Sony HCD-RV2 / HCD-RV5 / HCD-RV6 Service Manual ▷ View online
5
HCD-RV2/RV5/RV6
[CD Service Mode]
• This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the optical pick-up.
Procedure:
1. Press ?/1 button to turn the set ON.
2. Select the function “CD”.
3. Press three buttons x , MUSIC EQ , and DISC 3 simulta-
1. Press ?/1 button to turn the set ON.
2. Select the function “CD”.
3. Press three buttons x , MUSIC EQ , and DISC 3 simulta-
neously.
4. The CD service mode is selected.
5. With the CD in stop status, press M + button to move the
5. With the CD in stop status, press M + button to move the
optical pick-up to outside track, or press – m button to inside
track.
track.
6. To release this mode, press the ?/1 button.
Error History Display
1. CDM Error History <CDM58E Error History Display>
11 digits are displayed after the M character.
11 digits are displayed after the M character.
Example of display : M0FF400220000
1st digit
: Indicates the error history number.
0 is the latest error
2nd to 3rd digits
: Indicates the details of the problem.
01 : Initialization table is currently rotating 1
02 : Initialization table is currently rotating 2
03 : Initialization table is currently rotating 3
04 : Currently DISC SKIP in OPEN mode
05 : CLOSE table is currently rotating
06 : Chucking table is currently rotating
07 : Currently performing SHIP operations
08 : Currently performing release operations
09 : Currently performing POWER OFF
02 : Initialization table is currently rotating 2
03 : Initialization table is currently rotating 3
04 : Currently DISC SKIP in OPEN mode
05 : CLOSE table is currently rotating
06 : Chucking table is currently rotating
07 : Currently performing SHIP operations
08 : Currently performing release operations
09 : Currently performing POWER OFF
operations
4th to 5th digits
: Processing when problems occur
01 : Currently performing SHIP operations
02 : Currently performing POWER OFF
02 : Currently performing POWER OFF
operations
03 : Currently initializing
04 : Currently performing release operations
05 : Currently in chuck stop state
06 : Currently performing CLOSE operations
07 : Currently performing exchange CLOSE
04 : Currently performing release operations
05 : Currently in chuck stop state
06 : Currently performing CLOSE operations
07 : Currently performing exchange CLOSE
operations
08 : Currently performing OPEN operations
09 : Currently performing OPEN POP UP
09 : Currently performing OPEN POP UP
operations
0A : Currently performing exchange OPEN
operations
6 to 7th digits
: Operations currently performed for problems
which have occurred
8th to 9th digits
: Targets of processing when problems occur
Same as 4th to 5th digits
10th to 11th digits : Fixed at 00
[CD Ship Mode (No Memory Clear)]
• This mode moves the position to the position durable to vibra-
tion Use this mode when returning the set to the customer after
repair.
repair.
Procedure:
1. Press ?/1 button to turn the set ON.
2. Press three CD button and ?/1 button simultaneously.
3. After the “STANBY” display blinks six times, a message
1. Press ?/1 button to turn the set ON.
2. Press three CD button and ?/1 button simultaneously.
3. After the “STANBY” display blinks six times, a message
“LOCK” is displayed on the fluorescent indicator rube, and the
CD ship mode is set.
CD ship mode is set.
[CD Ship Mode (Memory Clear)]
• This mode moves the pickup to the position durable to vibra-
tion. Use this mode when returning the set to the customer after
repair.
repair.
Procedure:
1. Press ?/1 button to turn the set ON.
2. Press three buttons ENTER , DISC 1 , and CD button simul-
1. Press ?/1 button to turn the set ON.
2. Press three buttons ENTER , DISC 1 , and CD button simul-
taneously.
3. After the “STANDBY” display blinks six times, a message
“LOCK” is displayed on the fluorescent indicator tube, and the
CD ship mode is set.
CD ship mode is set.
6
HCD-RV2/RV5/RV6
[REPEAT 5 LIMIT OFF MODE]
• This mode is used to enable infinite repetitions.
Normally, the number of repetitions allowed is 5.
Procedure:
1. Press ?/1 button to turn ON the power supply.
2. Set the function “DVD”.
3. Press three burtons x , MUSIC EQ and DISC 2 is simulta-
1. Press ?/1 button to turn ON the power supply.
2. Set the function “DVD”.
3. Press three burtons x , MUSIC EQ and DISC 2 is simulta-
neously.
4. Infinite repetitions is enabled.
5. This state is maintained ( memorized ) until COLD RESET is
5. This state is maintained ( memorized ) until COLD RESET is
executed.
2. MECHANICAL ADJUSTMENTS
Precaution
1. Clean the following parts with a denatured alcohol-moistened
swab:
record/playback heads
pinch rollers
erase head
rubber belts
capstan
idlers
2. Demagnetize the record/playback head with a head demagne-
tizer.
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the
4. After the adjustments, apply suitable locking compound to the
parts adjusted.
5. The adjustments should be performed with the rated power sup-
ply voltage unless otherwise noted.
