Sony HT-DDW5000 / STR-KM5000 Service Manual ▷ View online
STR-KM5000
5
About the indicators on the display
SW
LFE
L
C
SL S
D EX
PLIIx
PL
OPT
DTS -ES 96/24
MEMORY
ST
MONO
D.RANGE
COAX
HDMI
NEO:6
SB
R
SR
R
RG
RT
RE
RB
Name
Function
" SW
Lights up when the audio signal
is output from the
SUBWOOFER jack.
is output from the
SUBWOOFER jack.
# LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
$ D/
D EX
“D” lights up when Dolby
Digital signals are input.
“D EX” lights up when
Dolby Digital Surround EX
signals are decoded.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO”.
signals are decoded.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO”.
% PL/
PLII/
PLIIx
PLIIx
“PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
processing to 2 channel signals
in order to output the center and
surround channel signals.
“PLII” lights up when the
Pro Logic II Movie/Music/
Game decoder is activated.
“PLIIx” lights up when the
Game decoder is activated.
“PLIIx” lights up when the
Pro Logic IIx Movie/Music/
Game decoder is activated.
Note
Dolby Pro Logic IIx decoding
does not function for DTS
format signals or for signals
with a sampling frequency of
more than 48 kHz.
Game decoder is activated.
Note
Dolby Pro Logic IIx decoding
does not function for DTS
format signals or for signals
with a sampling frequency of
more than 48 kHz.
Name
Function
& OPT
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack.
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack.
' DTS/
DTS-ES/
DTS 96/24
“DTS” lights up when the
receiver is decoding DTS
signals.
“DTS-ES” lights up when the
receiver is decoding DTS-ES
signals.
“DTS 96/24” lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO”.
receiver is decoding DTS
signals.
“DTS-ES” lights up when the
receiver is decoding DTS-ES
signals.
“DTS 96/24” lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO”.
+ D.RANGE
Lights up when dynamic range
compression is activated.
compression is activated.
, NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated.
Cinema/Music decoder is
activated.
- COAX
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack.
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack.
. HDMI
Lights up when the receiver
recognizes a component
connected via an HDMI IN jack.
recognizes a component
connected via an HDMI IN jack.
/ Playback
channel
indicators
indicators
L
R
C
SL
SR
S
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
SW
L
C
SL
R
SR
( MEMORY
Lights up when a memory
function, such as Preset
Memory, etc., is activated.
function, such as Preset
Memory, etc., is activated.
) Tuner
indicators
Lights up when using the
receiver to tune in radio stations
, etc.
receiver to tune in radio stations
, etc.
* Preset
station
indicators
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations.
receiver to tune in radio stations
you have preset. For details on
presetting radio stations.
STR-KM5000
6
Rear panel
DVD IN
BD IN
OUT
OPTICAL
COAXIAL
BD
IN
SAT
IN
DVD
IN
HDMI
VIDEO
OUT
SAT IN
DVD IN
BD IN
MONITOR OUT
VIDEO
IN
AUDIO
OUT
AUDIO
IN
VIDEO
IN
AUDIO
IN
VIDEO
IN
AUDIO
IN
AUDIO
OUT
SUBWOOFER
Y
P
B
/
C
B
P
R
/
C
R
SURROUND
FRONT: ONLY FOR SS-MSP5000
CENTER: ONLY FOR SS-CNP5000
SURROUND: ONLY FOR SS-SRP5000
CENTER: ONLY FOR SS-CNP5000
SURROUND: ONLY FOR SS-SRP5000
SURROUND
BACK
CENTER
L
R
FRONT
L
R
SPEAKERS
DMPORT
DIGITAL
AM
ANTENNA
L
R
L
R
SA-CD/CD/CD-R
IN
IN
OUT
TV
SAT
DVD
VIDEO 1
VIDEO
OUT
MONITOR
COMPONENT VIDEO
DC5V
0.7A MAX
" DIGITAL INPUT/OUTPUT section
OPTICAL
IN jacks
Connects to a DVD
player, etc. The
COAXIAL jack
provides a better
sound quality.
player, etc. The
COAXIAL jack
provides a better
sound quality.
COAXIAL IN
jack
jack
HDMI IN/
OUT* jacks
OUT* jacks
Connects to a DVD
player, etc. The
image and the sound
are output to a TV.
player, etc. The
image and the sound
are output to a TV.
# ANTENNA section
FM
ANTENNA
jack
jack
Connects to the
supplied FM wire
antenna.
supplied FM wire
antenna.
AM
ANTENNA
terminals
ANTENNA
terminals
Connects to the
supplied AM loop
antenna.
supplied AM loop
antenna.
