Sony HT-DDW995 / STR-K995 Service Manual ▷ View online
8
STR-K995
Name
Function
A
AV
?
/
1
(on/standby)
Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (Z) and then press AV
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (Z) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (3).
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (3).
B ?
/
1
(on/standby)
Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C
Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components as follows.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote” on
page 66.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components as follows.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote” on
page 66.
Button
Assigned Sony
component
component
VIDEO 1
VCR (VTR mode 3)
VIDEO 2
VCR (VTR mode 2)
VIDEO 3
VCR (VTR mode 1)
DVD
DVD player
SAT
Satellite tuner
TV
TV
SA-CD/CD Super Audio CD/
CD player
TUNER
Built-in tuner
AUX
Not assigned
DMPORT
DIGITAL MEDIA
PORT adapter
PORT adapter
Name
Function
D
RECEIVER
Press to activate the receiver
operation (page 39).
operation (page 39).
E
2CH
Press to select a sound field
(page 49, 51, 53).
(page 49, 51, 53).
A.F.D.
MOVIE
MUSIC
F
D. TUNING
Press to enter direct tuning
mode.
mode.
G
AUTO CAL
Press to activate the Auto
Calibration function.
Calibration function.
H
Numeric
buttons
buttons
(number 5
a)
)
Press to
– preset/tune to preset stations.
– select track numbers of the
– preset/tune to preset stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape deck.
Press 0/10 to select track
number 10.
player, DVD player, MD
deck, DAT deck, or tape deck.
Press 0/10 to select track
number 10.
– select channel numbers of the
VCR, satellite tuner, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO or DVD/HDD
COMBO.
disc recorder, PSX, DVD/
VHS COMBO or DVD/HDD
COMBO.
Press TV (Z) and then press
the numeric buttons to select
the TV channels.
the numeric buttons to select
the TV channels.
I
ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric buttons
of the VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck, satellite
tuner, Blu-ray disc recorder or
PSX.
To enter the value of Sony TV,
press TV (Z) and then press
ENTER.
selecting a channel, disc or
track using the numeric buttons
of the VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck, satellite
tuner, Blu-ray disc recorder or
PSX.
To enter the value of Sony TV,
press TV (Z) and then press
ENTER.
MEMORY
Press to store a station during
tuner operation.
tuner operation.
J
DISPLAY
Press to select information
displayed on the TV screen of
the VCR, VCD player, LD
player, DVD player, CD player,
MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO or DVD/
HDD COMBO.
To select information of Sony
TV, press TV (Z) and then
press DISPLAY.
displayed on the TV screen of
the VCR, VCD player, LD
player, DVD player, CD player,
MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO or DVD/
HDD COMBO.
To select information of Sony
TV, press TV (Z) and then
press DISPLAY.
9
STR-K995
Name
Function
K
OPTIONS
TOOLS
TOOLS
Press to display and select items
from the option menus for DVD
player or DVD/VHS COMBO.
To display the options of Sony
TV, press TV (Z) and then
press OPTIONS TOOLS.
from the option menus for DVD
player or DVD/VHS COMBO.
To display the options of Sony
TV, press TV (Z) and then
press OPTIONS TOOLS.
L
MENU
Press to display the menus of
the receiver, VCR, DVD
player, satellite tuner, Blu-ray
disc recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO on the TV screen.
Then, use V/v/B/b and
the receiver, VCR, DVD
player, satellite tuner, Blu-ray
disc recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO on the TV screen.
Then, use V/v/B/b and
to
perform menu operations.
To display the menus of Sony
TV, press TV (Z) and then
press MENU.
To display the menus of Sony
TV, press TV (Z) and then
press MENU.
M H
a) b)
Press to start playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
X
b)
Press to pause playback or
recording of the VCR, CD
player, VCD player, LD player,
DVD player, MD deck, DAT
deck, tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO. (Also starts
recording with components in
recording standby.)
recording of the VCR, CD
player, VCD player, LD player,
DVD player, MD deck, DAT
deck, tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO. (Also starts
recording with components in
recording standby.)
x
b)
Press to stop playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
m
/
M
b)
Press to
– search tracks in the forward/
– search tracks in the forward/
backward direction of the CD
player, VCD player, DVD
player, LD player, MD deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
player, VCD player, DVD
player, LD player, MD deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
– fast forward/rewind of the
VCR, DAT deck, or tape
deck.
deck.
Name
Function
.
/
>
b)
Press to skip tracks of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO or DVD/
HDD COMBO.
TUNING +/–
Press to scan a station.
REPLAY /
ADVANCE
ADVANCE
Press to replay the previous
scene or fast forward the
current scene of the DVD
player, Blu-ray disc recorder,
DVD/VHS COMBO or DVD/
HDD COMBO.
scene or fast forward the
current scene of the DVD
player, Blu-ray disc recorder,
DVD/VHS COMBO or DVD/
HDD COMBO.
N
TV CH +
a)
/–
Press TV (Z) and then press
TV CH +/– to select preset TV
channels.
