Sony HT-DDW1000 / STR-K1000P Service Manual ▷ View online
9
STR-K1000P
Notes
• The AUX and 12 buttons on the remote are not
available for receiver operation.
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
component the above operation may not be possible
or may operate differently than described.
• When you press input buttons (VIDEO1, VIDEO2,
VIDEO3 or DVD), the input mode of the TV might
not switch to the corresponding input mode that you
want. In this case, press TV/VIDEO button to switch
the input mode of the TV.
not switch to the corresponding input mode that you
want. In this case, press TV/VIDEO button to switch
the input mode of the TV.
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
Set the remote command mode using the
RM SET UP button and the remote command
mode buttons.
RM SET UP button and the remote command
mode buttons.
Selecting the command mode
You can switch the command mode (AV1 and
AV2) of the remote. If the command mode of the
receiver and the remote is different, you cannot
use the remote to operate the receiver. To
change the command mode of the receiver, see
page 51.
AV2) of the remote. If the command mode of the
receiver and the remote is different, you cannot
use the remote to operate the receiver. To
change the command mode of the receiver, see
page 51.
Press AV1 (or AV2) while holding down
RM SET UP.
RM SET UP.
The indicator flashes once (twice for AV2) ,
then the command mode switches.
then the command mode switches.
To check the command mode of
the remote
the remote
Press RM SET UP. You can check the remote by
the indicator.
the indicator.
To reset the remote to factory
settings
settings
Press
?/1
, AV
?/1
and MASTER VOL – at
the same time.
The indicator flashes 3 times, then goes off.
Remote
Button
Button
Operations
Function
O qa
VCD player/
LD player/
DVD player/
Blu-ray disc
recorder/
Hard disc
recorder/PSX/
Satellite tuner
LD player/
DVD player/
Blu-ray disc
recorder/
Hard disc
recorder/PSX/
Satellite tuner
Returns to the
previous menu or
exits the menu.
previous menu or
exits the menu.
V/v qa
Receiver
Selects a menu item.
B/b qa
Receiver
Adjusts or changes
the setting.
the setting.
V/v/B/b qa VCR/
DVD player/
Blu-ray disc
recorder/
Hard disc
recorder/PSX/
Satellite tuner
Blu-ray disc
recorder/
Hard disc
recorder/PSX/
Satellite tuner
Selects a menu item.
Selecting the command
mode of the remote
mode of the remote
Mode
Indicator flashes
AV1
once
AV2
twice
10
STR-K1000P
FACTORY PRESET MODE
•
All preset contents are reset to the default setting.
•
Procedure:
While depressing the FM MODE and the DISPLAY buttons
simultaneously, press the power ?/1 button to turn on the
main power.
The message “FACTORY” appears and the present contents
are reset to the default values.
While depressing the FM MODE and the DISPLAY buttons
simultaneously, press the power ?/1 button to turn on the
main power.
The message “FACTORY” appears and the present contents
are reset to the default values.
AM CHANNEL STEP 9 kHz/10 kHz
SELECTION MODE
SELECTION MODE
•
Either the 9 kHz step or 10 kHz step can be selected for the
AM channel step.
AM channel step.
•
Procedure:
Set the FUNCTION to AM. Turn off the main power.
While depressing the TUNING+ button or the PRESET
TUNING+ button, press the power ?/1 button to turn on
the main power. Either the message “9 k STEP” or “10 k
STEP” appears. Select the desired step.
This mode is only for Australian and E models.
Set the FUNCTION to AM. Turn off the main power.
While depressing the TUNING+ button or the PRESET
TUNING+ button, press the power ?/1 button to turn on
the main power. Either the message “9 k STEP” or “10 k
STEP” appears. Select the desired step.
This mode is only for Australian and E models.
FLUORESCENT INDICATOR TUBE TEST MODE
•
All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns
on one after another.
all segments turn on at the same time, then each segment turns
on one after another.
•
Procedure:
While depressing the TUNING– and the SPEAKERS (OFF/
A/B/A+B) buttons simultaneously, press the power ?/1
button to turn on the main power.
While depressing the TUNING– and the SPEAKERS (OFF/
A/B/A+B) buttons simultaneously, press the power ?/1
button to turn on the main power.
