Sony HCD-ECL77BT / HCD-ECL99BT Service Manual ▷ View online
HCD-ECL77BT/ECL99BT
5
DESTINATION ABBREVIATIONS
The following abbreviations for model destinations are used in this
service manual.
The following abbreviations for model destinations are used in this
service manual.
• Abbreviations
AR :
AR :
Argentina
model
BR
: Brazilian model
CND : Canadian model
E2
E2
: 120V AC area in E model
E4
: 220 – 240V AC area in E model
E51
: Chilean and Peruvian models
E93
: 240V AC area in E model
MX
: Mexican model
RU
: Russian model
CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistor to both ends of respective capacitors.
When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistor to both ends of respective capacitors.
• POWER
Board
CE503,
CE504
– POWER Board (Conductor Side) –
800
:/2 W
(for CE504)
800
:/2 W
(for CE503)
ABOUT PARTS REPAIR OF EACH BOARDS
When each boards installed in this unit are defective, individual
electrical parts that the mount is done cannot be replaced. When
each boards are defective, replace the mounted board or the whole
parts including an applicable board.
Printed wiring board and Schematic diagram that have been de-
scribed on this service manual are for reference.
When each boards installed in this unit are defective, individual
electrical parts that the mount is done cannot be replaced. When
each boards are defective, replace the mounted board or the whole
parts including an applicable board.
Printed wiring board and Schematic diagram that have been de-
scribed on this service manual are for reference.
NOTE THE REPLACING OF MAIN BOARD OR NFC
MODULE
When replacing the MAIN board or the NFC module, be sure re-
place both at the same time.
The MAIN board or the NFC module cannot replace with single.
MODULE
When replacing the MAIN board or the NFC module, be sure re-
place both at the same time.
The MAIN board or the NFC module cannot replace with single.
TEST DISCS
Use following TEST DISC (for CD) when this unit confi rms the
operation and checks it.
Use following TEST DISC (for CD) when this unit confi rms the
operation and checks it.
Part No.
Description
3-702-101-01 DISC
(YEDS-18),
TEST
4-225-203-01 DISC
(PATD-012),
TEST
RELEASING THE DISC TRAY LOCK
The disc tray lock function for the antitheft of sample disc in the
shop is equipped.
The disc tray lock function for the antitheft of sample disc in the
shop is equipped.
Releasing Procedure:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Press two buttons of the [x] and [Z] simultaneously for fi ve
seconds.
3. The message “UNLOCKED” is displayed on the fluorescent
indicator tube and the disc tray is unlocked.
Note: When “LOCKED” is displayed, the disc tray lock is not released by
turning power on/off with the [?/1] button.
HCD-ECL77BT/ECL99BT
6
HOW TO EJECT THE DISC WHEN POWER SWITCH TURN OFF
3 Pull out the disc tray.
1 Refer to “SECTION 2. DISASSEMBLY” (page 7), remove the side cover,
the top cover assy and the rear panel block from the unit.
– Rear view –
2 Turn the traverse gear
in the direction of the
arrow.
top side
– Rear bottom view –
HCD-ECL77BT/ECL99BT
7
SECTION 2
DISASSEMBLY
•
This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
2-2. SIDE
COVER,
TOP
COVER
ASSY
(Page
8)
SET
2-3. POWER CORD (AC1),
REAR PANEL BLOCK
(Page
9)
2-4. CD
DOOR
(Page
10)
2-6. MAIN CHASSIS BLOCK
(Page
(Page
11)
2-8. POWER
BOARD
(Page
12)
2-9. FUSE
(F501)
(Page
13)
2-7. MAIN
BOARD
(Page
11)
2-11. USB BOARD
(Page
(Page
14)
2-12. NFC MODULE
(Page
(Page
14)
2-14. SERVICE POSITION
(Page
(Page
15)
2-13. LOADER WITH FFC (TDL-5) (CDM1)
(Page
(Page
15)
2-10. FRONT BOARD
(Page
(Page
13)
2-5. FRONT PANEL BLOCK
(Page
(Page
10)
HCD-ECL77BT/ECL99BT
8
Note: Follow the disassembly procedure in the numerical order given.
2-2. SIDE COVER, TOP COVER ASSY
3
3
6 Remove the top cover assy
in the direction of the arrow.
7 top cover assy
2 five claws
2 two claws
2 five claws
4 right side cover
4 left side cover
5 four claws
2 two claws
2 two claws
2 two claws
1 rear screw
(black
3
u 8)
1 rear screw
(black
3
u 8)
1 rear screw
(black
3
u 8)
1 rear screw
(black
3
u 8)
1 rear screw
(black
3
u 8)
1 rear screw
(black
3
u 8)
Click on the first or last page to see other HCD-ECL77BT / HCD-ECL99BT service manuals if exist.