Sony HT-7000DH / STR-K7000 Service Manual ▷ View online
8
STR-K7000
2-2. FRONT PANEL SECTION
2-3. BACK PANEL SECTION
7
five screws
(+BVTP 3
×
8)
6
two screws
(+BVTP 3
×
8)
1
CNP2000 (4P)
2
CNP791 (4P)
8
front panel section
3
CNS505 (23 core)
4
CNP202 (3P)
5
CNP503 (3P)
0
screw
(+BVTP 3
×
8)
qa
two screws
(+BVTP 3
×
8)
qs
two screws
(+BVTP 3
×
8)
qd
five screws
(+BVTP 3
×
8)
qf
three screws
(+BVTP 3
×
8)
qg
four screws
(+BVTP 3
×
8)
qh
back panel section
1
CNP901 (2P)
7
CNP503 (4P)
8
CN103 (2P)
9
CNP203 (3P)
3
CNS509 (17 core)
5
CNS503 (9 core)
6
CN504 (5 core)
4
CNS508 (11 core)
2
CNP806 (3P)
9
STR-K7000
2-4. DIGITAL BOARD
2-5. MAIN BOARD SECTION
4
screw
(+BVTP 3
×
8)
5
DIGITAL board
1
CNP505 (10P)
2
CNP503 (5P)
3
CNP504 (7P)
6
two screws
(+BV3 (3
-CR))
9
MAIN board section
7
two screws
(+BV3 (3
-CR))
8
screw
(+BV3 (3
-CR))
1
CNP600 (5P)
5
CNP801 (3P)
4
CNP802 (5P)
2
CNP601 (4P)
3
CNP801 (5P)
10
STR-K7000
2-6. STANDBY BOARD
3
screw
(+BVTP 3
×
8)
4
STANDBY board
1
CNP902 (2P)
2
CNP804 (3P)
11
STR-K7000
SECTION 3
TEST MODE
FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
* Procedure:
While depressing the [SPEAKERS $OFF/A/B/A+B%] and the
[MOVIE] buttons simultaneously, press the
[MOVIE] buttons simultaneously, press the
?/1
button to turn
on the main power.
The message “FACTORY” appears for a moment and the present
contents are reset to the default values.
The message “FACTORY” appears for a moment and the present
contents are reset to the default values.
AM CHANNEL STEP 9 kHz/10 kHz SELECTION
MODE
MODE
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Turn the [INPUT SELECTOR] control to set AM and press the
?/1
button to turn off the main power.
While depressing the [TUNING MODE] button, press the
?/1
button to turn on the main power.
Either the message “9k STEP” or “10k STEP” appears for a
moment and select the desired step.
Either the message “9k STEP” or “10k STEP” appears for a
moment and select the desired step.
VACUUM FLUORESCENT DISPLAY TEST MODE
* All fluorescent segments are tested.
When this test is activated, all segments light on at the same
time, then each segment lights on one after another.
time, then each segment lights on one after another.
* Procedure:
While depressing the [TUNING MODE] and the [DISPLAY] but-
tons simultaneously, press the
tons simultaneously, press the
?/1
button to turn on the main
power.
1. ALL segments light on.
[MULTI CHANNEL DECODING] LED light on.
2. Turn the [INPUT SELECTOR] control, confirm display.
3. Turn the [INPUT SELECTOR] control, confirm display.
[MULTI CHANNEL DECODING] LED light on.
4. Turn the [INPUT SELECTOR] control, all segments and all LEDs
light off.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
completion of repair.
* Procedure:
While depressing the [2CH] button, press the
?/1
button to turn
on the main power.
The message “S.F. CLR.” appears for a moment and initializa-
tion is performed.
The message “S.F. CLR.” appears for a moment and initializa-
tion is performed.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
* Procedure:
While depressing the [SPEAKERS $OFF/A/B/A+B%] and the
[DISPLAY] buttons simultaneously, press the
[DISPLAY] buttons simultaneously, press the
?/1
button to turn
on the main power.
The model name, destination and the software version are dis-
played for a moment.
The model name, destination and the software version are dis-
played for a moment.
KEY CHECK MODE
* Button check
* Procedure:
* Procedure:
While depressing the [SPEAKERS $OFF/A/B/A+B%] and the [2CH]
buttons simultaneously, press the
buttons simultaneously, press the
?/1
button to turn on the main
power.
Either the message “REST 13” appears.
Every pressing of any button other than the
Either the message “REST 13” appears.
Every pressing of any button other than the
?/1
counts down
the buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
counted again. When all buttons are pressed “REST 00” appears.
COMMAND MODE SELECTION MODE
* The command mode (AV1 or AV2) of the remote commander
can be selected.
* Procedure:
While depressing the [INPUT MODE] button, press the
?/1
but-
ton to turn on the main power.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2” ap-
pears for a moment and select the desired mode.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2” ap-
pears for a moment and select the desired mode.
L
SW
LFE
C
R
SL
S
SR
SBL SB
SBR
SP A
SP B SLEEP OPT COAX HDMI 96/24
SP B SLEEP OPT COAX HDMI 96/24
DIGITAL EX
PRO LOGIC II x DTS-ES NEO:6 AAC CAT RDS
D.RANGE EQ STEREO MONO A.DIRECT
D D
D D
dB
k Hz
m ft.
MHz
MEMORY
L
SW
LFE
R
S
SB
A
SLEEP
COAX
96/24
EX
DTS
II
NEO:6
CAT
D.RANGE
STEREO
dB
Hz
ft.
MEMORY
C
SL
SR
SBL
SBR
SP
SP B
SP B
OPT
HDMI
DIGITAL
x
PRO LOGIC
-ES
AAC
RDS
EQ
MONO A.DIRECT
D D
D D
k
m
MHz
Click on the first or last page to see other HT-7000DH / STR-K7000 service manuals if exist.