1. All segments turn on.
2. Press the VIDEO 1 button, confirm display.
3. Press the VIDEO 1 button, confirm display
4. Press the VIDEO 1 button, All segments turn off.
5. Every pressing of the VIDEO 1 button turns on each
segment one after another in the same order.
(Not only the VIDEO 1 button, but also the other buttons
such as VIDEO 2 , VIDEO 3 , DVD , MD/TAPE , SA-CD/
CD , FM and AM can be used.)
(Not only the VIDEO 1 button, but also the other buttons
such as VIDEO 2 , VIDEO 3 , DVD , MD/TAPE , SA-CD/
CD , FM and AM can be used.)
SOUND FIELD CLEAR MODE
•
The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
Use this mode before returning the product to clients upon
completion of repair.
•
Procedure:
While depressing the 2CH button, press the power ?/1
button to turn on the main power.
The message “SF. CLR.” appears and initialization is
performed.
While depressing the 2CH button, press the power ?/1
button to turn on the main power.
The message “SF. CLR.” appears and initialization is
performed.
SOFTWARE VERSION DISPLAY MODE
•
The software version is displayed.
•
Procedure:
While depressing the TUNING– and the DISPLAY buttons
simultaneously, press the power ?/1 button to turn on the
main power. The model name, destination and the software
version are displayed.
While depressing the TUNING– and the DISPLAY buttons
simultaneously, press the power ?/1 button to turn on the
main power. The model name, destination and the software
version are displayed.
KEY CHECK MODE
•
Button check
•
Procedure:
While depressing the TUNING– and the MAIN MENU
buttons simultaneously, press the power ?/1 button to turn
on the main power.
“REST 30” appears.
Every pressing of any button other than ?/1 counts down
the buttons. The buttons which are already counted once are
not counted again. When all buttons are pressed “REST 00”
appears.
While depressing the TUNING– and the MAIN MENU
buttons simultaneously, press the power ?/1 button to turn
on the main power.
“REST 30” appears.
Every pressing of any button other than ?/1 counts down
the buttons. The buttons which are already counted once are
not counted again. When all buttons are pressed “REST 00”
appears.
AUTO BETICAL MODE
•
This mode is installed in the Europe models only. When this
mode is used, the receiver scans the broadcasts that can be
received by the tuner, and sets up the broadcasts. Be sure to
start scanning after connecting the antenna.
mode is used, the receiver scans the broadcasts that can be
received by the tuner, and sets up the broadcasts. Be sure to
start scanning after connecting the antenna.
•
Procedure:
1. Check that the antenna is connected.
2. Press the ?/1 button to turn on the power while pressing the
2. Press the ?/1 button to turn on the power while pressing the
MEMORY button.
CHANGE COMMON MODE
•
This mode is command mode changed to AV 1 or AV2.
•
Procedure:
While depressing the ENTER button, press the power ?/1
button to turn on the main power.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2”
appears.
While depressing the ENTER button, press the power ?/1
button to turn on the main power.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2”
appears.
SHIPMENT MODE
•
All preset contents are reset to the default setting.
•
Procedure:
While depressing the SPEAKERS (OFF/A/B/A+B) and the
FM buttons simultaneously, press the power ?/1 button to
turn on the main power.
“CLEARED” appears and switch off the set.
While depressing the SPEAKERS (OFF/A/B/A+B) and the
FM buttons simultaneously, press the power ?/1 button to
turn on the main power.
“CLEARED” appears and switch off the set.
L
SW
C
R
SL
S
SR
SBL SB SBR
LFE
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
dB
kHz
mft.
MHz
MEMORY
DIRECT
L
SW
R
S
SB
LFE
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
dB
kHz
mft.
MHz
MEMORY
DIRECT
C
SL
SR
SBL
SBR
SP A
SP B SLEEP OPT COAX MULTI CH IN 96/24
SP B SLEEP OPT COAX MULTI CH IN 96/24
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D.RANGE EQ STEREO MONO
D D
D D
kHz
mft.
MHz
MEMORY
DIRECT
SECTION 2
TEST MODE
11
11
STR-K1000P
STR-K1000P
• Waveforms
– DIGITAL Board –
For Schematic Diagrams.
