Sony HT-DDW890 / STR-K890 Service Manual ▷ View online
5
STR-K890
About the indicators on the display
SW
LFE
SP A
SP B
SP B
L
C
SL
S
;
D EX
;
PL IIx
;
PL
OPT
DTS
-ES 9 6 / 2 4
MEMORY
RDS ST
MONO
D.RANGE
COAX
NEO:6
SB
R
SR
1
2
3
4
5
7
6
8
q;
9
qa
qs
qg
qf
qd
Name
Function
A
SW
Lights up when the audio signal
is output from the SUB
WOOFER jack.
is output from the SUB
WOOFER jack.
B
LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C
SP A/SP B
Lights up according to the
speaker system used.
However, these indicators do
not light up if the speaker output
is turned off or if a headphone is
connected.
speaker system used.
However, these indicators do
not light up if the speaker output
is turned off or if a headphone is
connected.
D ;
D (EX)
Lights up when the receiver is
decoding Dolby Digital signals.
decoding Dolby Digital signals.
“; D EX” lights up when the
receiver is decoding Dolby
Digital Surround EX signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG”.
receiver is decoding Dolby
Digital Surround EX signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG”.
E ;
PL II (x)
Lights up when the Pro Logic II
Movie/Music/Game decoder is
activated.
Movie/Music/Game decoder is
activated.
“; PL IIx” lights up when the
Pro Logic IIx Movie/Music/
Game decoder is activated.
Note
Dolby Pro Logic IIx decoding
does not function for DTS
format signals or for signals
with a sampling frequency of
more than 48 kHz.
Pro Logic IIx Movie/Music/
Game decoder is activated.
Note
Dolby Pro Logic IIx decoding
does not function for DTS
format signals or for signals
with a sampling frequency of
more than 48 kHz.
Name
Function
F ;
PL
Lights up when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals.
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals.
G
OPT
Lights up when VIDEO 2 input
is selected. However,
“UNLOCK” appears on the
display if no digital signal is
input through the OPTICAL
jack.
“OPT” also lights up when SAT
input is selected if
– INPUT MODE is set to
is selected. However,
“UNLOCK” appears on the
display if no digital signal is
input through the OPTICAL
jack.
“OPT” also lights up when SAT
input is selected if
– INPUT MODE is set to
“AUTO IN” and the source
signal is a digital signal being
input through the OPTICAL
jack.
signal is a digital signal being
input through the OPTICAL
jack.
– INPUT MODE is set to “OPT
IN”.
H
DTS (-ES)/
(96/24)
(96/24)
Lights up when the receiver is
decoding DTS signals.
“DTS-ES” lights up when the
receiver is decoding DTS-ES
signals.
“DTS 96/24” lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG”.
decoding DTS signals.
“DTS-ES” lights up when the
receiver is decoding DTS-ES
signals.
“DTS 96/24” lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG”.
I
MEMORY
Lights up when a memory
function, such as Preset
Memory, etc., is activated.
function, such as Preset
Memory, etc., is activated.
J
Tuner
indicators
indicators
Lights up when using the
receiver to tune in radio stations,
etc.
receiver to tune in radio stations,
etc.
K
Preset
station
indicators
station
indicators
Lights up when using the
receiver to tune in preset radio
stations. For details on
presetting radio stations.
receiver to tune in preset radio
stations. For details on
presetting radio stations.
L
D.RANGE
Lights up when dynamic range
compression is activated.
compression is activated.
M
NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated.
Cinema/Music decoder is
activated.
N
COAX
Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
IN”.
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
IN”.
O
Playback
channel
indicators
channel
indicators
L
R
C
SL
SR
S
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
SW
L
C
R
SL
SR
6
STR-K890
Rear panel
1
2
3
4
5
6
DIGITAL
DMPORT
OPTICAL
SAT
IN
DVD
IN
COAXIAL
ANTENNA
VIDEO 2/
BD IN
AM
SA-CD/CD/CD-R
TV
L
R
OUT
IN
IN
HDMI
DVD IN
VIDEO 2/BD IN
OUT
SAT
AUDIO IN
VIDEO IN
DVD
AUDIO IN
VIDEO IN
VIDEO 1
AUDIO OUT
VIDEO OUT
VIDEO OUT
SAT IN
AUDIO IN
AUDIO OUT
VIDEO IN
L
R
L
R
L
R
SUB
WOOFER
MONITOR
COMPONENT VIDEO
DVD IN
VIDEO 1 IN
Y
P
B
/C
B
P
R
/C
R
MONITOR OUT
SPEAKERS
FRONT B
FRONT A
L
L
R
R
SURROUND
L
R
CENTER
SURROUND BACK
A
DIGITAL INPUT/OUTPUT section
OPTICAL IN
jacks
jacks
Connects to a DVD
player, etc. The
COAXIAL jack
provides a better
quality of loud
sound.
player, etc. The
COAXIAL jack
provides a better
quality of loud
sound.
COAXIAL IN
jacks
jacks
HDMI IN/
OUT jacks*
OUT jacks*
Connects to a DVD
player, or a Blu-ray
disc player. The
image and the
sound are output to
a TV or a projector.
player, or a Blu-ray
disc player. The
image and the
sound are output to
a TV or a projector.
