DOWNLOAD Sony HT-1700D / HT-5500D / HT-DDW740 / HT-DDW840 / STR-K740P / STR-K840P Service Manual ↓ Size: 9.96 MB | Pages: 43 in PDF or view online for FREE

6

* All preset contents are reset to the default setting.
* Procedure:

While depressing the  VIDEO 1  and the  2CH  buttons simul-
taneously, press the power  ?/1  button to turn on the main power.
The message “FACTORY” appears and switch off the set.
While depressing the  VIDEO 1  and the  2CH  buttons simul-
taneously, press the power  ?/1  button again. The message
“FACTORY” appears and the present contents are reset to the
default values.

* Either the 9 kHz step or 10 kHz step can be selected for the AM

channel step.

* Procedure:

Set the FUNCTION to AM.  Turn off the main power.
While depressing the  TUNING+ button or the
PRESET+ button, press the power  ?/1  button to turn on the
main power.  Either the message “9 k STEP” or “10 k STEP”
appears.  Select the desired step.

* For US/Canadian/E model only

*Either Normal Speaker or Micro Satellite Speaker can be selected.
*Procedure:
 While depressing the  LEVEL  button, press the power  ?/1  button
to turn the main power.
Either the message “NORM. SP.” or “MICRO SP.” is displayed.
Select the desired speaker size.

* All fluorescent segments are tested.  When this test is activated,

all segments turn on at the same time, then each segment turns on
one after another.

* Procedure:

While depressing the  MD/TAPE  and the  SHIFT  buttons simul-
taneously, press the power  ?/1  button to turn on the main power.

1. All segments turn on.

MULTI CHANNEL DECODING , Digital Cinema Sound ,
A.F.D. , MODE , 2CH and SET UP LED turn on.

2. Press the  VIDEO  button, confirm display.

A.F.D. , MODE , LEVEL , SET UP , and Digital Cinema Sound
LED turn on.

3. Press the  VIDEO  button, confirm display

MULTI CHANNEL DECODING , 2CH , SURR and NAME
LED turn on.

4. Press the  VIDEO  button, All segments turn off.

5. Every pressing of the VIDEO  button turns on each

segment and LED one after another in the same order.
(Not only the  VIDEO  button, but also the other buttons such as
DVD/LD , TV/SAT , MD/TAPE , CD , TUNER and AUX can
be used.)

* The preset sound field is cleared when this mode is activated.

Use this mode before returning the product to clients upon
completion of repair.

* Procedure:

While depressing the  MODE  button, press the power  ?/1  button
to turn on the main power.
The message “SURR. CLR.” appears and initialization is
performed.

* Demonstration is performed.
* Procedure :

While depressing the  SET UP  button, press the power  ?/1
button. The message appears and demonstration is performed.

* To finish DEMONSTRATION MODE, press the power ?/1

button while the introduction message appears in the display.

* The software version is displayed.
* Procedure:

While depressing the ENTER and the A.F.D buttons
simultaneously, press the power  ?/1  button to turn on the main
power.  The model name, destination and the software version are
displayed.

* Button check
* Procedure:

While depressing the VIDEO 1 and the SHIFT buttons
simultaneously, press the power  ?/1  button to turn on the main
power.
“REST 39” appears. (AEP, UK, model: “RESET 38”)
Every pressing of any button other than  ?/1  and  SPEAKERS
counts down the buttons.  The buttons which are already counted
once are not counted again.  When all buttons are pressed “REST
00” appears.
When MASTER VOLUME is rotated in clockwise direction,
“VOL MIN”, “VOL 1” to “VOL 48”, “VOL MAX” appear.

SW

L

SL

C

R

S

SR

SLEEP

SP.OFF

( ( ( L F E ) ) )

DIGITAL

OPT COAX MULTI CH IN

PRO LOGIC DTS MPEGSTEREO MONO RDS

MEMORY

MUTING

INFO

NEWS

TA

EQ

D.RANGE

dB

kHz

mft.

MHz

SW

L

R

S

SLEEP

 L F E 

COAX

PRO LOGIC

MPEGSTEREO

RDS

MUTING

INFO

TA

D.RANGE

k    

m   

MHz

SL

C

SR

SP.OFF

( ( (       ) ) )

DIGITAL

OPT

MULTI CH IN

DTS

MONO

MEMORY

NEWS

EQ

dB

  Hz
   ft.

7

* This mode is installed in the Europe models only. When this mode

is used, the receiver scans the broadcasts that can be received by
the tuner, and sets up the broadcasts. Be sure to start scanning
after connecting the antenna.

* Procedure:
1. Check that the antenna is connected.
2. Press the  ?/1  button to turn on the power while pressing the

MEMORY button.

3. The message “AUTO-BETICAL SELECT” appears and the

receiver starts scanning.

8

VIDEO board 

DIGITAL board 

MAIN board

DISPLAY board

HEADPHONE board

POWER SW board

STANDBY board

AC SELCT board (E model only)

9

9

• All capacitors are in µF unless otherwise noted. p : pF. 50

WV or less are not indicated except for electrolytics and
tantalums.

• All resistors are in 

Ω

 and 

1

/

4

 

W or less unless otherwise

specified.

•

%

: indicates tolerance.

•

f

: internal component.

• 2 : nonflammable resistor.
• 5 : fusible resistor.
• C : panel designation.

• A : B+ Line.
• B : B– Line.

• Voltages and waveforms are dc with respect to ground

under no-signal (detuned) conditions.
No mark : FM

• Voltages are taken with a VOM (Input impedance 10 M

Ω

).

Voltage variations may be noted due to normal produc-
tion tolerances.

• Waveforms are taken with a oscilloscope.
• Circled numbers refer to waveforms.

• Signal path.

F

: FM

J

: CD (ANALOG)

c

: DVD (DIGITAL)

• Abbreviation

CND : Canadian model
MY

: Malaysia model

SP

: Singapore model

AR

: Argentine model

MX

: Mexican model

Note:
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.

Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.

Caution:
Pattern face side:

Parts on the pattern face side seen from

(Side A)

the pattern face are indicated.

Parts face side:

Parts on the parts face side seen from

(Side B)

the parts face are indicated.

• X : parts extracted from the component side.
•

a

: Through hole.

•

f

: internal component.

•

: Pattern from the side which enables seeing.

C

B

These are omitted.

E

Q

B

These are omitted.

C

E