Sony HT-6600DP / STR-K850P Service Manual ▷ View online
4
STR-K850P
TABLE OF CONTENTS
1. GENERAL
·········································································· 5
2. TEST MODE
······································································ 6
3. DIAGRAMS
3-1.
Circuit Board Location ················································· 7
3-2.
Block Diagrams – MAIN Section – ····························· 8
– DIGITAL/POWER Section – ···································· 9
– DIGITAL/POWER Section – ···································· 9
3-3.
Printed Wiring Board
– DIGITAL Board (SIDE A) – ··································· 10
– DIGITAL Board (SIDE A) – ··································· 10
3-4.
Printed Wiring Board
– DIGITAL Board (SIDE B) – ··································· 11
– DIGITAL Board (SIDE B) – ··································· 11
3-5.
Schematic Diagram – DIGITAL Section (1/2) – ······· 12
3-6.
Schematic Diagram – DIGITAL Section (2/2) – ······· 13
3-7.
Printed Wiring Board – MAIN Section – ··················· 14
3-8.
Schematic Diagram – MAIN Section (1/3) – ············· 15
3-9.
Schematic Diagram – MAIN Section (2/3) – ············· 16
3-10. Schematic Diagram – MAIN Section (3/3) – ············· 17
3-11. Printed Wiring Board – POWER Section – ··············· 18
3-12. Printed Wiring Board – FRONT Section – ················ 19
3-13. Schematic Diagram – FRONT Section – ··················· 20
3-14. Printed Wiring Board – VIDEO Section – ················· 21
3-15. Schematic Diagram – VIDEO Section – ··················· 22
3-16. IC Block Diagrams ····················································· 23
3-17. IC Pin Function Descriptions ····································· 25
3-11. Printed Wiring Board – POWER Section – ··············· 18
3-12. Printed Wiring Board – FRONT Section – ················ 19
3-13. Schematic Diagram – FRONT Section – ··················· 20
3-14. Printed Wiring Board – VIDEO Section – ················· 21
3-15. Schematic Diagram – VIDEO Section – ··················· 22
3-16. IC Block Diagrams ····················································· 23
3-17. IC Pin Function Descriptions ····································· 25
4. EXPLODED VIEWS
4-1. Front Panel Section ····················································· 27
4-2. Chassis Section ··························································· 28
4-2. Chassis Section ··························································· 28
5. ELECTRICAL PARTS LIST
······································· 29
MODEL IDENTIFICATION
— BACK PANEL —
Part No.
Model
US model
Canadian model
Canadian model
Parts No.
4-244-312-0
π
4-244-312-1
π
5
STR-K850P
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
?/1
g
qj qh qg qf
qk
ql
w;
wa
ws
wd
wj
wk
wl
wh
wf
wg
1 2 3
5
9 0
6
qa qs
qd
7
4
8
MD/TAPE 9 (22)
MEMORY wj (31)
MOVIE (button/indicator) ws (25,
MEMORY wj (31)
MOVIE (button/indicator) ws (25,
44)
MULTI CHANNEL DECODING
(indicator) ql (22)
MULTI CH IN w; (22)
MUSIC (button/indicator) wa (25,
MUSIC (button/indicator) wa (25,
26, 44)
P – Z
PHONES (jack) wl (23, 27, 44)
PRESET TUNING +/– wg (31, 32
PRESET TUNING +/– wg (31, 32
47)
SPEAKERS (OFF/A/B/A+B) 2
(14, 23, 44)
TUNER FM/AM qa (22, 31, 32,
33)
TUNING +/– wh (30, 31)
VIDEO 1 6 (22)
VIDEO 2 7 (22)
VIDEO 1 6 (22)
VIDEO 2 7 (22)
NUMBERS AND SYMBOLS
2CH (button/indicator) wf (24,
26, 29)
?/1 (power) 1 (16, 21, 29, 35,
47)
</> qk (17, 28, 29, 33, 35, 49)
ALPHABETICAL ORDER
A – H
A.F.D. (button/indicator) wd
(24–26)
CD/SACD q; (22)
DIMMER 4 (23)
DISPLAY 3 (23, 45)
Display qs (23)
DVD 8 (22)
ENTER qh (33, 35)
FM MODE wk (30)
DIMMER 4 (23)
DISPLAY 3 (23, 45)
Display qs (23)
DVD 8 (22)
ENTER qh (33, 35)
FM MODE wk (30)
I – O
INPUT MODE qf (22)
IR (receptor) 5 (36, 45)
Jog dial qj (17, 28, 29, 33, 35,
IR (receptor) 5 (36, 45)
Jog dial qj (17, 28, 29, 33, 35,
49)
MAIN MENU qg (17, 28, 29, 33,
35, 49)
MASTER VOLUME qd (20, 22,
44)
6
STR-K850P
SECTION 2
TEST MODE
FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
* Procedure:
While depressing the FM MODE and the PRESET TUNING
−
buttons simultaneously, press the ?/1 button again. The message
“FACTORY” appears and the present contents are reset to the
default values.
“FACTORY” appears and the present contents are reset to the
default values.
AM CHANNEL STEP 9 KHZ/10 KHZ
SELECTION MODE
SELECTION MODE
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Set the FUNCTION to AM. Turn off the main power.
While depressing the TUNING+ button or the
PRESET TUNING + button, press the ?/1 button to turn on
the main power. Either the message “9 k STEP” or “10 k STEP”
appears. Select the desired step.
While depressing the TUNING+ button or the
PRESET TUNING + button, press the ?/1 button to turn on
the main power. Either the message “9 k STEP” or “10 k STEP”
appears. Select the desired step.
SPEAKER SIZE SELECTION MODE
*Either Normal Speaker or Micro Satellite Speaker can be selected.