DMPORT
jack
Connects to a
DIGITAL MEDIA
PORT adapter.
DIGITAL MEDIA
PORT adapter.
B
COMPONENT VIDEO INPUT/
OUTPUT section
OUTPUT section
COMPONENT
VIDEO
INPUT/
OUTPUT
jacks*
VIDEO
INPUT/
OUTPUT
jacks*
Connects to a DVD
player, TV,
satellite tuner, etc.
You can enjoy high
quality image.
player, TV,
satellite tuner, etc.
You can enjoy high
quality image.
Green
Blue
Red
C
SPEAKERS section
Connects to
speakers.
speakers.
Connects to sub
woofer.
woofer.
D
VIDEO/AUDIO INPUT/OUTPUT
section
section
AUDIO IN/
OUT jacks
OUT jacks
Connects to the
video and audio
jacks of a VCR,
DVD player, etc.
video and audio
jacks of a VCR,
DVD player, etc.
VIDEO IN/
OUT jacks*
OUT jacks*
E
AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a
Super Audio CD
player, CD
recorder, etc.
Super Audio CD
player, CD
recorder, etc.
White (L)
Red (R)
Yellow
White (L)
Red (R)
* You can watch the selected input image when you
connect the HDMI OUT or MONITOR OUT jack
to a TV.
to a TV.
F
ANTENNA section
FM
ANTENNA
jack
jack
Connects to the
FM wire antenna
supplied with this
receiver.
FM wire antenna
supplied with this
receiver.
AM
ANTENNA
terminals
ANTENNA
terminals
Connects to the
AM loop antenna
supplied with this
receiver.
AM loop antenna
supplied with this
receiver.
7
STR-K890
Name
Function
C
Input buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components as follows.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote”
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components as follows.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote”
Button
Assigned Sony
component
component
VIDEO 1
VCR (VTR mode 3)
VIDEO 2
VCR (VTR mode 2)
VIDEO 3
VCR (VTR mode 1)
DVD
DVD player
SAT
Satellite tuner
TV
TV
SA-CD/CD Super Audio CD/
CD player
TUNER
Built-in tuner
AUX
Not assigned
DMPORT
DIGITAL MEDIA
PORT adapter
PORT adapter
D
RECEIVER
Press to activate the receiver
operation.
operation.
E
D. TUNING
Press to enter direct tuning
mode.
mode.
F
AUTO CAL
Press to activate the Auto
Calibration function.
Calibration function.
G
Numeric
buttons
(number 5
buttons
(number 5
a)
)
Press to
– preset/tune to preset
– preset/tune to preset
stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the VCR, satellite tuner,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
Press TV (wj) and then press
the numeric buttons to select
the TV channels.
the numeric buttons to select
the TV channels.
H
ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric
buttons of the VCR, CD
player, VCD player, LD
player, MD deck, DAT deck,
tape deck, satellite tuner, Blu-
ray disc recorder, or PSX.
To enter the value of Sony
TV, press TV (wj) and then
press ENTER.
selecting a channel, disc or
track using the numeric
buttons of the VCR, CD
player, VCD player, LD
player, MD deck, DAT deck,
tape deck, satellite tuner, Blu-
ray disc recorder, or PSX.
To enter the value of Sony
TV, press TV (wj) and then
press ENTER.
MEMORY
Press to store a station during
tuner operation.
tuner operation.
I
DISPLAY
Press to select information
displayed on the TV screen of
the VCR, VCD player, LD
player, DVD player, CD
player, MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO, or
DVD/HDD COMBO.
To select information of Sony
TV, press TV (wj) and then
press DISPLAY.
displayed on the TV screen of
the VCR, VCD player, LD
player, DVD player, CD
player, MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO, or
DVD/HDD COMBO.
To select information of Sony
TV, press TV (wj) and then
press DISPLAY.
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details,
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details,
see “Programming the remote”.
RM-AAP017
Remote commander
SYSTEM STANDBY
TUNING –
DISC SKIP
MUTING
TOP MENU MENU
F1
TV INPUT
WIDE
F2
TV VOL
MASTER VOL
TV CH
PRESET
TUNING +
GUIDE
DISPLAY
RETURN/
EXIT
OPTIONS
TOOLS
REPLAY ADVANCE
TV
VIDEO 1 VIDEO 2 VIDEO 3
DVD
SAT
TV
TUNER
2CH
A.F.D.
MOVIE
MUSIC
SLEEP
FM MODE D. TUNING
SA-CD/CD
AUX
DMPORT
RECEIVER
RM SET UP
?/1
MEMORY
.
>
m
M
x
X
MENU
H
CLEAR
>10
– /– –
<
<
DVD
2
3
4
5
6
7
8
9
ENTER
0/10
1
AV
?/1
AUTO CAL
B
V
v
B
1
5
2
8
9
q;
qh
qk
w;
ws
wa
ql
qj
qs
qd
qf
qa
4
6
7
3
qg
wd
wj
wh
wg
wf
wk
Name
Function
A
AV
?
