DOWNLOAD Sony HCD-VZ10 Service Manual ↓ Size: 8.83 MB | Pages: 92 in PDF or view online for FREE

Model
HCD-VZ10
Pages
92
Size
8.83 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
hcd-vz10.pdf
Date

Sony HCD-VZ10 Service Manual ▷ View online

10
3-5. MAIN BOARD, FRONT AMP BOARD
3-6. CD BASE UNIT
(BU-K2BD37A)
1
connector
      (CN713)
7
connector
      (CN913)
8
connector
      (CN801)
5
two connectors
      (CN803, CN804)
6
MAIN board
2
flat type wire (17core)
      (CN522)
3
flat type wire (13core)
      (CN523)
4
two screws
(BVTP 3 
× 8)
9
two screws
(BVTP 3 
× 16)
0
two screws
(BVTP 3 
× 8)
qs
two screws
(BVTP 3 
× 8)
qa
heat sink
qd
Remove the FRONT AMP board
in the arrow direction.
1
three screws
(BVTP 3 
× 6)
3
two screws
(PTPWH M 2.6)
5
two screws
(PTPWH M 2.6)
4
spring (insulator),
      compression
6
spring (insulator),
      compression
7
CD base unit
     (BU-K2BD37A)
2
chassis
11
3-7. CD MECHANISM DECK SECTION
(CDM53F-K2BD37A)
3-8. FITTING BASE (GUIDE) ASSY, BRACKET (CHASSIS) AND
FITTING BASE (MAGNET) ASSY
1
three screws
(BVTT 3 
× 6)
5
CD mechanism deck section
      (CDM53F-K2BD37A)
2
two screws
(BVTT 3 
× 6)
4
four screws
(sumitite (B3), +BV)
3
chassis, sub
qs
four screws
(BVTP M2.6)
7
four screws
(BVTP M2.6)
0
bracket
(chassis)
9
five screws
(BVTP M2.6)
qa
connector
(CN710)
1
connector
(CN501)
6
two connectors
(CN709, 715)
qd
base (magnet) assy, fitting 
8
base 
     (guide) assy, fitting 
2
screw
(BVTP 3 
× 8)
4
screw
(BVTP 
          3 
× 8)
3
VIDEO board
5
bracket (VCD)
12
3-9. TRAY  (SUB)
3-10. CHASSIS (MOLD B) SECTION, STOCKER SECTION AND
SLIDER (SELECTION)
Note : In mounting the parts, refer to page 12 and 13.
pulley (LD)
stocker
section
tray (sub)
pulley (mode)
slider (selection)
1
Rotating the pulley (LD), shift the slider (selection) in the arrow A direction.
2
Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
3
Rotating the pulley (LD), shift the slider (selection) in the arrow B direction.
4
Rotating the pulley (mode) in the arrow direction, remove the tray (sub) to be removed.
A
B
5
stocker
section
4
two step
screws
4
two step screws
3
gear (eject)
2
chassis (mold B) section
Note: Rotating the pulley (LD),
shift the slider (selection)
to the left.
9
compression
spring
7
slider (selection)
8
washer
6
two screws
(PTPWH M2.6)
1
three screws
(BVTP M2.6)
pulley (LD)
13
3-11. GEARS INSTALLATION
3-12. SLIDER (SELECTION) INSTALLATION
1
Slide the slider (U/D)
fully in the arrow
direction.
3
gear (gear B)
2
gear (U/D slider)
4
gear (gear A)
Adjust the gear (gear B) with the 
portion A as shown.
Adjust the gear so that it meshes with
the bottom tooth of slider (U/D)gear,
as shown.
portion A
slider (U/D) gear
linearly
gear
(gear B)
Adjust so as to be aligned with
gear (B) linearly,as shown.
portion A
2
gear (chuking)
6
two screws
(PTPWH M2.6)
5
washer
3
convex portion of
slider (selection)
4
compression spring
7
Insert the slider (selection)
into the portion A.
1
rotary encoder
rotary encoder
Align with the slot of
rotary encoder.
align marking
gear (chuking)
Insert a convex portion into
a groove of gear (chuking).
Page of 92
Display

Click on the first or last page to see other HCD-VZ10 service manuals if exist.