Note:
• All capacitors are in
Note:
• All capacitors are in
µ
F unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics and
tantalums.
tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
• %
: indicates tolerance.
•
f
: internal component.
•
2
: nonflammable resistor.
•
5
: fusible resistor.
•
C
: panel designation.
•
A
: B+ Line.
•
B
: B+ Line.
• Voltages and waveforms are dc with respect to ground un-
der no-signal (detuned) conditions.
No mark : FM
No mark : FM
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal production
tolerances.
tolerances.
• Waveforms are taken with a oscilloscope.
• Circled numbers refer to waveforms.
• Circled numbers refer to waveforms.
• Signal path.
F
: FM
J
: ANALOG
c
: DIGITAL
I
: VIDEO
• Abbreviation
AUS
: Australian model
E51
: Chilean and Peruvian models
MX
: Mexican model
SP
: Singapore model
SP6
: Singapore and Malaysia models
For Printed Wiring Boards.
Note:
•
Note:
•
X
: parts extracted from the component side.
•
a
: Through hole.
•
f
: internal component.
•
: Pattern from the side which enables seeing.
• Indication of transistor.
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
(In addition to this, the necessary note is printed in each block.)
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(Side A)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Side B)
the parts face are indicated.
1
IC1501
9
(MCLK1)
1 V/DIV, 40 ns/DIV
72 ns
3.4 Vp-p
2
IC1101
id
(X1)
1 V/DIV, 20 ns/DIV
41.6
µ
s
4.2 Vp-p
3
IC1301
ws
(XIN)
1 V/DIV, 40 ns/DIV
81 ns
4.4 Vp-p
C
B
These are omitted.
E
Q
B
These are omitted.
C
E
SECTION 3
DIAGRAMS
• Circuit Boards Location
DIGITAL board
VIDEO board
VIDEO3 board
SPEAKER C/SB board
SPEAKER B (P) board
MAIN board
DISPLAY board
HEADPHONE board
POWER board
AC SELECT board
(E51 model only)
(E51 model only)
TUNING board
STANDBY board
Note: The components identified by mark
0
or dotted
line with mark
0
are critical for safety.
Replace only with part number specified.
Ver. 1.1
12
12
STR-K1000P
STR-K1000P
3-1. BLOCK DIAGRAM – MAIN SECTION –
• Signal Path
: FM
: ANALOG
: DIGITAL
: VIDEO
• R-CH is omitted due to same as L-CH.
AUDIO IN
AUDIO IN
PROCESSOR
INCL
26
88
OUT L
INBL
24
INGL
34
85
OUT SL
86
OUTC
81
OUT SW
DATA
60
CLK
59
27
VOL_CLK
SDA
SCL
28
VOL DATA LATCH
SYSTEM CONTROL
IC1101(2/3)
IC203
VIDEO AMP
IC807
+5V REG
DVD
IN
VIDEO 2
IN
J1301
3
5
6
2
J298
IC1303
DIGITAL AUDIO
I/F RECEIVER
IC1301
L
DISPLAY
/POWER
SECTION
/POWER
SECTION