$ COMPONENT VIDEO INPUT/
OUTPUT section
Y, P
B
/C
B
,
P
R
/C
R
IN/
OUT* jacks
Connects to a DVD
player, TV, satellite
tuner, etc. You can
enjoy high quality
image.
player, TV, satellite
tuner, etc. You can
enjoy high quality
image.
% SPEAKERS section
Connects to the
supplied speakers .
supplied speakers .
Green
(Y)
(Y)
Blue
(P
B
/C
B
)
Red
(P
R
/C
R
)
*You can watch the selected input image when you
connect the HDMI OUT or MONITOR OUT jack
to a TV.
to a TV.
& AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a Super
Audio CD player,
etc.
Audio CD player,
etc.
AUDIO OUT
jacks
jacks
Connects to the
supplied
subwoofers.
supplied
subwoofers.
' VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a VCR,
DVD player, etc.
DVD player, etc.
VIDEO IN/
OUT* jacks
OUT* jacks
( DMPORT
DMPORT
jack
Connects to a
DIGITAL MEDIA
PORT adapter.
DIGITAL MEDIA
PORT adapter.
White (L)
Red (R)
Black
White (L)
Red (R)
Yellow
STR-KM5000
7
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate. For details, see “Changing button
assignments”.
receiver and to control the Sony audio/video
components that the remote is assigned to
operate. For details, see “Changing button
assignments”.
RM-AAU027
Remote commander
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP DMPORT
VIDEO1
VIDEO2
BD
DVD
2CH
A.F.D.
TV CH –
PRESET –
TV CH +
PRESET +
TUNING –
TV
TUNING +
FM MODE
MOVIE
MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
SAT
TV
SA-CD/CD TUNER
)
.
N
9
Y
5
REPLAY ADVANCE
MEMORY
0
RETURN/EXIT
>10/
-/--
RH
RK
RL
RI
RM
X
XB
RG
R
RE
RT
RB
TV
AV
TOOLS/
OPTIONS
MENU/HOME
Name
Function
" TV /
(on/standby)
Press TV / and TV (/) at
the same time to turn the TV on
or off.
or off.
AV /
(on/standby)
Press to turn on or off the Sony
audio/video components that
the remote is assigned to
operate.
If you press / (#) at the
audio/video components that
the remote is assigned to
operate.
If you press / (#) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV /
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV /
switch changes automatically
each time you press the input
buttons ($).
each time you press the input
buttons ($).
# /
(on/standby)
Press to turn the receiver on or
off.
To turn off all components,
press / and AV / (") at
off.
To turn off all components,
press / and AV / (") at
the same time (SYSTEM
STANDBY).
STANDBY).
$ Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can change
the button assignments
following the steps in
“Changing button assignments”.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can change
the button assignments
following the steps in
“Changing button assignments”.
% 2CH
Press to select a sound field.
A.F.D.
MOVIE
MUSIC
& DVD/BD
MENU
Press to display the menu of the
DVD or Blu-ray disc on the TV
screen. Then, use 7, W, #, C and
DVD or Blu-ray disc on the TV
screen. Then, use 7, W, #, C and
(1) to perform menu
operations.
' AUTO CAL
Press to activate the Auto
Calibration function.
Calibration function.
( D.TUNING
Press to enter direct tuning
mode.
mode.
D.SKIP
Press to skip a disc when using
a multi-disc changer.
a multi-disc changer.
Name
Function
) AMP MENU
Press to display the menu of
the receiver. Then, use 7, W,
#, C and
the receiver. Then, use 7, W,
#, C and
(1) to perform
menu operations.
* ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric
buttons of the TV, VCR or
satellite tuner.
selecting a channel, disc or
track using the numeric
buttons of the TV, VCR or
satellite tuner.
MEMORY
Press to store a station.
+ MUTING
Press to turn off the sound
temporarily.
Press MUTING again to
restore the sound.
Press MUTING and TV (/)
temporarily.
Press MUTING again to
restore the sound.
Press MUTING and TV (/)
at the same time to activate
the TV’s muting function.
the TV’s muting function.
, TV VOL
+
a)
/–
Press TV VOL +/– and TV
(/) at the same time to adjust
(/) at the same time to adjust
the TV volume level.
MASTER
VOL +
a)
/–
Press to adjust the volume
level of all speakers at the
same time.
level of all speakers at the
same time.
- MENU/HOME Press to display the menu of
the VCR, DVD player,
satellite tuner or Blu-ray disc
player on the TV screen.
Press MENU/HOME and TV
(/) at the same time to
satellite tuner or Blu-ray disc
player on the TV screen.
Press MENU/HOME and TV
(/) at the same time to
display the TV’s menu. Then,
use 7, W, #, C and
use 7, W, #, C and
(1) to
perform menu operations.
