Sony HT-DDW2500 / HT-DDW3000 / SS-CNP3000 / SS-CRP3000 / SS-MSP3000 / SS-SRP3000 / SS-WP3000 Service Manual ▷ View online
SERVICE MANUAL
Published by Sony Techno Create Corporation
Sony Corporation
Audio&Video Business Group
SS-CNP3000/CRP3000/MSP3000/
SRP3000/WP3000
SPECIFICATIONS
SPEAKER SYSTEM
9-889-077-03
2009C05-1
©
2009.03
Singapore Model
Thai Model
SS-CNP300/CRP3000/MSP3000/SRP3000/WP3000
South African Model
SS-WP3000
Ver. 1.2 2009.03
• SS-CNP3000 is the center speaker in HT-DDW3000.
• SS-MSP3000 is the front speaker in HT-DDW3000.
• SS-SRP3000 is the surround speaker in HT-DDW3000.
• SS-WP3000 is the subwoofer in HT-DDW2500/DDW3000.
• SS-CRP3000 is composed of SS-CNP3000, SS-MSP3000 and SS-SRP3000.
• SS-MSP3000 is the front speaker in HT-DDW3000.
• SS-SRP3000 is the surround speaker in HT-DDW3000.
• SS-WP3000 is the subwoofer in HT-DDW2500/DDW3000.
• SS-CRP3000 is composed of SS-CNP3000, SS-MSP3000 and SS-SRP3000.
SS-CRP3000 COMPONENT MODEL NAME
SS-CRP3000
Front speaker
SS-MSP3000
Center speaker
SS-CNP3000
Surround speaker
SS-SRP3000
• Front speaker (SS-MSP3000)
Speaker system
2-way, Bass refl ex, Magnetically shielded
Speaker
unit
Woofer:
160 mm, cone type
Tweeter:
25 mm, horn type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
230 × 905 × 285 mm (with foot)
Mass (Approx.)
11 kg
• Center speaker (SS-CNP3000)
Speaker system
2-way, 3-driver, Bass refl ex,
Magnetically
shielded
Speaker
unit
Woofer:
100 mm, cone type × 2
Tweeter:
25 mm, horn type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
515 × 175 × 225 mm (with foot)
Mass (Approx.)
4.8 kg
• Surround speaker (SS-SRP3000)
Speaker system
Full range, Bass refl ex
Speaker
unit
Woofer:
100 mm, cone type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
174 × 220 × 166 mm (with foot)
Mass (Approx.)
1.4 kg
• Subwoofer (SS-WP3000)
Speaker system
Bass refl ex, Magnetically shielded
Speaker unit
200 mm, cone type
Rated Impedance 10 ohms
Dimensions (width/height/depth) (Approx.)
Dimensions (width/height/depth) (Approx.)
275 × 345 × 305 mm (with foot)
Mass (Approx.)
5.8 kg
Design and specifi cations are subject to change without notice.
Photo: SS-CNP3000
Photo: SS-MSP3000
Photo: SS-SRP3000
Photo: SS-WP3000
• JIG
When disassembling the set, use the following jig (for speaker
When disassembling the set, use the following jig (for speaker
removal).
Part No.: J-2501-238-A
JIG FOR SPEAKER REMOVAL
JIG FOR SPEAKER REMOVAL
SS-CNP3000/CRP3000/MSP3000/SRP3000/WP3000
2
SECTION 1
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
1-1. FRONT PANEL ASSY (SS-WP3000)
1-2. FRONT PANEL ASSY (SS-CNP3000)
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
six bosses
front panel assy
Insert a flat-tip screwdriver into a recess
in the bottom of the set
to raise the front panel assy a little.
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not
to injure front panel and speaker cabinet.
nine bosses
front panel assy
Insert a flat-tip screwdriver
into a recess in the bottom of the set
to raise the front panel assy a little.
SS-CNP3000/CRP3000/MSP3000/SRP3000/WP3000
3
Insert the jig (J-2501-238-A) into a space
and raise the front panel assy gradually.
Note:
When using a jig, please work so as not to injure
front panel and speaker cabinet.
Insert the jig (J-2501-238-A) into a space
and raise the duct panel assy gradually.
Note:
When using a jig, please work
so as not to injure duct panel assy
and
speaker
cabinet.
Insert the jig (J-2501-238-A) into a space
and raise the duct panel assy gradually.
Note:
When using a jig, please work
so as not to injure duct panel assy
and
speaker
cabinet.
six bosses
twelve bosses
front panel assy
duct panel assy
1-3. FRONT PANEL ASSY, DUCT PANEL ASSY (SS-MSP3000)
SS-CNP3000/CRP3000/MSP3000/SRP3000/WP3000
4
SECTION 2
EXPLODED VIEWS
1
A-1506-531-A FRONT
PANEL
ASSY
2
4-874-614-02 SCREW (1) (3.5X14), TAPPING
SP1
1-826-935-11 LOUDSPEAKER (20 cm)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice.
vice.
Some delay should be anticipated when
ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
R
R
Parts Color Cabinet’s Color
2-1. SS-WP3000
1
2
SP1
not supplied
not
supplied
not supplied
Display