/
1
(on/standby)
Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (wj) and then press AV
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (wj) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
B ?
/
1
(on/standby)
Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
8
STR-K890
Name
Function
J
OPTIONS
TOOLS
TOOLS
Press to display and select
items from the option menus
for DVD player or
items from the option menus
for DVD player or
DVD/VHS COMBO.
To display the options of Sony
TV, press TV (wj) and then
press OPTIONS TOOLS.
To display the options of Sony
TV, press TV (wj) and then
press OPTIONS TOOLS.
K
MENU
Press to display the menus of
the receiver, VCR, DVD
player, satellite tuner, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO on the TV screen.
Then, use V/v/B/b and
the receiver, VCR, DVD
player, satellite tuner, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO on the TV screen.
Then, use V/v/B/b and
to
perform menu operations.
To display the menus of Sony
TV, press TV (wj) and then
press MENU.
To display the menus of Sony
TV, press TV (wj) and then
press MENU.
L .
/
>
b)
Press to skip tracks of the
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT deck,
tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT deck,
tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
m
/
M
b)
Press to
– search tracks in the forward/
– search tracks in the forward/
backward direction of the
CD player, VCD player,
DVD player, LD player,
MD deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
CD player, VCD player,
DVD player, LD player,
MD deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
– fast forward/rewind of the
VCR, DAT deck, or tape
deck.
deck.
H
a)b)
Press to start playback of the
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT deck,
tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT deck,
tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
Name
Function
X
b)
Press to pause playback or
recording of the VCR, CD
player, VCD player, LD
player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO. (Also
starts recording with
components in recording
standby.)
recording of the VCR, CD
player, VCD player, LD
player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO. (Also
starts recording with
components in recording
standby.)
x
b)
Press to stop playback of the
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT
deck, tape deck, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO, or DVD/
HDD COMBO.
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT
deck, tape deck, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO, or DVD/
HDD COMBO.
TUNING +/–
Press to scan a station.
M
Press TV (wj) and then
press TV CH +/– to select
preset TV channels.
press TV CH +/– to select
preset TV channels.
PRESET
+
a)
/–
Press to
– select preset stations.
– select preset channels of
– select preset stations.
– select preset channels of
the VCR, satellite tuner,
Blu-ray disc recorder,
DVD player, DVD/VHS
COMBO, or DVD/HDD
COMBO.
Blu-ray disc recorder,
DVD player, DVD/VHS
COMBO, or DVD/HDD
COMBO.
N
F1, F2
Press TV (wj) and then
press F1 or F2 to select a
component.
DVD/HDD COMBO
press F1 or F2 to select a
component.
DVD/HDD COMBO
F1: HDD
F2: DVD
DVD/VHS COMBO
F1: DVD
F2: VHS
TV INPUT
Press TV (wj) and then
press TV INPUT to select
the input signal (TV input or
video input).
press TV INPUT to select
the input signal (TV input or
video input).
WIDE
Press TV (wj) and then
press WIDE to select the
wide picture mode.
press WIDE to select the
wide picture mode.
O
DVD TOP
MENU
MENU
Press to display the menu or
on-screen guide of the DVD
player on the TV screen.
Then, use V/v/B/b and
on-screen guide of the DVD
player on the TV screen.
Then, use V/v/B/b and
to
perform menu operations.
DVD MENU
Press to display the menu of
the DVD player on the TV
screen. Then, use V/v/B/b
and
the DVD player on the TV
screen. Then, use V/v/B/b
and
to perform menu
operations.
P
MUTING
Press to mute the sound.
To mute the sound of the TV,
press TV (wj) and then press
MUTING.
To mute the sound of the TV,
press TV (wj) and then press
MUTING.
Q
TV VOL +/–
Press TV (wj) and then press
TV VOL +/– to adjust the TV
volume level.
TV VOL +/– to adjust the TV
volume level.
MASTER
VOL +/–
Press to adjust the volume
level of all speakers at the
same time.
level of all speakers at the
same time.
R
DISC SKIP
Press to skip disc of the CD
player, VCD player, DVD
player, or MD deck (multi-
disc changer only).
player, VCD player, DVD
player, or MD deck (multi-
disc changer only).
S
REPLAY /
ADVANCE
ADVANCE
Press to replay the previous
scene or fast forward the
current scene of the DVD
player, Blu-ray disc recorder,
DVD/VHS COMBO, or
DVD/HDD COMBO.
scene or fast forward the
current scene of the DVD
player, Blu-ray disc recorder,
DVD/VHS COMBO, or
DVD/HDD COMBO.
T
RETURN/
EXIT
O
Press to
– return to the previous menu.
– exit the menu while the
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or satellite tuner
is displayed on the TV
screen.
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or satellite tuner
is displayed on the TV
screen.
To return to the previous
menu of Sony TV, press TV
(wj) and then press
RETURN/EXIT O.
menu of Sony TV, press TV
(wj) and then press
RETURN/EXIT O.
<
<
Click on the first or last page to see other HT-DDW890 / STR-K890 service manuals if exist.