DOWNLOAD Sony HCD-SHAKE33 / HCD-SHAKE44 / HCD-SHAKE55 / HCD-SHAKE66 / HCD-SHAKE77 / HCD-SHAKE88 Service Manual ↓ Size: 12.91 MB | Pages: 126 in PDF or view online for FREE

1.0

2014.01

New

1.1

2014.04

Addition of HCD-SHAKE44, HCD-SHAKE55, HCD-SHAKE66 and HCD-SHAKE88 model.

Add illustration of CLAMP, SLEEVE FERRITE in page 12 and 89.

Add illustration of CLAMP in page 90.

Add Ref. No. 54 and 104 in MISCELLANEOUS section.

Change illustration of CUSHION, SMPS in page 93.

1.2

2014.05

Addition of Argentina model (HCD-SHAKE33/SHAKE55/SHAKE77).

Add C2116, C2118, C2119 and C2120 in STR board for HCD-SHAKE55/SHAKE66/SHAKE77/

SHAKE88.

Add C2104, C2105, C2106 and C2107 in STR board for HCD-SHAKE33/SHAKE44.

Add C905 in MOTHERBOARD board.

Add P/N and description of C1109, C1110, C1198, C1199, C1364 and C1365 in 6CH DAMP board for

HCD-SHAKE55/SHAKE66.

Change description of REGULATOR, SWITCHING (SSNBPR) for HCD-SHAKE55/SHAKE66.

Change destination of Ref. No. 103 in page 90 and 124.

Change destination of Ref. No. 252 in page 93 and 124.

Change of 4CH DAMP Board (Suffi x 12).

Change P/N of C1188, C1193, C1194, C1213, C1214, C1221, C1265, C1270, C1271, C1293, C1294 and

C1300 in 4CH DAMP Board.

Change P/N of C1035, C1036, C1044, C1099, C1105, C1106, C1128, C1129, C1137, C1347, C1355, 

C1356, C1382, C1383, C1387, C1443, C1455 and C1456 in 6CH DAMP Board. 

Change P/N and description of C1198, C1199, C1275 and C1276 in 4CH DAMP board.

Change P/N and description of IC306 in MOTHERBOARD board (Service code changed).

Change P/N and description of C5000 in VIDEO board for HCD-SHAKE44/SHAKE66/SHAKE88.

Change P/N and description of Ref. No. 254 in page 93 and 124.

Delete of R1499 and R1510 in 6CH DAMP board.

Delete of CN106, CN304 and CN305 in MOTHERBOARD board for HCD-SHAKE44/SHAKE55/

SHAKE66/SHAKE88.

Delete of Q011, Q012, Q013, Q014, Q017, R064, R065, R066, R067, R069, R070, R074 and R075 in

MOTHERBOARD board.

Delete of C5001 and R5001 in VIDEO board for HCD-SHAKE44/SHAKE66/SHAKE88.

Delete Servicing Notes for IC306 in MOTHERBOARD board (Service code changed).

1.3

2014.07

Add NOTE OF REPLACING THE COMPLETE MOTHERBOARD BOARD (SHAKE55: US/SHAKE66:

MY/SHAKE88: EA) in page 6.

Add P/N and description for MOTHERBOARD BOARD, COMPLETE (SHAKE55: US (Type B)/

SHAKE66: MY (Type F)/SHAKE88: EA (Type D)) in page 92 and 111.

Add service note in page 92 and 111.

Change description of C1198, C1199, C1275 and C1276 in 4CH DAMP board (SHAKE33/SHAKE44).

Change description of C1109, C1110, C1198, C1199, C1364 and C1365 in 6CH DAMP board (SHAKE55/

SHAKE66).

Change description for MOTHERBOARD BOARD, COMPLETE (SHAKE55: US/SHAKE66: MY/

SHAKE88: EA) in page 92 and 111.

Change P/N of CN1001 and CN1003 in 4CH DAMP board (SHAKE33/SHAKE44).

Change P/N of CN451 in MOTHERBOARD board.

Change P/N of CN501 and CN502 in MOTHERBOARD board (Service code changed).

Change P/N of CN901 in MOTHERBOARD board (SHAKE44/SHAKE66/SHAKE88).

Change P/N of CN5000 in VIDEO board (SHAKE44/SHAKE66/SHAKE88).

Change P/N of Ref. No. #1 and #2 in page 88, 89, 90, 91, 92 and 93.

Change P/N of REGULATOR, SWITCHING (SSNBPR) (SHAKE55/SHAKE66) in page 93 and 124.

Change P/N and description of Ref. No. 254 (SHAKE44: MY/SHAKE88: MY) in page 93 and 124.

Change P/N and description of C023 in MOTHERBOARD board (EXCEPT SHAKE33).

