Sony HT-DDW995 / STR-K995 Service Manual ▷ View online
5
STR-K995
About the indicators on the display
SW
LFE
SP A
SP B
SP B
L
C
SL
S
;
D
;
PL
;
PL II
OPT
DTS
MEMORY
ST
MONO
D.RANGE
R
SR
COAX
HDMI
1
2
3
4
6
7
9
8
5
q;
qa
qf
qs
qd
Name
Function
A
SW
Lights up when the audio signal
is output from the SUB
WOOFER jack.
is output from the SUB
WOOFER jack.
B
LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C
SP A/SP B
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if headphones are
connected.
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if headphones are
connected.
D ;
D
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 59).
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 59).
E ;
PL/
;
PL II
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PL II” lights up when the
Pro Logic II Movie or Music
decoder is activated.
Pro Logic II Movie or Music
decoder is activated.
Name
Function
F
OPT
Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
OPTICAL jack, or when
INPUT MODE is set to “OPT
IN” (page 59).
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
OPTICAL jack, or when
INPUT MODE is set to “OPT
IN” (page 59).
G
DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 59).
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 59).
H
MEMORY
Lights up when a memory
function, such as Preset
Memory (page 57), etc., is
activated.
function, such as Preset
Memory (page 57), etc., is
activated.
I
Tuner
indicators
indicators
Lights up when using the
receiver to tune in radio stations
(page 54), etc.
receiver to tune in radio stations
(page 54), etc.
J
Preset
station
indicators
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 56.
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 56.
K
D.RANGE
Lights up when dynamic range
compression is activated (page
42).
compression is activated (page
42).
L
COAX
Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
IN” (page 59).
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
IN” (page 59).
M
HDMI
Lights up when the receiver
recognizes a component
connected via a HDMI IN jack
(page 20).
recognizes a component
connected via a HDMI IN jack
(page 20).
N
Playback
channel
indicators
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
L C R
SL SR
SW
6
STR-K995
Rear panel
2
5
6
4
3
1
DIGITAL
(ASSIGNABLE)
DMPORT
OPTICAL
SAT
IN
DVD
IN
COAXIAL
ANTENNA
VIDEO 2/
BD IN
AM
HDMI
DVD IN
VIDEO 2/BD IN
OUT
SA-CD/CD/CD-R
TV
L
R
OUT
IN
IN
SAT
AUDIO IN
VIDEO IN
DVD
AUDIO IN
VIDEO IN
VIDEO 1
AUDIO OUT
VIDEO OUT
VIDEO OUT
AUDIO IN
AUDIO OUT
VIDEO IN
L
R
L
R
L
R
SUB
WOOFER
MONITOR
SAT IN
COMPONENT VIDEO
DVD IN
VIDEO 1 IN
Y
P
B
/C
B
P
R
/C
R
MONITOR OUT
SPEAKERS
FRONT B
FRONT A
L
R
R
SURROUND
L
L
R
CENTER
A
DIGITAL INPUT/OUTPUT section
OPTICAL
IN jack
Connects to a DVD
player, etc. The
COAXIAL jack
provides a better
quality of loud
sound (page 23,
25).
player, etc. The
COAXIAL jack
provides a better
quality of loud
sound (page 23,
25).
COAXIAL IN
jack
jack
HDMI IN/
OUT jack
a)
Connects to a DVD
player, or a Blu-ray
disc player. The
image and the
sound are output to
a TV or a projector
(page 20).
player, or a Blu-ray
disc player. The
image and the
sound are output to
a TV or a projector
(page 20).
DMPORT
jack
Connect to a
DIGITAL MEDIA
PORT adapter
(page 60).
DIGITAL MEDIA
PORT adapter
(page 60).
B
COMPONENT VIDEO INPUT/
OUTPUT section
OUTPUT section
COMPONENT
VIDEO
INPUT/
OUTPUT
jack
VIDEO
INPUT/
OUTPUT
jack
a)
Connects to a DVD
player, TV,
satellite tuner, etc.
You can enjoy high
quality image
(page 22, 23, 25).
player, TV,
satellite tuner, etc.
You can enjoy high
quality image
(page 22, 23, 25).
Green
(Y)
Blue
(P
B
/C
B
)
Red
(P
R
/C
R
)
C
SPEAKERS section
Connects to
speakers (page 17).
speakers (page 17).
Connects to sub
woofer (page 17).
woofer (page 17).
D
VIDEO/AUDIO INPUT/OUTPUT
section
section
AUDIO IN/
OUT jack
OUT jack
Connects the video
and audio jacks of a
VCR, a DVD
player, etc.
and audio jacks of a
VCR, a DVD
player, etc.
(page 22–26).
