Sony HCD-ZX70DVD / MHC-ZX70DVD Service Manual ▷ View online
17
1
two screws
(BVTP 3
(BVTP 3
×
8)
2
two screws
(BVTP 3
(BVTP 3
×
8)
3
Remove the tape mechanism
deck section.
deck section.
FRONT PANEL
- BACK VIEW -
- BACK VIEW -
When connecting the cable from PANEL board (CN704) to CD board (CN754),
set it as shown in the figure.
set it as shown in the figure.
CN704
CN754
PANEL board
cable
CD board
TAPE MECHANISM DECK (TCM-230AWR12)
CABLE SETTING
18
GEARS INSTALLATION
(Page 18)
SLIDER (SELECTION) INSTALLATION
(Page 19)
STOCKER SECTION INSTALLATION
(Page 19)
CHASSIS (MOLD B) SECTION
INSTALLATION (Page 20)
1
Slide the slider (u/d)
fully in the arrow
direction.
fully in the arrow
direction.
3
gear (gear B)
2
gear (U/D slider)
4
gear (gear A)
portion A
Adjust the gear (gear B) with the
portion A as shown.
portion A as shown.
slider (U/D) gear
Adjust the gear so that it meshes with
the bottom tooth of slider (U/D) gear,
as shown.
the bottom tooth of slider (U/D) gear,
as shown.
gear
(gear B)
(gear B)
linearly
Adjust so as to be aligned with
gear B linearly, as shown.
gear B linearly, as shown.
GEARS INSTALLATION
Note:
Follow the assembly procedure in the numerical order given.
SECTION 4
ASSEMBLY
19
2
portion A of tray (sub)
1
stocker section
3
two step screws
3
two step screws
Hook the portion A of tray (sub)
to the slider (selection).
to the slider (selection).
portion A
of tray (sub)
of tray (sub)
sticking of
slider (selection)
slider (selection)
2
gear (chuking)
6
two screws
(PTPWH M2.6)
(PTPWH M2.6)
5
washer
3
convex portion of
slider (selection)
slider (selection)
4
compression spring
7
Insert the slider (selection)
into the portion A.
1
rotary encoder
rotary encoder
Align with the slot of
rotary encoder.
rotary encoder.
align marking
portion A
Gear (chuking)
Insert a convex portion into
a groove of gear (chuking).
a groove of gear (chuking).
SLIDER (SELECTION) INSTALLATION
STOCKER SECTION INSTALLATION
20
3
three screws
(BVTP M2.6)
(BVTP M2.6)
2
Insert the gear (eject0
under the gear (LD
deceleration).
under the gear (LD
deceleration).
1
Insert the portion A of
chassis (mold B) section
into the portion B of
slider (selection).
chassis (mold B) section
into the portion B of
slider (selection).
gear (LD deceleration)
portion A
portion B of
slider (selection)
slider (selection)
CHASSIS (MOLD B) SECTION INSTALLATION
Click on the first or last page to see other HCD-ZX70DVD / MHC-ZX70DVD service manuals if exist.