Change P/N and description of CN101 and CN301 in MOTHERBOARD board.

Change P/N and description of CN3000 in TUNER board.

Delete C905 in MOTHERBOARD board (SHAKE33/SHAKE55/SHAKE77).

1.4

2014.12

Add CLAMP, SLEEVE FERRITE illustration in page 90 (SHAKE33/SHAKE44).

Add STOPPER, WIRING illustration in page 90.

Change CLAMP to STOPPER, WIRING on REGULATOR, SWITCHING in page 15 and 93.

Change of 4CH DAMP Board (Suffi x 22).

Change sentence for CLASS 1 LASER product in page 4.

Change P/N of Ref. No. 152 (SHAKE44) in page 91.

Change P/N of Ref. No. 258 (SHAKE33/SHAKE44) in page 93 and 124.

Change P/N of IC105 in MOTHERBOARD board.

Delete CLAMP in page 90.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note:  If you still see the original page, press the [Enter] key again.

Change P/N of CN1001 and CN1003 in 4CH DAMP board (SHAKE33/SHAKE44).

Change P/N of CN451 in MOTHERBOARD board.

Change P/N of CN501 and CN502 in MOTHERBOARD board (Service code changed).

Change P/N of CN901 in MOTHERBOARD board (SHAKE44/SHAKE66/SHAKE88).

Change P/N of CN5000 in VIDEO board (SHAKE44/SHAKE66/SHAKE88).

Change P/N of Ref. No. #1 and #2 in page 88, 89, 90, 91, 92 and 93.

Change P/N of REGULATOR, SWITCHING (SSNBPR) (SHAKE55/SHAKE66) in page 93 and 124.

Change P/N and description of Ref. No. 254 (SHAKE44: MY/SHAKE88: MY) in page 93 and 124.

Change P/N and description of C023 in MOTHERBOARD board (EXCEPT SHAKE33).

Change P/N and description of CN101 and CN301 in MOTHERBOARD board.

Change P/N and description of CN3000 in TUNER board.

Delete C905 in MOTHERBOARD board (SHAKE33/SHAKE55/SHAKE77).

1.4

2014.12

Add CLAMP, SLEEVE FERRITE illustration in page 90 (SHAKE33/SHAKE44).

Add STOPPER, WIRING illustration in page 90.

Change CLAMP to STOPPER, WIRING on REGULATOR, SWITCHING in page 15 and 93.

Change of 4CH DAMP Board (Suffi x 22).

Change sentence for CLASS 1 LASER product in page 4.

Change P/N of Ref. No. 152 (SHAKE44) in page 91.

Change P/N of Ref. No. 258 (SHAKE33/SHAKE44) in page 93 and 124.

Change P/N of IC105 in MOTHERBOARD board.

Delete CLAMP in page 90.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note:  If you still see the original page, press the [Enter] key again.

Change P/N of CN1001 and CN1003 in 4CH DAMP board (SHAKE33/SHAKE44).

Change P/N of CN451 in MOTHERBOARD board.

Change P/N of CN501 and CN502 in MOTHERBOARD board (Service code changed).

Change P/N of CN901 in MOTHERBOARD board (SHAKE44/SHAKE66/SHAKE88).

Change P/N of CN5000 in VIDEO board (SHAKE44/SHAKE66/SHAKE88).

Change P/N of Ref. No. #1 and #2 in page 88, 89, 90, 91, 92 and 93.

Change P/N of REGULATOR, SWITCHING (SSNBPR) (SHAKE55/SHAKE66) in page 93 and 124.

Change P/N and description of Ref. No. 254 (SHAKE44: MY/SHAKE88: MY) in page 93 and 124.

Change P/N and description of C023 in MOTHERBOARD board (EXCEPT SHAKE33).

Change P/N and description of CN101 and CN301 in MOTHERBOARD board.

Change P/N and description of CN3000 in TUNER board.

Delete C905 in MOTHERBOARD board (SHAKE33/SHAKE55/SHAKE77).

1.4

2014.12

Add CLAMP, SLEEVE FERRITE illustration in page 90 (SHAKE33/SHAKE44).

Add STOPPER, WIRING illustration in page 90.

Change CLAMP to STOPPER, WIRING on REGULATOR, SWITCHING in page 15 and 93.

Change of 4CH DAMP Board (Suffi x 22).

Change sentence for CLASS 1 LASER product in page 4.

Change P/N of Ref. No. 152 (SHAKE44) in page 91.

Change P/N of Ref. No. 258 (SHAKE33/SHAKE44) in page 93 and 124.

Change P/N of IC105 in MOTHERBOARD board.

Delete CLAMP in page 90.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note:  If you still see the original page, press the [Enter] key again.