Sony HT-CT380 / HT-CT381 / SA-CT380 / SA-CT381 Service Manual ▷ View online
HT-CT380/CT381
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2015.02
New
1.1
2015.04
Addition of PX, African, Iranian, Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan, Tanzanian, Nigerian and
Singapore models (HT-CT380/SA-CT380)
Change of Part No. for INSTRUCTION MANUAL (US, Canadian, AEP, UK and Australian models)
(SMR-14050)
1.2
2015.05
Addition of Russian, Latin American, Argentina and Thai models (HT-CT380/SA-CT380)
Change of Part No. for INSTRUCTION MANUAL (Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan,
Tanzanian and Nigerian models)
(SMR-15004)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
HT-CT380/CT381
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2015.02
New
1.1
2015.04
Addition of PX, African, Iranian, Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan, Tanzanian, Nigerian and
Singapore models (HT-CT380/SA-CT380)
Change of Part No. for INSTRUCTION MANUAL (US, Canadian, AEP, UK and Australian models)
(SMR-14050)
1.2
2015.05
Addition of Russian, Latin American, Argentina and Thai models (HT-CT380/SA-CT380)
Change of Part No. for INSTRUCTION MANUAL (Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan,
Tanzanian and Nigerian models)
(SMR-15004)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
HT-CT380/CT381
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2015.02
New
1.1
2015.04
Addition of PX, African, Iranian, Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan, Tanzanian, Nigerian and
Singapore models (HT-CT380/SA-CT380)
Change of Part No. for INSTRUCTION MANUAL (US, Canadian, AEP, UK and Australian models)
(SMR-14050)
1.2
2015.05
Addition of Russian, Latin American, Argentina and Thai models (HT-CT380/SA-CT380)
Change of Part No. for INSTRUCTION MANUAL (Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan,
Tanzanian and Nigerian models)
(SMR-15004)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
HT-CT380/CT381
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2015.02
New
1.1
2015.04
Addition of PX, African, Iranian, Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan, Tanzanian, Nigerian and
Singapore models (HT-CT380/SA-CT380)
Change of Part No. for INSTRUCTION MANUAL (US, Canadian, AEP, UK and Australian models)
(SMR-14050)
1.2
2015.05
Addition of Russian, Latin American, Argentina and Thai models (HT-CT380/SA-CT380)
Change of Part No. for INSTRUCTION MANUAL (Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan,
Tanzanian and Nigerian models)
(SMR-15004)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.