*Procedure:
While depressing the MAIN MENU button, press the ?/1 button
to turn the main power.
Either the message “NORM. SP.” or “MICRO SP.” is displayed.
Select the desired speaker size.
*Procedure:
While depressing the MAIN MENU button, press the ?/1 button
to turn the main power.
Either the message “NORM. SP.” or “MICRO SP.” is displayed.
Select the desired speaker size.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns on
one after another.
one after another.
* Procedure:
While depressing the FM MODE and the MD/TAPE buttons
simultaneously, press the ?/1 button to turn on the main power.
simultaneously, press the ?/1 button to turn on the main power.
1. All segments turn on.
2CH , A. F. D , MOVIE , MUSIC and MULTI CHANNEL
DECODING LED turn on.
DECODING LED turn on.
2. Press the VIDEO 1 button, confirm display.
2CH and MOVIE LED turn on.
3. Press the VIDEO 1 button, confirm display
A. F. D , MUSIC and MULTI CHANNEL DECODING LED
turn on.
turn on.
SW
L
SL
C
R
SSB SR
SLEEP
L F E
DIGITALEX
OPT
COAX MULTI CH IN 12
PROLOGIC II DTS-ES NEO : 6
SPB
SPA
SP
MPEG-2 AAC
STEREO MONO RDS
MEMORY
EQ
D.RANGE
D D
D D
dB
kHz
mft.
MHz
4. Press the VIDEO1 button, All segments and all LEDS turn off.
5. Every pressing of the VIDEO1 button turns on each segment
and LED one after another in the same order.
(Not only the VIDEO1 button, but also the other buttons such
as VIDEO2 , DVD , MD/TAPE , CD and TUNER FM/AM can
be used.)
(Not only the VIDEO1 button, but also the other buttons such
as VIDEO2 , DVD , MD/TAPE , CD and TUNER FM/AM can
be used.)
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
completion of repair.
* Procedure:
While depressing the 2CH button, press the ?/1 button to turn
on the main power.
The message “SF. CLR.” appears and initialization is performed.
on the main power.
The message “SF. CLR.” appears and initialization is performed.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
* Procedure:
While depressing the FM MODE and the DVD buttons
simultaneously, press the ?/1 button to turn on the main power.
The model name, destination and the software version are
displayed.
simultaneously, press the ?/1 button to turn on the main power.
The model name, destination and the software version are
displayed.
KEY CHECK MODE
* Button check
* Procedure:
* Procedure:
While depressing the MUSIC and the TUNING
−
buttons
simultaneously, press the power ?/1 button to turn on the main
power.
“REST 25” appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
power.
“REST 25” appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
COMMAND MODE SELECTION MODE
* The command mode (AV1 or AV2) of the remote commander can
be selected.
* Procedure:
1. While depressing the ENTER button, press the ?/1 button to
1. While depressing the ENTER button, press the ?/1 button to
turn on the main power.
2. The message “C.MODE.AV 1” or “C.MODE.AV 2” appears
for a moment. Select the desired mode.
SW
C
SSB
SLEEP
L F E
DIGITAL
OPT
MULTI CH IN 2
PROLOGIC DTS
SP
MPEG
AAC
STEREO
RDS
D D
D D
MHz
k
m
L
SL
R
SR
EX
COAX
1
II
-ES NEO : 6
SPB
SPA
-2
MONO
MEMORY
EQ
D.RANGE
dB
Hz
ft.
7
7
STR-K850P
• Waveforms
DIGITAL Board
For schematic diagrams.
Note:
Note:
• All capacitors are in
µ
F unless otherwise noted. p : pF. 50
WV or less are not indicated except for electrolytics and
tantalums.
tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
%
: indicates tolerance.
•
f
: internal component.
•
2
: nonflammable resistor.
•
5
: fusible resistor.
•
C
: panel designation.
•
A
: B+ Line.
•
B
: B– Line.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
No mark : FM
No mark : FM
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
tion tolerances.
• Waveforms are taken with a oscilloscope.
• Circled numbers refer to waveforms.
• Circled numbers refer to waveforms.
• Signal path.
F
: FM
J
: CD (ANALOG)
c
: DVD (DIGITAL)
• Abbreviation
CND : Canadian model
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this necessary note is printed in each
block.)
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this necessary note is printed in each
block.)
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(Side A)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Side B)
the parts face are indicated.
For printed wiring boards.
Note:
Note:
• X
: parts extracted from the component side.
•
a
: Through hole.
•
f
: internal component.
•
: Pattern from the side which enables seeing.
C
B
These are omitted.
E
Q
B
These are omitted.
C
E
1
IC1101
wa
(XOUT)
4.3Vp-p
1V/DIV, 40ns/DIV
81.4ns
(12.288MHz)
2
IC1201
9
(MCLK1)
3.4Vp-p
73.6ns (13.59MHz)
1V/DIV, 40ns/DIV
3
IC1601
id
(XI)
3.5Vp-p
62.5ns (16MHz)
1V/DIV, 40ns/DIV
SECTION 3
DIAGRAMS
3-1. Circuit Board Location
Note:
The components identi-
fied by mark
The components identi-
fied by mark
0
or dotted
line with mark
0
are criti-
cal for safety.
Replace only with part
number specified.
Replace only with part
number specified.
Note:
Les composants identifiés par
une marque
Les composants identifiés par
une marque
0
sont critiques
pour la sécurité.
Ne les remplacer que par une
piéce por tant le numéro
spécifié.
Ne les remplacer que par une
piéce por tant le numéro
spécifié.
MAIN board
BRIDGEABLE board
DISPLAY board
HEADPHONE board
STANDBY board
VIDEO board
S-VIDEO board
DIGITAL board
VOLUME board
POWER board