:
Power output (rated)
Front L/Front R:
40 W + 40 W
(at 8 ohms, 1 kHz, 1 %
THD)
RMS output power (reference)
Front L/Front R:
RMS output power (reference)
Front L/Front R:
50 W + 50 W
(at 8 ohms, 1 kHz, 10 %
THD)
Subwoofer:
Subwoofer:
100 W (at 4 ohms, 100 Hz,
10
%
THD)
Inputs (Analog)
TV
TV
Impedance: 30 kohms
Inputs (Digital)
TV, DVD
TV, DVD
Optical
SAT Coaxial,
optical
• SA-FS1 is the amplifi er and HDMI section in
HT-FS1.
• SS-FS1 is the speaker in HT-FS1.
HT-FS1.
• SS-FS1 is the speaker in HT-FS1.
HDMI section (SA-FS1)
Connector HDMI
Connector HDMI
19pin-standard
connector
Video inputs/outputs BD, DVD, SAT:
Video inputs/outputs BD, DVD, SAT:
640 × 480p@60 Hz
720 × [email protected]/60 Hz
1440 × [email protected]/60 Hz
(pixel sent 2 times)
1280 × [email protected]/60 Hz
1920 × [email protected]/60 Hz
1920 × [email protected]/60 Hz
720 × 576p@50 Hz
1440 × 576p@50 Hz
(pixel sent 2 times)
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
Audio inputs
BD, DVD, SAT: Linear
PCM
7.1ch/
Dolby
Digital/DTS
Photo: SA-FS1
Photo: SS-FS1
This system incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &
pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc.
All Rights Reserved.
All Rights Reserved.
This system incorporates High-Definition Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
“BRAVIA” is a trademark of Sony Corporation.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
“BRAVIA” is a trademark of Sony Corporation.
– Continued on next page –
SA-FS1/SS-FS1
2
SAFETY-RELATED COMPONET WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
Speakers (SS-FS1)
Speaker system
Speaker system
2-Way speaker system, Bass refl ex, Magnetically
Shielded
Speaker unit
Speaker unit
Woofer: 65 mm cone type
Tweeter: 40 mm cone type
Rated impedance
8 ohms
Dimensions (approx.) 95 mm × 185 mm × 80 mm (w/h/d)
95 mm × 215 mm × 105 mm (w/h/d) with stand
Mass (approx.)
0.85 kg
0.9 kg with stand
Active subwoofer (SA-FS1)
Speaker system
Speaker system
Subwoofer system, Bass refl ex
Speaker unit
160 mm cone type
Dimensions (approx.) 160 mm × 500 mm × 360 mm (w/h/d)
Mass (approx.)
Mass (approx.)
10 kg
Power requirements
220 – 240 V AC, 50/60 Hz
Power consumption
On:
On:
55
W
Active Standby (Control for HDMI is on):
Signal in: 5 W (maximum)
No signal: 1.5 W (minimum)
Standby (Control for HDMI is off): 0.3 W
Power output
(DIGITAL MEDIA PORT)DC OUT: 5 V, 700 mA
(DIGITAL MEDIA PORT)DC OUT: 5 V, 700 mA
Design and specifi cations are subject to change without notice.