TV CH +/– to select preset TV
channels.
PRESET
+
a)
/–
Press to
– select preset stations.
– select preset channels of the
– select preset stations.
– select preset channels of the
VCR, satellite tuner, Blu-ray
disc recorder, DVD player,
DVD/VHS COMBO or
DVD/HDD COMBO.
disc recorder, DVD player,
DVD/VHS COMBO or
DVD/HDD COMBO.
O
F1, F2
Press F1 or F2 to select a
component.
– DVD/HDD COMBO
component.
– DVD/HDD COMBO
F1: HDD mode
F2: DVD mode
– DVD/VHS COMBO
F1: DVD mode
F2: VHS mode
TV INPUT
Press TV (Z) and then press
TV INPUT to select the input
signal (TV input or video
input).
TV INPUT to select the input
signal (TV input or video
input).
WIDE
Press TV (Z) and then press
WIDE to select the wide
picture mode.
WIDE to select the wide
picture mode.
P
DVD TOP
MENU
MENU
Press to display the menu or
on-screen guide of the DVD
player on the TV screen.
Then, use V/v/B/b and
on-screen guide of the DVD
player on the TV screen.
Then, use V/v/B/b and
to
perform menu operations.
DVD MENU
Press to display the menu of
the DVD player on the TV
screen. Then, use V/v/B/b and
the DVD player on the TV
screen. Then, use V/v/B/b and
to perform menu
operations.
10
STR-K995
a)
The number 5, PRESET +, TV CH + and H
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
b)
The button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
PORT adapter operation. For details on the
function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Name
Function
Q
TV VOL +/–
Press TV (Z) and then press
TV VOL +/– to adjust the TV
volume level.
TV VOL +/– to adjust the TV
volume level.
MASTER
VOL +/–
Press to adjust the volume
level of all speakers at the
same time.
level of all speakers at the
same time.
MUTING
Press to mute the sound
(page 35).
To mute the sound of the TV,
press TV (Z) and then press
MUTING.
To mute the sound of the TV,
press TV (Z) and then press
MUTING.
R
DISC SKIP
Press to skip disc of the CD
player, VCD player, DVD
player or MD deck (multi-disc
changer only).
player, VCD player, DVD
player or MD deck (multi-disc
changer only).
S
RETURN/
EXIT
O
Press to
– return to the previous menu.
– exit the menu while the
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO or satellite tuner is
displayed on the TV screen.
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO or satellite tuner is
displayed on the TV screen.
To return to the previous
menu of Sony TV, press TV
(Z) and then press
RETURN/EXIT O.
menu of Sony TV, press TV
(Z) and then press
RETURN/EXIT O.
T
V/v/B/b
After pressing RECEIVER
(D), press MENU (L) for
receiver operation, then press
V/v/B/b to select the settings.
After pressing DVD TOP
MENU (P) or DVD MENU
(P), press V/v/B/b to select
the settings, and then press
(D), press MENU (L) for
receiver operation, then press
V/v/B/b to select the settings.
After pressing DVD TOP
MENU (P) or DVD MENU
(P), press V/v/B/b to select
the settings, and then press
to enter the selection.
Press
also
to enter the
selection of the receiver,
VCR, satellite tuner, DVD
player, Blu-ray disc recorder,
PSX, DVD/VHS COMBO or
DVD/HDD COMBO.
VCR, satellite tuner, DVD
player, Blu-ray disc recorder,
PSX, DVD/VHS COMBO or
DVD/HDD COMBO.
U
GUIDE
Press to display the EPG
(Electronic Program Guide)
of the TV, DVD player,
satellite tuner, Blu-ray disc
recorder, PSX or DVD/HDD
COMBO.
(Electronic Program Guide)
of the TV, DVD player,
satellite tuner, Blu-ray disc
recorder, PSX or DVD/HDD
COMBO.
Name
Function
V
-/--
Press to select the channel
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV
(Z) and then press -/--.
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV
(Z) and then press -/--.
CLEAR
Press to clear a mistake when
you press the incorrect
numeric button of the DVD
player, Blu-ray disc recorder,
PSX, satellite tuner, DVD/
VHS COMBO or DVD/HDD
COMBO.
you press the incorrect
numeric button of the DVD
player, Blu-ray disc recorder,
PSX, satellite tuner, DVD/
VHS COMBO or DVD/HDD
COMBO.
>10
Press to select track numbers
over 10 of the CD player,
VCD player, LD player, MD
deck, tape deck, TV, VCR or
satellite tuner.
over 10 of the CD player,
VCD player, LD player, MD
deck, tape deck, TV, VCR or
satellite tuner.
W
FM MODE
Press to select FM monaural
or stereo reception.
or stereo reception.
X
SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
Timer function and the
duration which the receiver
turns off automatically.
Y
RM SET UP
Press to set up the remote.
Z
TV
Press to light up the button. It
changes the remote key
function to activate the
buttons with orange printing.
