Sony HT-DDW1500 / STR-K1500 Service Manual ▷ View online
9
STR-K1500
Name
Function
A
AV
?
/
1
Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
audio/video components that
the remote is programmed to
operate.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
B ?
/
1
Press to turn the receiver on or
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
SLEEP
Press ALT (H) and then press
SLEEP to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
SLEEP to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
C
Input buttons
Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components following the
steps in “Programming the
remote”.
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components following the
steps in “Programming the
remote”.
* The AUX button is not available
for receiver operation.
Button
Assigned Sony
component
component
VIDEO1
VCR (VTR mode 3)
VIDEO2
VCR (VTR mode 1)
VIDEO3
VCR (VTR mode 2)
DVD
DVD player
MD/TAPE
MD deck
SA-CD/CD Super Audio CD/CD
player
TUNER
Built-in tuner
AUX*
Not assigned
D
MULTI CH
Press to select the audio
directly from the components
connected to the MULTI CH
IN jacks.
directly from the components
connected to the MULTI CH
IN jacks.
E
MUSIC
Press to select sound fields
(MUSIC).
(MUSIC).
F
FM MODE
Press to select FM monaural
or stereo reception.
or stereo reception.
G
PRESET/
CH/D.SKIP
+/–
Press to
– select preset stations.
– select preset channels of the
– select preset stations.
– select preset channels of the
TV, VCR, satellite tuner,
Blu-ray disc recorder, or
hard disc recorder.
Blu-ray disc recorder, or
hard disc recorder.
– skip disc of the CD player,
VCD player, DVD player,
MD deck, or LD player
(multi-disc changer only).
MD deck, or LD player
(multi-disc changer only).
H
ALT
Press to light up the button. It
changes the remote key
function to activate the
buttons with orange printing.
changes the remote key
function to activate the
buttons with orange printing.
I
-/--
Press to select the channel
entry mode, either one or two
digit of the TV, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
entry mode, either one or two
digit of the TV, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
DISC
Press to select a disc directly
of the CD player or VCD
player (multi-disc change
only).
of the CD player or VCD
player (multi-disc change
only).
SEARCH
MODE
MODE
Press to select the searching
mode or unit for search (track,
index, etc.) of the DVD
player.
mode or unit for search (track,
index, etc.) of the DVD
player.
J x
Press to stop playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
K
MUTING
Press to mute the sound.
L
MASTER
VOL +
a)
/–
Press to adjust the volume
level of all speakers at the
same time.
level of all speakers at the
same time.
M
TV/VIDEO
Press to select the input signal
(TV input or video input).
(TV input or video input).
Name
Function
10
STR-K1500
N
AMP MENU
Press to display the menu of
the receiver. Then, use the
control buttons to perform
menu operations.
the receiver. Then, use the
control buttons to perform
menu operations.
O
AUTO CAL
Press to activate the Auto
Calibration function.
Calibration function.
P
WIDE
Press ALT (H) and then press
WIDE to select the wide
picture mode.
WIDE to select the wide
picture mode.
Q
TV CH +
a)
/–
Press to select preset TV
channels.
channels.
R
TV VOL
+
a)
/–
Press to adjust the TV volume
level.
level.
S
RETURN/
EXIT
O
Press to
– return to the previous menu.
– exit the menu while the
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner is
displayed on the TV screen.
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner is
displayed on the TV screen.
T
DISPLAY
Press to select information
displayed on the TV screen of
the TV, VCR, VCD player,
LD player, DVD player, CD
player, MD deck, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
displayed on the TV screen of
the TV, VCR, VCD player,
LD player, DVD player, CD
player, MD deck, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
U
Control
buttons
buttons
After pressing AMP MENU
(N), TOP MENU/GUIDE
(V), or AV MENU (W),
press the control button V, v,
B or b to select the settings.
When you press TOP MENU/
GUIDE or AV MENU, press
the control button to enter the
selection.
(N), TOP MENU/GUIDE
(V), or AV MENU (W),
press the control button V, v,
B or b to select the settings.
When you press TOP MENU/
GUIDE or AV MENU, press
the control button to enter the
selection.
V
TOP MENU/
GUIDE
GUIDE
Press to display
– DVD title.
– menu or on-screen guide of
– DVD title.
– menu or on-screen guide of
the satellite tuner, Blu-ray
disc recorder, hard disc
recorder, or PSX on the TV
screen.
disc recorder, hard disc
recorder, or PSX on the TV
screen.
