DOWNLOAD Sony HT-DDW1600 / STR-K1600 Service Manual ↓ Size: 4.02 MB | Pages: 68 in PDF or view online for FREE

1

E Model

Australian Model

Power Output

 1)

Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)

90 W + 90 W

 1)

85 W + 85 W

 3)

Surround mode output (reference)

 2)

RMS output

FRONT:

185 W per channel

 1)

170 W per channel

 3)

(with SS-MSP16)

CENTER:

185 W

 1)

170 W

 3)

(with SS-CNP16)

SURROUND:

185 W per channel

 1)

170 W per channel

 3)

(with SS-SRP16)

SURROUND BACK:

185 W

 1)

170 W

 3)

(with SA-WP16)

1) Measured under the following conditions:

Area code

Power requirements

E51, AUS, MY, SP, TH

240 V AC, 50 Hz

MX

127 V AC, 60 Hz

AR

230 V AC, 50 Hz

2) Reference power output for front, center surround and

surround back speakers. Depending on the sound field
settings and the source, there may be no sound output.

3) Measured under the following conditions:

Area code

Power requirements

AR

220 V AC, 50 Hz

2007D04-1

© 2007. 04

Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, “Surround EX”, and the double-D
symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS-ES | Neo:6” are registered
trademarks of DTS, Inc. “96/24” is a trademark of
DTS, Inc.

This receiver incorporates High-Definition
Multimedia Interface (HDMI

TM

) technology.

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.

– Continued on next page –

Photo: Silver type

2

Inputs

Analog

Sensitivity: 800 mV/
50 kohms

Digital (Coaxial)

Impedance: 75 ohms

Outputs (Analog)

AUDIO OUT

Voltage: 800 mV/10 kohms

SUB WOOFER

Voltage: 2 V/1 kohm

Tone

Gain levels

±6 dB, 1 dB step

Reproduction frequency range:

28 – 20,000 Hz

Tuning range

87.5 – 108.0 MHz

Antenna

FM wire antenna

Antenna terminals

75 ohms, unbalanced

Intermediate frequency

10.7 MHz

Tuning range

Models of area code AUS, MY, SP, TH
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code E51
With 10-kHz tuning scale: 530 – 1,610 kHz 

4)

With 9-kHz tuning scale: 531 – 1,602 kHz 

4)

Models of area code AR, MX
With 10-kHz tuning scale: 530 – 1,610 kHz

Antenna

Loop antenna

Intermediate frequency

450 kHz

4) You can change the AM tuning scale to 9 kHz or 10 kHz.

After tuning in any AM station, turn off the receiver.
While holding down TUNING MODE, press ?/1. All
preset stations will be erased when you change the tuning
scale. To reset the scale to 10 kHz (or 9 kHz), repeat the
procedure.

Inputs/Outputs

Video:

1 Vp-p, 75 ohms

COMPONENT VIDEO:

Y: 1 Vp-p, 75 ohms
P

B

/C

B

: 0.7 Vp-p,

75 ohms
P

R

/C

R

: 0.7 Vp-p,

75 ohms
80 MHz HD Pass Through

Power requirements

Area code

Power requirements

AUS

240 V AC, 50 Hz

MY, SP

230 – 240 V AC, 50/60 Hz

AR, TH

220 – 230 V AC, 50/60 Hz

MX

127 V AC, 60 Hz

E51

120/220/240 V AC, 50/60 Hz

Power output (DIGITAL MEDIA PORT)
(Models of area code AUS, MY, SP, TH only)

DC OUT:

5 V, 700 mA

Power consumption

200 W

Power consumption (during standby mode)

0.3 W

Dimensions (w/h/d) (Approx.)

430 

×

 157.5 

×

 316 mm

including projecting
parts and controls

Mass (Approx.)

8.0 kg

Design and specifications are subject to change
without notice.

• Abbreviation

E51 : Chilean and Peruvian models
AUS : Australian model
MY : Malaysia model
SP

: Singapore model

TH

: Thai model

MX : Mexican model
AR

: Argentina model

3

0

0

Part No.

MY, SP

2-897-800-0s

AUS

2-897-800-1s

E51

2-897-800-2s

AR

2-897-800-3s

MX

2-897-800-4s

TH

3-208-699-0s

• Abbreviation

MY : Malaysia model
SP

: Singapore model

AUS : Australian model
E51 : Chilean and Peruvian models
AR : Argentina model
MX : Mexican model
TH : Thai model

4

Description and location of parts ............................................. 5

2-1.   Case ..................................................................................... 8
2-2.   Back Panel Section .............................................................. 9
2-3.   Front Panel Section ............................................................. 9
2-4.   DIGITAL Board ................................................................ 10
2-5.   MAIN Board Section ........................................................ 10
2-6.   STANDBY Board ............................................................. 11

..................................................................... 12

....................................................... 13

5-1.   Block Diagram – Tuner/Audio Section – .......................... 15
5-2.   Block Diagram – Digital Section – ................................... 16
5-3.   Block Diagram – Video Section – ..................................... 17
5-4.   Block Diagram – HDMI SW Section – ............................. 18
5-5.   Block Diagram – Key/Display Section – .......................... 19
5-6.   Block Diagram – Power Section – .................................... 20
5-7.   Printed Wiring Boards – Main Section – .......................... 22
5-8.   Schematic Diagram – Main Section (1/2) – ...................... 23
5-9.   Schematic Diagram – Main Section (2/2) – ...................... 24
5-10. Printed Wiring Board – Digital Section (1/2) – ................ 25
5-11. Printed Wiring Board – Digital Section (2/2) – ................ 26
5-12. Schematic Diagram – Digital Section (1/4) – ................... 27
5-13. Schematic Diagram – Digital Section (2/4) – ................... 28
5-14. Schematic Diagram – Digital Section (3/4) – ................... 29
5-15. Schematic Diagram – Digital Section (4/4) – ................... 30
5-16. Printed Wiring Boards – Video Section – ......................... 31
5-17. Schematic Diagram – Video Section – .............................. 32
5-18. Printed Wiring Board – HDMI SW Section – ................... 33
5-19. Schematic Diagram – HDMI SW Section – ..................... 34
5-20. Printed Wiring Boards – DCAC, Power Key Section – .... 35
5-21. Schematic Diagram – DCAC, Power Key Section – ........ 35
5-22. Printed Wiring Board – Display Section – ........................ 36
5-23. Schematic Diagram – Display Section – ........................... 37
5-24. Printed Wiring Board – Power Section – .......................... 38
5-25. Schematic Diagram – Power Section – ............................. 39
5-26. Printed Wiring Board

– DCDC Section (AUS, MY, SP, TH model) – ................. 40

5-27. Schematic Diagram

– DCDC Section (AUS, MY, SP, TH model) – ................. 40

6-1.   Case Section ...................................................................... 49
6-2.   Front Panel Section ........................................................... 50
6-3.   Back Panel Section ............................................................ 51
6-4.   Chassis Section ................................................................. 52

........................................ 53