It also activate the DISPLAY
(J), OPTIONS TOOLS
(K), MENU (L),
RETURN/EXIT O (S),
changes the remote key
function to activate the
buttons with orange printing.
It also activate the DISPLAY
(J), OPTIONS TOOLS
(K), MENU (L),
RETURN/EXIT O (S),
(T) and V/v/B/b (T)
buttons to perform menu
operations for Sony TVs only.
operations for Sony TVs only.
Notes
Some functions explained in this section may not
work depending on the model.
The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
The AUX button on the remote is not available for
receiver operation.
11
STR-K995
5. Turn the INPUT SELECTOR dial once again. All segments
turn off.
6. Every turning of the INPUT SELECTOR dial turns on each
segment one after another in the same order.
SWAP ALL MODE
The signal will be swapped to all channels so that all speakers will
have sound output.
Procedure:
have sound output.
Procedure:
1. While depressing the SPEAKERS (OFF/A/B/A+B) and the
A.F.D. buttons simultaneously, press the power ?/1 button
to turn on the main power.
to turn on the main power.
2. “SWAP” appears. (No change while displayed.)
SHIPMENT MODE
All preset contents are reset to the default setting.
Procedure:
Procedure:
1. While depressing the SPEAKERS (OFF/A/B/A+B) and the
MUSIC buttons simultaneously, press the power ?/1 but-
ton to turn on the main power.
ton to turn on the main power.
2. “CLEARED” appears and switch off the set.
PROTECTOR
If an error occurs, the “Protector Display” will flash for a while and
the power is turned OFF.
Procedure:
the power is turned OFF.
Procedure:
1. While depressing the TUNING – and the A.F.D. buttons
simultaneously, press the power ?/1 button to turn on the
main power.
main power.
2. “PROTEVER” appears (3 seconds).
DCAC FACTORY TEST MODE
DCAC Factory Test mode have two stages:
1. DCAC DSP Data Line Checking
2. DCAC board Checking
2. DCAC board Checking
Factory Test System Setup
1. When power off :
Press the three buttons MEMORY/ENTER + MOVIE +
?/1 .
“DCAC[]FTM” appears.
Afterward, press the TUNING MODE to start DCAC factory
test mode.
?/1 .
“DCAC[]FTM” appears.
Afterward, press the TUNING MODE to start DCAC factory
test mode.
DSP Data Line
Check
Start
Pass
Pass
Auto Cal Mic
Check
END
SPK Front Left
DCAC MIC
Receiver
SECTION 2
TEST MODE
SOUND FIELD CLEAR MODE
The preset sound field is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While depressing the 2CH button, press the power ?/1
button to turn on the main power.
2. The message “S.F. CLR.” appears and initialization is
performed. (3 second)
SOFTWARE VERSION DISPLAY MODE
The software version is displayed.
Procedure:
Procedure:
1. While depressing the SPEAKERS (OFF/A/B/A+B) and the
DISPLAY buttons simultaneously, press the power ?/1
button to turn on the main power.
button to turn on the main power.
2. The model name, destination and the software version are
displayed. (8 second)
KEY CHECK MODE
Button check
Procedure:
Procedure:
1. While depressing the SPEAKERS (OFF/A/B/A+B) and the
2CH buttons simultaneously, press the power ?/1 button to
turn on the main power.
“REST 13” appears.
turn on the main power.
“REST 13” appears.
2. Every pressing of any button other than ?/1 counts down
the buttons. The buttons which are already counted once are
not counted again.
not counted again.
3. When all buttons are pressed “REST 00” appears.
FLUORESCENT INDICATOR TUBE TEST MODE
All fluorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While depressing the TUNING MODE and the DISPLAY
buttons simultaneously, press the power ?/1 button to turn
on the main power.
on the main power.
2. All segments turn on.
•
•
Blue LED of MULTI CHANNEL DECODING lights.
3. Turn the INPUT SELECTOR dial.
•
•
Blue LED of MULTI CHANNEL DECODING is turned off.
4. Turn the INPUT SELECTOR dial once again.
•
•
Blue LED of MULTI CHANNEL DECODING lights.
MEMORY
L
C
R
SL
S
SR
SB SBR
SBL
SW
LFE
SP A
SP B
SP B
CAT
NEO:6
SAT
D.RANGE
RDS ST
MONO
DTS-ES
96 / 24
Blue LED
HDMI
COAX
D EX
;
OPT
MULTI CHANNEL DECODING
;
PL II x
;
PL
dB
k Hz
mft.
MHz
L
R
S
LFE
SP B
NEO:6
D.RANGE
MONO
COAX
k
m
MHz
RDS
x
Blue LED
MULTI CHANNEL DECODING
MEMORY
LFE
EX
CAT
SAT
96/24
NEO:6
-ES
OPT
HDMI COAX
SPA
SPB
;
PL ll X
dB
D.RANGE
Hz
ft.
ST
MONO
Blue LED
MULTI CHANNEL DECODING
Click on the first or last page to see other HT-DDW995 / STR-K995 service manuals if exist.