Sony HS-WD1 Service Manual ▷ View online
SERVICE MANUAL
Published by Sony Techno Create Corporation
Sony Corporation
Audio&Video Business Group
HS-WD1
SPECIFICATIONS
DIGITAL MEDIA WALL PORT
9-889-381-01
2009A04-1
©
2009.01
US Model
Ver. 1.0 2009.01
Input and output terminals
RJ45: T568B Terminated. GH (only for connection to HS-MB1
RJ45: T568B Terminated. GH (only for connection to HS-MB1
(Distribution Panel)) (H DC 19.5 V included)
DMPORT:
DC OUT 5 V, 700 mA
General
Power consumption:
Power consumption:
DC 19.5 V, 0.15 A (powered by HS-MB1)
Operating temperature:
0 °C - 30 °C (32 °F - 86 °F)
Storage temperature:
– 20 °C - 60 °C (– 4 °F - 140 °F)
Dimensions (wall port):
46 × 108 × 65 mm (1
7
/
8
× 4
1
/
4
× 2
5
/
8
inches)
(w/h/d)
Dimensions (cover panel): 80 × 124 × 5.5 mm (3
1
/
4
× 5 ×
1
/
4
inches)
(w/h/d)
Mass:
120 g (4.2 oz) (cover panel included)
Design and specifi cations are subject to change without notice.
Unpacking
• HS-WD1 (1)
• Cover panel (1)
• Screws for single gang J-box (long) (2)
• Screws for cover panel (short) (2)
• Installer’s manual (this manual) (1)
• HS-WD1 (1)
• Cover panel (1)
• Screws for single gang J-box (long) (2)
• Screws for cover panel (short) (2)
• Installer’s manual (this manual) (1)
The other units referred to in this manual are optional. Prepare necessary
units depending on your system.
units depending on your system.
Connecting the CAT5 cables to the wall port
When the wall is finished, connect the CAT5 cables to the rear of the wall port.
1
Attach RJ45 connectors to the ends of the CAT5 cables.
For details, see “Connecting RJ45 connectors to CAT5 cables”.
2
Connect the CAT5 cables so that the letters such as ( or )
indicated on the wall port and Distribution Panel (HS-MB1) match
each other.
indicated on the wall port and Distribution Panel (HS-MB1) match
each other.
DMP
ORT
DC5
V
0.7A MA
X
Rear of the wall port
PARTS LIST
4-108-086-01 PLATE (S), ORNAMENTAL (COVER PANEL)
4-113-752-11
MANUAL, INSTALLATION (ENGLISH)
4-123-926-01 SCREW (WALL PLATE) (for COVER PANEL)
4-874-614-82 +BV TAPPING SCREW TYPE-1 3.5
(for SINGLE GANG J-BOX)
A-1557-947-A OVERALL
ASSY
(HS-WD1)
Ref. No.
Part No.
Description
Remark
HS-WD1
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2009.01
New
Display