DOWNLOAD Sony HCD-ECL7D Service Manual ↓ Size: 6.11 MB | Pages: 38 in PDF or view online for FREE

Model
HCD-ECL7D
Pages
38
Size
6.11 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
hcd-ecl7d.pdf
Date

Sony HCD-ECL7D Service Manual ▷ View online

HCD-ECL7D
5
HOW  TO  EJECT  THE  DISC  WHEN  POWER  SWITCH  TURN  OFF
SERVICE  POSITION
3 Pull out the disc tray. 
1 Refer to “SECTION 2. DISASSEMBLY” (page 7), remove the side cover, 
 
the top cover block and the rear panel block from the unit. 
– Rear view –
2 Turn the traverse gear in 
 
the direction of an arrow. 
bottom side
top side
– Rear view –
MAIN board
POWER board
FRONT board
USB board
insulating sheet
HCD-ECL7D
6
SECTION  2
DISASSEMBLY
• 
This set can be disassembled in the order shown below.
2-1.  DISASSEMBLY  FLOW
2-2. SIDE 
COVER, 
 TOP 
COVER 
ASSY
 (Page 
7)
SET
2-3.  POWER CORD (AC1), 
 
REAR PANEL BLOCK
 (Page 
8)
2-4. CD 
DOOR
 (Page 
9)
2-6.  MAIN BOARD BLOCK
 (Page 
10)
2-8. POWER 
BOARD
 (Page 
11)
2-7. MAIN 
BOARD
 (Page 
10)
2-10. USB BOARD
 (Page 
13)
2-11. LOADER WITH FFC (TDL-5) (CDM1)
 (Page 
13)
2-9. FRONT 
BOARD
 (Page 
12)
2-5.  FRONT PANEL BLOCK
 (Page 
9)
HCD-ECL7D
7
Note: Follow the disassembly procedure in the numerical order given.
2-2.  SIDE  COVER,  TOP  COVER  ASSY
3
3
2 five claws
2 two claws
2 five claws
4 right side cover 
4 left side cover 
2 two claws
2 two claws
2 two claws
1 rear screw
 (black 
u 8)
1 rear screw
 (black 
u 8)
1 rear screw
 (black 
u 8)
1 rear screw
 (black 
u 8)
1 rear screw
 (black 
u 8)
1 rear screw
 (black 
u 8)
7 top cover assy
6 Remove the top cover assy
 
in the direction of an arrow.
5 four claws
HCD-ECL7D
8
2-3.  POWER  CORD (AC1),  REAR  PANEL  BLOCK
6 claw
6 claw
8 rear panel block
– Rear view –
6 claw
Note 2: When installing the rear 
 
panel block, check that
 
jacks are properly secured.
2
6 claw
5 screw
 (silver 
u 8)
5 screw
 (silver 
u 8)
5 screw
 (silver 
u 8)
5 screw
 (silver 
u 8)
OK
NG
Jacks are fitted to
the surface.
Jacks has been
depressed.
4 connector
 (XP16)
7 Remove the rear panel block
 
in the direction of an arrow.  
1 power cord connector
 (CN501)
3 power cord
 (AC1)
– Rear view –
‡ Power cord setting
– Rear view –
Note 1: When installing the power cord (AC1),
 
check the direction of connector.
Page of 38
Display

Click on the first or last page to see other HCD-ECL7D service manuals if exist.