Sony HCD-DZ210D Service Manual ▷ View online
9
HCD-DZ210D
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Front panel
A "
/
1
(on/standby) (25)
B
Front panel display (85)
C A
(open/close) (25)
D
Disc operation (25)
E
FUNCTION (25)
F
(remote sensor) (9)
G
PHONES jack (25)
H
VOLUME control (25)
I
AUDIO IN/A.CAL MIC jack (16, 26)
J
Disc tray (25)
Rear panel
A
SPEAKER jacks (10)
B
COMPONENT VIDEO OUT jacks (21)
C
EURO AV
T
OUTPUT (TO TV) jack (10,
21)
D
AM terminal (10)
E
COAXIAL FM 75
Ω
jack (10)
F
ANTENNA DAB 75
Ω
jack (10)
COMPONENT VIDEO OUT
Y
P
B
/C
B
P
R
/C
R
(DVD
ONLY)
COAXIAL
AM
FM
75
SPEAKER
FRONT R
FRONT L
SUR R
SUR L
CENTER
WOOFER
EURO AV
OUTPUT(TO TV)
ANTENNA
DAB 75
Ω
Front panel display
About the indications in the front panel display
A
Lights up when the time information of
a title or chapter appears in the front
panel display. (DVD only) (40)
a title or chapter appears in the front
panel display. (DVD only) (40)
B
Lights up when a station is received.
(Radio only) (50)
(Radio only) (50)
C
Monaural/Stereo effect (Radio only)
(50)
(50)
D
Lights up when the sleep timer is set.
(57)
(57)
E
Lights up when the music or movie
mode is selected. (28)
mode is selected. (28)
F
Playing status (DVD function only)
G
Lights up when the DYNAMIC BASS is
selected. (56)
selected. (56)
H
Lights up when CD is loaded.
I
Lights up when the system outputs
progressive signals (DVD function
only). (22)
progressive signals (DVD function
only). (22)
J
Indicates the selected [SPEAKER
FORMATION]. (61)
FORMATION]. (61)
K
Current surround format (Except for
JPEG)
JPEG)
L
Displays system’s status such as
chapter, title, or track number, time
information, radio frequency, playing
status, sound field, etc.
chapter, title, or track number, time
information, radio frequency, playing
status, sound field, etc.
10
HCD-DZ210D
but “%” does not appear in the front panel
display). Depending on the DAB services
available in your area, this may take a few
minutes.
display). Depending on the DAB services
available in your area, this may take a few
minutes.
When scanning is complete,
“COMPLETE” appears in the front panel
display momentarily and an available
service component list is created.
“COMPLETE” appears in the front panel
display momentarily and an available
service component list is created.
Note
If your country or region does not support DAB
broadcast, “NO SERVICE” appears.
Do not press any button on the unit or remote during
DAB INITIAL SCAN. Scanning is interrupted and
service component list may not be created properly.
In this case, perform DAB INITIAL SCAN again.
service component list may not be created properly.
In this case, perform DAB INITIAL SCAN again.
If you move to another area, repeat this procedure to
store the stations for your new area.
This procedure clears all previously stored presets.
This procedure does not create any presets.
Listening to a DAB station
1
Press FUNCTION repeatedly until
“DAB” appears in the front panel
display.
“DAB” appears in the front panel
display.
The last received station is tuned in.
2
Press TUNING + or – repeatedly to
select a station you want.
select a station you want.
For continuous tuning, press and hold
TUNING + or –, then to release the button
to select the station you want.
TUNING + or –, then to release the button
to select the station you want.
When the system tunes in a station,
“TUNED” and “ST” (for stereo program or
joint (intensity) stereo program) appear in
the front panel display.
“TUNED” and “ST” (for stereo program or
joint (intensity) stereo program) appear in
the front panel display.
3
Adjust the volume by pressing
VOLUME +/–.
VOLUME +/–.
Note
You cannot select a DAB station by the D.TUNING
button and number buttons (direct tuning).
When tuning in a DAB station, it may take a few
seconds before you hear any sound.
Primary service is automatically received when
secondary service ends.
Presetting DAB stations
You can preset 30 DAB stations.
1
Press FUNCTION repeatedly until
“DAB” appears in the front panel
display.
“DAB” appears in the front panel
display.
The last received station is tuned in.
2
Tune in the station you want to preset.
3
Press MENU.
4
Press
X
/
x
repeatedly until “MEMORY”
appears in the front panel display.
5
Press ENTER.
A preset number appears in the front panel
display.
display.
6
Press
X
/
x
to select the preset number
you want.
7
Press ENTER.
The station is stored.
8
Repeat 1 to 7 to store other stations.
To change the preset number
Restart from Step 1.
Note
You cannot preset the service component while
“TUNED” is not displayed.
Before you can receive DAB, you must register
the contents of broadcasts (service components)
so that they can be received by the DAB tuner
using the DAB INITIAL SCAN procedure.
the contents of broadcasts (service components)
so that they can be received by the DAB tuner
using the DAB INITIAL SCAN procedure.