VIDEO IN/
OUT jack
OUT jack
a)
White (L)
Red (R)
Yellow
7
STR-K995
a)
You can watch the selected input image when you
connect the HDMI OUT or MONITOR OUT jack
to a TV (page 22).
connect the HDMI OUT or MONITOR OUT jack
to a TV (page 22).
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details, see “Programming the remote” (page
66).
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details, see “Programming the remote” (page
66).
RM-AAP017
E
AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jack
OUT jack
Connects to Super
Audio CD player,
CD player, etc.
(page 18).
Audio CD player,
CD player, etc.
(page 18).
F
ANTENNA section
FM
ANTENNA
jack
jack
Connects to the FM
wire antenna
supplied with this
receiver (page 27).
wire antenna
supplied with this
receiver (page 27).
AM
ANTENNA
terminals
ANTENNA
terminals
Connects to the AM
loop antenna
supplied with this
receiver (page 27).
loop antenna
supplied with this
receiver (page 27).
White (L)
Red (R)
Remote commander
SYSTEM STANDBY
TUNING –
DISC SKIP
MUTING
TOP MENU MENU
F1
TV INPUT
WIDE
F2
TV VOL
MASTER VOL
TV CH
PRESET
TUNING +
GUIDE
DISPLAY
RETURN/
EXIT
OPTIONS
TOOLS
REPLAY ADVANCE
TV
VIDEO 1 VIDEO 2 VIDEO 3
DVD
SAT
TV
TUNER
2CH
A.F.D.
MOVIE
MUSIC
SLEEP
FM MODE D. TUNING
SA-CD/CD
AUX
DMPORT
RECEIVER
RM SET UP
?/1
MEMORY
.
>
m
M
x
X
MENU
H
CLEAR
>10
– /– –
<
<
DVD
2
3
4
5
6
7
8
9
ENTER
0/10
1
AV
?/1
AUTO CAL
B
V
v
B
1
6
2
9
q;
qa
qj
qk
ql
wa
w;
qd
qf
qg
qs
4
5
7
8
3
qh
ws
wh
wf
wd
wg
8
STR-K995
Name
Function
A
AV
?
/
1
(on/standby)
Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (Z) and then press AV
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (Z) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (3).
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (3).
B ?
/
1
(on/standby)
Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C
Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components as follows.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote” on
page 66.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components as follows.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote” on
page 66.
Button
Assigned Sony
component
component
VIDEO 1
VCR (VTR mode 3)
VIDEO 2
VCR (VTR mode 2)
VIDEO 3
VCR (VTR mode 1)
DVD
DVD player
SAT
Satellite tuner
TV
TV
SA-CD/CD Super Audio CD/
CD player
TUNER
Built-in tuner
AUX
Not assigned
DMPORT
DIGITAL MEDIA
PORT adapter
PORT adapter
Name
Function
D
RECEIVER
Press to activate the receiver
operation (page 39).
operation (page 39).
E
2CH
Press to select a sound field
(page 49, 51, 53).
(page 49, 51, 53).
A.F.D.
MOVIE
MUSIC
F
D. TUNING
Press to enter direct tuning
mode.
mode.
G
AUTO CAL
Press to activate the Auto
Calibration function.
Calibration function.
H
Numeric
buttons
buttons
(number 5
a)
)
Press to
– preset/tune to preset stations.
– select track numbers of the
– preset/tune to preset stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape deck.
Press 0/10 to select track
number 10.
player, DVD player, MD
deck, DAT deck, or tape deck.
Press 0/10 to select track
number 10.
– select channel numbers of the
VCR, satellite tuner, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO or DVD/HDD
COMBO.
disc recorder, PSX, DVD/
VHS COMBO or DVD/HDD
COMBO.
Press TV (Z) and then press
the numeric buttons to select
the TV channels.
the numeric buttons to select
the TV channels.
I
ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric buttons
of the VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck, satellite
tuner, Blu-ray disc recorder or
PSX.
To enter the value of Sony TV,
press TV (Z) and then press
ENTER.
selecting a channel, disc or
track using the numeric buttons
of the VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck, satellite
tuner, Blu-ray disc recorder or
PSX.
To enter the value of Sony TV,
press TV (Z) and then press
ENTER.
MEMORY
Press to store a station during
tuner operation.
tuner operation.
J
DISPLAY
Press to select information
displayed on the TV screen of
the VCR, VCD player, LD
player, DVD player, CD player,
MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO or DVD/
HDD COMBO.
To select information of Sony
TV, press TV (Z) and then
press DISPLAY.
displayed on the TV screen of
the VCR, VCD player, LD
player, DVD player, CD player,
MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO or DVD/
HDD COMBO.
To select information of Sony
TV, press TV (Z) and then
press DISPLAY.
Click on the first or last page to see other HT-DDW995 / STR-K995 service manuals if exist.