Then, use the control buttons
to perform menu operations.
to perform menu operations.
Name
Function
W
AV MENU
Press to display the menus of
the VCR, DVD player,
satellite tuner, Blu-ray disc
recorder, hard disc recorder,
or PSX on the TV screen.
Then, use the control buttons
to perform menu operations.
the VCR, DVD player,
satellite tuner, Blu-ray disc
recorder, hard disc recorder,
or PSX on the TV screen.
Then, use the control buttons
to perform menu operations.
X H
a)
Press to start playback of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
Y X
Press to pause playback or
recording of the VCR, CD
player, VCD player, LD
player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX. (Also
starts recording with
components in recording
standby.)
recording of the VCR, CD
player, VCD player, LD
player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX. (Also
starts recording with
components in recording
standby.)
Z m
/
M
Press to
– search tracks in the forward/
– search tracks in the forward/
backward direction of the
CD player, VCD player, LD
player, DVD player, MD
deck, Blu-ray disc recorder,
hard disc recorder, or PSX.
CD player, VCD player, LD
player, DVD player, MD
deck, Blu-ray disc recorder,
hard disc recorder, or PSX.
– fastforward/rewind of the
VCR, DAT deck, or tape
deck.
deck.
D. TUNING
Press to enter direct tuning
mode.
mode.
ANT
Press ALT (H) and then press
ANT to select the signal
output from the antenna
terminal of the VCR or
satellite tuner (TV signal or
video signal).
ANT to select the signal
output from the antenna
terminal of the VCR or
satellite tuner (TV signal or
video signal).
CLEAR
Press ALT (H) and then press
CLEAR to
– clear a mistake when you
CLEAR to
– clear a mistake when you
press the incorrect numeric
button.
button.
– return to continuous
playback, etc. of the CD
player, DVD player, Blu-ray
disc recorder, PSX, or
satellite tuner.
player, DVD player, Blu-ray
disc recorder, PSX, or
satellite tuner.
Name
Function
11
STR-K1500
a)
The MASTER VOL +, TV VOL +, TV CH +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
Notes
The AUX and 12 buttons on the remote are not
available for receiver operation.
Some functions explained in this section may not
work depending on the model.
The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
wj
TUNING +/–
Press to scan a station.
.
/
>
Press to skip tracks of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
2CH
Press to select 2CH STEREO
mode.
mode.
A.F.D.
Press to select A.F.D. mode.
MOVIE
Press to select sound fields
(MOVIE).
(MOVIE).
DUAL MONO
Press to select the language
you want during digital
broadcast.
you want during digital
broadcast.
AUDIO
Press to change the sound to
Multiplex, Bilingual or Multi
channel TV sound of the TV,
VCR, DVD player, satellite
tuner, Blu-ray disc recorder,
hard disc recorder, or PSX.
Multiplex, Bilingual or Multi
channel TV sound of the TV,
VCR, DVD player, satellite
tuner, Blu-ray disc recorder,
hard disc recorder, or PSX.
ANGLE
Press to select the viewing
angle or change the angles of
the DVD player or Blu-ray
disc recorder.
angle or change the angles of
the DVD player or Blu-ray
disc recorder.
JUMP/TIME
Press to
– toggle between the previous
– toggle between the previous
and the current channels of
the satellite tuner, TV, or
Blu-ray disc recorder.
the satellite tuner, TV, or
Blu-ray disc recorder.
– show the time or display the
playing time of a disc, etc. of
the CD player, MD deck,
VCD player, or DVD player.
the CD player, MD deck,
VCD player, or DVD player.
MEMORY
Press to store a station.
SUBTITLE
Press ALT (H) and then press
SUBTITLE to change the
subtitles of the DVD player.
SUBTITLE to change the
subtitles of the DVD player.
ENTER
Press ALT (H) and then press
ENTER to enter the value
after selecting a channel, disc
or track using the numeric
buttons.
ENTER to enter the value
after selecting a channel, disc
or track using the numeric
buttons.
Name
Function
Name
Function
wj
Numeric
buttons
buttons
Press ALT (H) and then press
the numeric buttons to
– preset/tune to preset
the numeric buttons to
– preset/tune to preset
stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the TV, VCR, satellite tuner,
Blu-ray disc recorder, hard
disc recorder, or PSX.
Blu-ray disc recorder, hard
disc recorder, or PSX.