Torque Measurement
Mode
Torque meter
Meter reading
3.06 N • m to 6.96 N • m
FWD
CQ-102C
31 to 71 g • cm
(0.43 – 0.98 oz • inch)
FWD
0.19 N • m to 0.58 N • m
back tension
CQ-102C
2 to 6 g • cm
(0.02 – 0.08 oz • inch)
3.06 N • m to 6.96 N • m
REV
CQ-102RC
31 to 71 g • cm
(0.43 – 0.98 oz • inch)
REV
0.19 N • m to 0.58 N • m
back tension
CQ-102RC
2 to 6 g • cm
(0.02 – 0.08 oz • inch)
6.96 N • m to 14.02 N • m
FF/REW
CQ-201B
71 to 143 g • cm
(0.98 – 1.99 oz • inch)
9.80 N • m
FWD tension
CQ-403A
100 g or more
(3.53 oz or more)
9.80 N • m
REV tension
CQ-403R
100 g or more
(3.53 oz or more)
7
HCD-RV2/RV5/RV6
3. ELECTRICAL ADJUSTMENTS
DECK SECTION
0 dB=0.775 V
1. Demagnetize the record/playback head with a head
demagnetizer.
2. Do not use a magnetized screwdriver for the adjustments.
3. After the adjustments, apply suitable locking compound to the
3. After the adjustments, apply suitable locking compound to the
parts adjust.
4. The adjustments should be performed with the rated power sup-
ply voltage unless otherwise noted.
5. The adjustments should be performed in the order given in this
service manual. (As a general rule, playback circuit adjustment
should be completed before performing recording circuit adjust-
ment.)
should be completed before performing recording circuit adjust-
ment.)
6. The adjustments should be performed for both L-CH and R-CH.
7. Switches and controls should be set as follows unless otherwise
7. Switches and controls should be set as follows unless otherwise
specified.
• Test Tape
Record/Playback Head Azimuth Adjustment
DECK A
DECK B
Note:
Perform this adjustments for both decks
Procedure:
1. Mode: Playback
1. Mode: Playback
2. Turn the adjustment screw and check output peaks. If the peaks
do not match for L-CH and R-CH, turn the adjustment screw so
that outputs match within 1dB of peak.
that outputs match within 1dB of peak.
3. Mode: Playback
4. After the adjustments, apply suitable locking compound to the
pats adjusted.
Adjustment Location: Playback Head (Deck A).
Record/Playback/Erase Head (Deck B).
set
main board
IC201
Pin
IC201
Pin
5
(PB OUT(R))
Pin
wh
(PB OUT(L))
main board
IC201
Pin
IC201
Pin
eh
(GND)
+
–
–
level meter
test tape
P-4-A100
(10 kHz, –10 dB)
P-4-A100
(10 kHz, –10 dB)
Screw
position
position
L-CH
peak
peak
within
1dB
1dB
Output
level
level
L-CH
peak
peak
R-CH
peak
peak
within
1dB
1dB
Screw
position
position
R-CH
peak
peak
MAIN
board
IC201
set
board
IC201
set
test tape
P-4-A100
(10 kHz, –10 dB)
P-4-A100
(10 kHz, –10 dB)
pin
5
oscilloscope
L-CH
R-CH
V
H
waveform of oscilloscope
in phase 45
°
90
°
135
°
180
°
good
wrong
pin
eh
pin
wh
L
R
forward
reverse
Tape
Signal
Used for
P-4-A100
10 kHz, –10 dB
Azimuth Adjustment
WS-48B
3 kHz, 0 dB
Tape Speed Adjustment
P-4-L300
315 Hz, 0 dB
Level Adjustment
8
HCD-RV2/RV5/RV6
TUNER SECTION
FM Tuned Level Adjustment
Procedure:
1. Supply a 25 dB 98 MHz signal from the ANTENNA terminal.
2. Tune the set to 98 MHz.
3. Adjust RV101 to the point (moment) when the TUNED indica-
1. Supply a 25 dB 98 MHz signal from the ANTENNA terminal.
2. Tune the set to 98 MHz.
3. Adjust RV101 to the point (moment) when the TUNED indica-
tor will change from going off to going on.
Adjustment Location: MAIN board
Null Adjustment
Procedure:
1. Supply a 60 dB 98 MHz signal from the ANTENNA terminal.
2. Tune the set to 98 MHz.
3. Measure voltage between pin 22 (AFC) and pin 3 (REG) of IC
1. Supply a 60 dB 98 MHz signal from the ANTENNA terminal.
2. Tune the set to 98 MHz.
3. Measure voltage between pin 22 (AFC) and pin 3 (REG) of IC
101. Adjust T101 ubtil the voltage becomes 0 V.
Adjustment Location: MAIN board
Adjustment Location
FM RF SSG
75
Ω
coaxial
Carrier frequency : 98 MHz
Modulation : AUDIO 1 kHz, 75 kHz
deviation (100%)
Output level : 25 dB (at 75
Modulation : AUDIO 1 kHz, 75 kHz
deviation (100%)
Output level : 25 dB (at 75
Ω
open)
FM ANTENNA terminal
(JK101)
(JK101)
set
FM RF SSG
75
Ω
coaxial
Carrier frequency : 98 MHz
Modulation : AUDIO 1 kHz, 75 kHz
deviation (100%)
Output level : 60 dB (at 75
Modulation : AUDIO 1 kHz, 75 kHz
deviation (100%)
Output level : 60 dB (at 75
Ω
open)
FM ANTENNA terminal
(JK101)
(JK101)
set
IC201
IC101
T101
NULL adjustment
NULL adjustment
RV101
FM TUNED LEVEL adjustment
FM TUNED LEVEL adjustment
12
1
1
40
31
30
21
20
11 10
24
13
JK101
- MAIN BOARD (component side)-
Click on the first or last page to see other HCD-RV2 / HCD-RV5 / HCD-RV6 service manuals if exist.