SA-FS1/SS-FS1
3
1. SERVICING
NOTES ........................................... 4
2. GENERAL ............................................................ 6
3. DISASSEMBLY
3-1. Front Panel
3-1. Front Panel
Assy
.................................................... 8
3-2. Grille
Assy
............................................................. 9
3-3. AMP Block
............................................................ 10
3-4. IO Board
................................................................ 10
3-5. HDMI Board
.......................................................... 11
3-6. Back Panel, D.C. FAN (M3001) ............................ 11
3-7. MAIN Board
3-7. MAIN Board
.......................................................... 12
3-8. POWER Board
....................................................... 12
4. TEST
MODE ........................................................ 13
5. DIAGRAMS
5-1. Block Diagram - MAIN Section - .......................... 14
5-2. Block Diagram - HDMI Section - .......................... 15
5-3. Block Diagram - AMP Section - ............................ 16
5-4. Block Diagram - POWER SUPPLY Section - ....... 17
5-5. Schematic Diagram - MAIN Board (1/7) - ............ 19
5-6. Schematic Diagram - MAIN Board (2/7) - ............ 20
5-7. Schematic Diagram - MAIN Board (3/7) - ............ 21
5-8. Schematic Diagram - MAIN Board (4/7) - ............ 22
5-9. Schematic Diagram - MAIN Board (5/7) - ............ 23
5-10. Schematic Diagram - MAIN Board (6/7) - ............ 24
5-11. Schematic Diagram - MAIN Board (7/7) - ............ 25
5-12. Printed Wiring Board - MAIN Board (1/2) - ......... 26
5-13. Printed Wiring Board - MAIN Board (2/2) - ......... 27
5-14. Printed Wiring Board - IO Board - ........................ 28
5-15. Schematic Diagram - IO Board - ........................... 29
5-16. Printed Wiring Board - HDMI Board (1/2) - ......... 30
5-17. Printed Wiring Board - HDMI Board (2/2) - ......... 31
5-18. Schematic Diagram - HDMI Board (1/2) - ............ 32
5-19. Schematic Diagram - HDMI Board (2/2) - ............ 33
5-20. Printed Wiring Board - SPOUT Board - ................ 34
5-21. Schematic Diagram - SPOUT Board - ................... 34
5-22. Printed Wiring Board - DISPLAY Board - ............ 35
5-23. Schematic Diagram - DISPLAY Board - ............... 36
5-24. Printed Wiring Boards - PANEL Section - ............ 37
5-25. Schematic Diagram - PANEL Section - ................. 37
5-26. Printed Wiring Board - POWER Board - ............... 38
5-27. Schematic Diagram - POWER Board - ................. 39
5-1. Block Diagram - MAIN Section - .......................... 14
5-2. Block Diagram - HDMI Section - .......................... 15
5-3. Block Diagram - AMP Section - ............................ 16
5-4. Block Diagram - POWER SUPPLY Section - ....... 17
5-5. Schematic Diagram - MAIN Board (1/7) - ............ 19
5-6. Schematic Diagram - MAIN Board (2/7) - ............ 20
5-7. Schematic Diagram - MAIN Board (3/7) - ............ 21
5-8. Schematic Diagram - MAIN Board (4/7) - ............ 22
5-9. Schematic Diagram - MAIN Board (5/7) - ............ 23
5-10. Schematic Diagram - MAIN Board (6/7) - ............ 24
5-11. Schematic Diagram - MAIN Board (7/7) - ............ 25
5-12. Printed Wiring Board - MAIN Board (1/2) - ......... 26
5-13. Printed Wiring Board - MAIN Board (2/2) - ......... 27
5-14. Printed Wiring Board - IO Board - ........................ 28
5-15. Schematic Diagram - IO Board - ........................... 29
5-16. Printed Wiring Board - HDMI Board (1/2) - ......... 30
5-17. Printed Wiring Board - HDMI Board (2/2) - ......... 31
5-18. Schematic Diagram - HDMI Board (1/2) - ............ 32
5-19. Schematic Diagram - HDMI Board (2/2) - ............ 33
5-20. Printed Wiring Board - SPOUT Board - ................ 34
5-21. Schematic Diagram - SPOUT Board - ................... 34
5-22. Printed Wiring Board - DISPLAY Board - ............ 35
5-23. Schematic Diagram - DISPLAY Board - ............... 36
5-24. Printed Wiring Boards - PANEL Section - ............ 37
5-25. Schematic Diagram - PANEL Section - ................. 37
5-26. Printed Wiring Board - POWER Board - ............... 38
5-27. Schematic Diagram - POWER Board - ................. 39
6.
EXPLODED VIEWS
6-1. Cabinet Section (SA-FS1) ..................................... 58
6-2. Front Panel Section (SA-FS1) ............................... 59
6-3. AMP Section (SA-FS1) ......................................... 60
6-4. Main Section (SA-FS1) ......................................... 61
6-5. SS-FS1
6-2. Front Panel Section (SA-FS1) ............................... 59
6-3. AMP Section (SA-FS1) ......................................... 60
6-4. Main Section (SA-FS1) ......................................... 61
6-5. SS-FS1
................................................................... 62
7.
ELECTRICAL PARTS LIST ............................ 63
TABLE OF CONTENTS
SA-FS1/SS-FS1
4
SECTION 1
SERVICE NOTES
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong
viscosity
Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
• JIG
When disassembling the set, use the following jig (for speaker
When disassembling the set, use the following jig (for speaker
removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
NOTE THE IC3511 AND IC3513 ON THE HDMI BOARD
REPLACEMENT
When IC3511 and IC3513 cannot exchange with single. When
IC3511 and IC3513 are damaged, exchange the entire mounted
board.
REPLACEMENT
When IC3511 and IC3513 cannot exchange with single. When
IC3511 and IC3513 are damaged, exchange the entire mounted
board.