>10/11
Press ALT (H) and then press
>10/11 to select track
numbers over 10 of the VCR,
CD player, VCD player, LD
player, MD deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, satellite tuner,
TV, or PSX.
>10/11 to select track
numbers over 10 of the VCR,
CD player, VCD player, LD
player, MD deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, satellite tuner,
TV, or PSX.
wk
TV
?
/
1
Press to turn the TV on or off.
wl
RM SET UP
Press to set up the remote.
12
STR-K1500
FACTORY PRESET MODE
All preset contents are reset to the default setting.
Procedure:
Procedure:
1. While depressing the SPEAKERS (ON/OFF) and the
MOVIE buttons simultaneously, press the power ?/1 button
to turn on the main power.
to turn on the main power.
2. The message “FACTORY” appears and the present contents
are reset to the default values. (5 second)
AM CHANNEL STEP 9 kHz/10 kHz
SELECTION MODE
SELECTION MODE
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
channel step.
Procedure:
1. Set the FUNCTION to AM. Turn off the main power.
2. While depressing the TUNING MODE button, press the
2. While depressing the TUNING MODE button, press the
power ?/1 button to turn on the main power.
3. Either the message “9 k STEP” or “10 kSTEP” appears. Select
the desired step.
FLUORESCENT INDICATOR TUBE TEST MODE
All fluorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While depressing the TUNING MODE and the DISPLAY
buttons simultaneously, press the power ?/1 button to turn
on the main power.
on the main power.
2. All segments turn on.
3. Turn the INPUT SELECTOR dial.
4. Turn the INPUT SELECTOR dial once again.
5. Turn the INPUT SELECTOR dial once again. All segments
turn off.
6. Every turning of the INPUT SELECTOR dial turns on each
segment one after another in the same order.
SOUND FIELD CLEAR MODE
The preset sound field is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While depressing the 2CH button, press the power ?/1
button to turn on the main power.
2. The message “SF. CLR.” appears and initialization is
performed. (5 second)
SOFTWARE VERSION DISPLAY MODE
The software version is displayed.
Procedure:
Procedure:
1. While depressing the SPEAKERS (ON/OFF) and the
DISPLAY buttons simultaneously, press the power ?/1
button to turn on the main power.
button to turn on the main power.
2. The model name, destination and the software version are
displayed. (7 second)
KEY CHECK MODE
Button check
Procedure:
Procedure:
1. While depressing the SPEAKERS (ON/OFF) and the 2CH
buttons simultaneously, press the power ?/1 button to turn
on the main power.
“REST 13” appears.
on the main power.
“REST 13” appears.
2. Every pressing of any button other than ?/1 counts down
the buttons. The buttons which are already counted once are
not counted again.
not counted again.
3. When all buttons are pressed “REST 00” appears.
CHANGE COMMON MODE
This mode is command mode changed to AV 1 or AV2.
Procedure:
Procedure:
1. While depressing the INPUT MODE button, press the power
?/1
button to turn on the main power.
2. Either the message “C.MODE.AV 1” or “C.MODE.AV 2”
appears. (3 second)
SHIPMENT MODE
All preset contents are reset to the default setting.
Procedure:
Procedure:
1. While depressing the SPEAKERS (ON/OFF) and the
MUSIC buttons simultaneously, press the power ?/1 but-
ton to turn on the main power.
ton to turn on the main power.
2. “CLEARED” appears and switch off the set.
PROTECTOR
Procedure:
1. While depressing the TUNING MODE and the A.F.D. but-
tons simultaneously, press the power ?/1 button to turn on
the main power.
the main power.
2. “ PROT. EVER” appears. (3 second)
DECODE AUTO ALL
Procedure:
1. While depressing the TUNING MODE and the MOVIE
buttons simultaneously, press the power ?/1 button to turn
on the main power.
on the main power.
2. “DEC. TEST” appears. (10 second)
L
SW
C
R
SL
S
SR
SBL SB SBR
LFE
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
dB
kHz
mft.
MHz
MEMORY
DIRECT
L
SW
R
S
SB
LFE
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
dB
kHz
mft.
MHz
MEMORY
DIRECT
C
SL
SR
SBL
SBR
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
kHz
mft.
MHz
MEMORY
DIRECT
SECTION 2
TEST MODE
Click on the first or last page to see other HT-DDW1500 / STR-K1500 service manuals if exist.