Sony HCD-TB10 Service Manual ▷ View online
6
HCD-TB10
Setting the clock
1
Turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
“CLOCK” appears.
3
Press . or > on the remote to set
the hour.
4
Press ENTER.
The minute indication flashes.
5
Press . or > on the remote to set
the minute.
6
Press ENTER.
The clock starts working.
Tip
If you make a mistake while setting the clock,
press x, then start over from step 2.
press x, then start over from step 2.
To adjust the clock
1
Press CLOCK/TIMER SET on the remote.
2
Press . or > on the remote to select
“CLOCK”, then press ENTER.
“CLOCK”, then press ENTER.
3
Do the same procedures as step 3 to 6
above.
above.
Note
You cannot set the clock in the Power Saving Mode.
When you play
a CD single (8
cm CD), place
it on the inner
circle of the
tray.
a CD single (8
cm CD), place
it on the inner
circle of the
tray.
3
Press Z again to close the disc tray.
Loading a CD
1
Press Z.
The disc tray opens.
2
Place a CD with the label side up on the
disc tray.
7
HCD-TB10
SECTION 3
DISASSEMBLY
Note :
Follow the disassembly procedure in the numerical order given.
•
The equipment can be removed using the following procedure.
SET
SIDE PANEL
CASSETTE MECHANISM
(CMAL1Z222A)
TOP PANEL
FRONT PANEL
• The dotted square with arrow ( ) prompts you to move to the next
job when all of the works within the dotted square ( )are completed.
SUB TRANSFORMER BOARD,
BACK PANEL
CDM BOARD,
CD MECHANISM
DECK (CDM55C-K6A)
POWER TRANSFORMER,
P-AMP BOARD
CAM (CDM55)
MOTOR (TRAY) BOARD
HOLDER ASSY
MOTOR BOARD
MAIN BOARD
H/P BOARD,
PANEL BOARD
LCD BOARD,
BACK LIGHT BOARD
VOL BOARD
8
HCD-TB10
3-1. Side Panel
3-2. Top Panel
Note: Attach it so that it
pressed down the
MAIN board.
MAIN board.
3
top panel
(Remove in the direction
of the arrow.)
of the arrow.)
2
screw
(
+BVTP 2.6
×
8)
1
screw
(
+BVTP 2.6
×
8)
4
screw
(
+BVTP 2.6
×
8)
6
flat cable (9 core)
(CN404)
(CN404)
5
connector
2
four screws
(
CASE 3 TP2)
5
four screws
(
CASE 3 TP2)
1
two screws
(
+BVTP 3
×
10)
4
two screws
(
+BVTP 3
×
10)
3
side panel (R)
(Remove in the direction
of the arrow.)
of the arrow.)
6
side panel (L)
(Remove in the direction
of the arrow.)
of the arrow.)
9
HCD-TB10
3-3. Cassette Mechanism (CMAL1Z222A)
7
cassette mechanism deck
(CMAL1Z222A)
6
flat cable (9 core)
1
two screws
(
+BVTP 2.6
×
8)
2
two screws
(
+BVTP 2.6
×
8)
4
screw
(
+PTPWH 2.6
×
5)
3
screw
(
+PTPWH 2.6
×
5)
5
shield tc
(Cassette mechanism)
3-4. Front Panel
5
three screws
(
+BVTP 3
×
10)
6
front panel
2
flat cable (30 core)
(CN403)
(CN403)
3
flat cable (15 core)
(CN733)
(CN733)
4
connector
(CN304)
(CN304)
1
screw
(
+BVTP 2.6
×
8)
Click on the first or last page to see other HCD-TB10 service manuals if exist.