Sony HCD-XB88AVK / HCD-XB88K / LBT-XB88AVK / LBT-XB88KS Service Manual ▷ View online
– 6 –
SECTION 2
DISASSEMBLY
Note:
Follow the disassembly procedure in the numerical order given.
2-1. FRONT PANEL
2-2. MAIN BOARD
1
Three flat type wiers
(CN401,CN402,CN701)
3
Front panel
2
Four screws (BVTP3x8)
4
Back panel
2
Thirteen screws (BVTP3x8)
1
Flat type wire (CN1)
9
Main board
!º
Connector (CN961)
6
Connector (CN830)
8
Connector (CN901)
7
Two screws (BVTP3x8)
5
Flat type wire (CN801)
3
Power cord
– 7 –
2-3. TAPE MECHANISM DECK
2-4. CASSETTE LID ASSEMBLY
A
4
Three screws (BVTP2.6x8)
3
Three screws (BVTP2.6x8)
5
Remove the tape mechanism deck
section to direction of arrow
A
.
2
Open the cassette lid.
1
Push the two buttons.
3
Two brackets.
2
Two screws (BVTP2.6x8)
1
Two springs.
4
Cassette lid assembly
– 8 –
2-5. CD LID ASSEMBLY
2-6. CD MECHANISM DECK
2-7. BASE UNIT
2
Connector (CN671)
1
Four screws (BVTP2.6x8)
4
CD lid assembly
3
Connector (CN661)
1
Five screws (BVTP3x8)
2
CD mechanism
deck
3
Base unit
1
Yoke bracket
2
Boss
– 9 –
2-8. DISC TABLE
NOTE:
When the disc table is installed, adjust the positions of
roller cam and mark ” as shown in the figure, then set to
the groove of disc table.
roller cam and mark ” as shown in the figure, then set to
the groove of disc table.
A
A
2
Screw (BVTP3X8)
3
Bracket (BU)
1
Screw (BVTP3X8)
4
Stop screw
5
Disc table
Click on the first or last page to see other HCD-XB88AVK / HCD-XB88K / LBT-XB88AVK / LBT-XB88KS service manuals if exist.