. /
b)
Press to skip a track of the CD
player, DVD player or Blu-
ray disc player.
player, DVD player or Blu-
ray disc player.
REPLAY
/
ADVANCE
Press to replay the previous
scene or fast forward the
current scene of the VCR,
DVD player or Blu-ray disc
player.
scene or fast forward the
current scene of the VCR,
DVD player or Blu-ray disc
player.
N/.
b)
Press to
– search tracks in the forward/
– search tracks in the forward/
reverse direction of the
DVD player.
DVD player.
– start fast forward/rewind of
the VCR, CD player or Blu-
ray disc player.
ray disc player.
)
a)b)
Press to start playback of the
VCR, CD player, DVD player
or Blu-ray disc player.
VCR, CD player, DVD player
or Blu-ray disc player.
STR-KM5000
8
Name
Function
9
b)
Press to pause playback or
recording of the VCR, CD
player, DVD player or Blu-
ray disc player. (Also starts
recording with components in
recording standby.)
recording of the VCR, CD
player, DVD player or Blu-
ray disc player. (Also starts
recording with components in
recording standby.)
Y
b)
Press to stop playback of the
VCR, CD player, DVD player
or Blu-ray disc player.
VCR, CD player, DVD player
or Blu-ray disc player.
TV CH +/–
Press TV CH +/– and TV (
/)
at the same time to select
preset TV channels.
preset TV channels.
PRESET +/–
Press to select
– preset stations.
– preset channels of the VCR
– preset stations.
– preset channels of the VCR
or satellite tuner.
TUNING +/–
Press to scan a station.
FM MODE
Press to select the FM
monaural or stereo reception.
monaural or stereo reception.
/ TV
Press TV and the button with
orange printing at the same
time to enable the TV
operation.
orange printing at the same
time to enable the TV
operation.
0 RETURN/
EXIT
0
Press to
– return to the previous menu.
– exit the menu while the
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCR, DVD player,
satellite tuner or Blu-ray
disc player is displayed on
the TV screen.
the VCR, DVD player,
satellite tuner or Blu-ray
disc player is displayed on
the TV screen.
Press RETURN/EXIT
0
and TV (
/) at the same time
to return to the previous menu
or exit the TV’s menu while
the menu is displayed on the
TV screen.
or exit the TV’s menu while
the menu is displayed on the
TV screen.
1
After pressing DVD/BD
MENU (
MENU (
&), AMP MENU
(
)) or MENU/HOME (-),
press
7, W, # or C to select the
settings. Then, press
to
enter the selection if you have
pressed DVD/BD MENU or
MENU/HOME previously.
Press
pressed DVD/BD MENU or
MENU/HOME previously.
Press
also to enter the
selection of the receiver,
VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Name
Function
2 DISPLAY
Press to select information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Press DISPLAY and TV (
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player or Blu-
ray disc player.
Press DISPLAY and TV (
/)
at the same time to display
TV’s information on the TV
screen.
TV’s information on the TV
screen.
3 TOOLS/
OPTIONS
Press to display and select the
options of the DVD player or
Blu-ray disc player.
Press TOOLS/OPTIONS and
TV (
options of the DVD player or
Blu-ray disc player.
Press TOOLS/OPTIONS and
TV (
/) at the same time to
display options applicable to
the Sony TV.
the Sony TV.
4 -/--
Press to select the channel
entry mode, either one or two
digits of the VCR.
Press -/-- and TV (
entry mode, either one or two
digits of the VCR.
Press -/-- and TV (
/) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
channel entry mode, either
one or two digits of the TV.
>10/
Y
Press to select
– track numbers over 10 of the
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
player.
– channel numbers of the
Digital CATV terminal.
CLEAR
Press to clear a mistake when
you press the incorrect
numeric button.
you press the incorrect
numeric button.
5 Numeric
buttons
(number 5
(number 5
a)
)
Press to
– preset/tune to preset
– preset/tune to preset
stations.
– select track numbers of the
CD player, DVD player or
Blu-ray disc player. Press 0/
10 to select track number 10.
Blu-ray disc player. Press 0/
10 to select track number 10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (
TV (
/) at the same time to
select the TV channels.
6 TV INPUT
Press TV INPUT and TV (
/)
at the same time to select the
input signal (TV input or
video input).
input signal (TV input or
video input).
SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
Timer function and the
duration which the receiver
turns off automatically.
Name
Function
a)
The number 5, MASTER VOL +, TV VOL + and
) buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
) buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
b)
This button is also available for DIGITAL
MEDIA PORT adapter operation. For details on
the function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
MEDIA PORT adapter operation. For details on
the function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
Click on the first or last page to see other HT-DDW5000 / STR-KM5000 service manuals if exist.