DIN2
5
DO
35
DI
36
CLK
38
CE
37
ERROR
34
XSTATE
17
XMODE
48
13
CK OUT
20
XMCK
14
BCK
15
LRCK
16
DATAO
IC1303
X1301
12.288MHz
AUDIO DSP
IC1503
SELECTOR
IC1501
KFSI0
SYSCLK
LRCK
BCK
DOUT
22
16
13
14
15
SDI2
60
LRCK0
19
HCLK
34
HCS
36
HACN
32
PM
113
BST
56
XRST
2
23
SDO1
24
SDO2
25
SDO3
BCKI2
29
LRCKI2
28
BCKII
17
LRCKII
15
IC1502
SRAM
AUDIO CODEC
IC1452
IC1403
AD CONVERTER
IC1401
MCLKI
38
RST
37
ML
36
MC
35
MDI
34
MDO
33
10
VOUT5
BCK
40
LRCK
41
DATA3
47
DATA1
45
26
SDO4
DATA4
31
DATA2
46
14
VOUT1
12
VOUT3
11
VOUT4
ANALOG SOUND
44
BOUTAL
SL
AOUTL
41
INCL
49
52
51
56
SL
C
83
OUTSBL
SBL
INCSL
INCC
INCSW
A
98 97 95 96 99 100
94
1
6
13
89
DO
DI
CLK
CE
ERROR
XSTATE
CKSEL1
DATA0
92
BST SEL
SW4
V1
SW4
20
HCLK
4
HCS
5
HACN
7
PM
3
BST
6
XRST
10
RST(680)
9
RST(800)
12
MC
13
MC
14
MDI
15
MDO
5
6
29
30
RELAY
DRIVE
DRIVE
Q560
J404 (1/2)
VIDEO 1
IN
J402
SA-CD/CD
VIDEO 2
AUDIO IN
VIDEO 3
MD/TAPE
DVD
OPTICAL
IN
IC1351
DIN0
3
SA-CD/
CD IN
OPTICAL
IN
IC1354
DINI
4
22
21
XIN
XOUT
93
XMODE
CKSEL1
47
GP9
68
HD OUT
35
HD IN
33
2
GP9
18
HD OUT
19
HD IN
9
MCLK1
12
MCLK2
X1502
13.9MHz
14
SCK OUT
1
LIN
6
RST
20
BCKO
19
LRCKO
18
SDI1
24
6
1
5
2
AUDIO
GP8
69
EXLOCK
59
INIR
38
TN1
TUNER PACK
FM
75
Ω
COAXIAL
AM
R-CH
ST-DI
ST-DO
CLK
CE
STEREO
TUNED
MUTING
FM
AM
R CH
L CH
TUNER +10V
10V
SYSTEM CONTROL.
IC1101(1/3)
DO
73
SLATCH
74
TUNER-DATA
17
T.SERIAL CLK
16
STEREO
76
TUNED
75
MUTE
78
COAXIAL
OPTICAL
DIGITAL
D1101
IC401
SDA
SCL
EEPROM
IC1131
IC402
WOOFER AMP
SW RY
70
IN
INFL
32
INDL
28
INEL
30
J403 (1/2)
VIDEO 1
J404
(2/2)
(2/2)
AUDIO OUT
46
ROUTBL
MD/TAPE
J402
(2/2)
(2/2)
OUT
RY560
AUDIO OUT
J309
SUB WOOFER
5
7
14
86
SW1
SW1
88
SW3
4
SW3
10
87
SW2
SW2
VIDEO IN
J201
(1/2)
(1/2)
J200
(1/2)
(1/2)
VIDEO 1
VIDEO IN
VIDEO 2
VIDEO IN
DVD
5 V2
3
DVD
1
M.OUT
MONITOR
+ V
J201
(2/2)
(2/2)
VIDEO OUT
15
V.OUT
16
VCC
VIDEO 1
J200
(2/2)
(2/2)
VIDEO OUT
IC804
-5V REG
- V
14
VEE
S
B
A
Y
3
1
IC1405
5
7
IC1404
3
1
IC1404
5
7
16
VOUT7
54 INCSB
IC1406
5
7
J401
SUB WOOFER
CENTER
FRONT
SURROUND
MULTI
CH
IN
INDL
12
INDL
17
INDL
13
INDL
10
J301
(1/2)
(1/2)
Y
P
R/
C
R
/R-Y
P
B/
C
B
/B-Y
Y
DVD
VIDEO 2
COMPONENT
VIDEO
VIDEO
P
R/
C
R
/R-Y
P
B/
C
B
/B-Y
CH1 IN2
3
CH2 IN2
9
CH3 IN2
14
CH1 IN3
5
CH2 IN3
11
CH3 IN3
12
SW1
71
2
SW2
65
4
COMPO SW1
COMPO SW2
CH1 OUT 22
CH2 OUT 20
CH3 OUT
18
Y
P
R/
C
R
/R-Y
P
B/
C
B
/B-Y
MONITOR
OUT
CONPONENT
VIDEO
J301
(2/2)
(2/2)
VIDEO AMP
IC304
Click on the first or last page to see other HT-DDW1000 / STR-K1000P service manuals if exist.