Before receiving DAB stations
(DAB INITIAL SCAN)
(DAB INITIAL SCAN)
DAB INITIAL SCAN starts automatically when
you select the “DAB” function for the first time
after you purchase the system or after you cancel
DAB INITIAL SCAN while scanning.
you select the “DAB” function for the first time
after you purchase the system or after you cancel
DAB INITIAL SCAN while scanning.
1
Make sure that the DAB wire antenna
(aerial) is connected to the ANTENNA
DAB 75
(aerial) is connected to the ANTENNA
DAB 75
Ω
jack on the rear of the unit
(page 13).
2
Make sure that the system turns on,
and then select the “DAB” function.
and then select the “DAB” function.
DAB INITIAL SCAN starts automatically.
When scanning is complete,
“COMPLETE” appears in the front panel
display momentarily and an available
service component list is created.
When scanning is complete,
“COMPLETE” appears in the front panel
display momentarily and an available
service component list is created.
Note
Before the DAB INITIAL SCAN procedure, make
sure to turn the volume to minimum.
If you move to another area, do the following to
perform DAB INITIAL SCAN again in order to
store the stations for your new area.
perform DAB INITIAL SCAN again in order to
store the stations for your new area.
1
Press FUNCTION repeatedly until
“DAB” appears in the front panel
display.
“DAB” appears in the front panel
display.
2
Press MENU.
3
Press
X
/
x
repeatedly until “INIT SCAN”
appears in the front panel display.
4
Press ENTER.
5
Press
X
/
x
repeatedly until “SCAN YES”
appears in the front panel display.
6
Press ENTER.
When scanning begins, “SCAN **”
appears in the front panel display (** refers
to a number of percent complete by 10%,
appears in the front panel display (** refers
to a number of percent complete by 10%,
Receiving DAB Stations
Listening to a
using a preset number
using a preset number
Preset DAB radio stations in the system’s
memory first (see “Presetting DAB stations”
(page 53)).
memory first (see “Presetting DAB stations”
(page 53)).
1
Press FUNCTION repeatedly until
“DAB” appears in the front panel
display.
“DAB” appears in the front panel
display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station you want.
select the preset station you want.
Each time you press the button, the system
tunes in one preset station. You can also
select the number by pressing the number
buttons. Press the number buttons, and then
press ENTER.
tunes in one preset station. You can also
select the number by pressing the number
buttons. Press the number buttons, and then
press ENTER.
3
Adjust the volume by pressing
VOLUME +/–.
VOLUME +/–.
Note
If there is no stored preset station, or no registered
preset number, “NO PRESET” appears in the front
panel display.
panel display.
Primary service is automatically received when
secondary service ends.
Viewing the DAB station
information in the front panel
display
information in the front panel
display
Press DISPLAY repeatedly.
Each time you press DISPLAY while tuning in
a DAB station, the display changes 1 t 2 t
... t 1 t ...
1
a DAB station, the display changes 1 t 2 t
... t 1 t ...
1
Service component label
2
Dynamic label segment
1)
3
Channel label and frequency
2)
4
Preset number
2)3)
1)
If a station does not provide the Dynamic label
segment, “NO TEXT” is displayed.
2)
Returns to the service component label after about 4
seconds.
3)
If the currently received station is not preset, this is
skipped.
Note
If tuning a DAB station, the following appears in the
front panel display:
– “OTHER LANG” is displayed when the system
does not support the language.
– All text is displayed in capital letters.
– A character which cannot be displayed is replaced
by a blank space.
When “ST” appears in the front panel display, the
current program is broadcasted in the stereo/joint
(intensity) stereo mode.
(intensity) stereo mode.
11
HCD-DZ210D
Remote control
AMP MENU wg (19, 26, 55, 57,
90)
ANGLE 5 (42)
AUDIO 4 (38)
CLEAR ef (32, 55, 66)
D.TUNING wf (50)
DISC SKIP* qk
DISPLAY 3 (40, 51)
DYNAMIC BASS wd (56)
ENTER qd (16, 19, 26, 32, 50,
58)
FUNCTION ws (22, 25, 26, 33,
50, 61)
MENU wh (38, 50)
MOVIE/MUSIC qj (28)
MUTING 7 (25)
Number buttons** qg (32, 50, 55,
58)
PICTURE NAVI 6 (33, 55)
PRESET +/– wk es (50, 54)
PROGRESSIVE eg (22)
SLEEP ql (57)
SOUND FIELD qh (29)
SUBTITLE wf (43)
THEATRE SYNC w; (56)
TOP MENU qf (38)
TUNING +/– 0 qs (50, 53)
TV e; (55)
TV CH +/– wa (55)
TV VOL +/– eh (55)
TV/VIDEO 2 (55)
VOLUME +/–** 8 (25, 50, 71)
[/1 (on/standby) 1 (16, 19, 25,
33, 50)
TV [/1 (on/standby) ej (55)
C/X/x/c qd (16, 19, 26, 32, 50,
58)
REPLAY/
ADVANCE 9 (25)
./> es wk (25)
m/M qs 0 (31)
m/M qs 0 (31)
/
SLOW qs 0 (31)
H (play)** ea (25, 33, 59)
STEP 9 (31)
x (stop) wl (25, 33, 58)
X (pause) qa (25)
X (pause) qa (25)
DISPLAY wj (18, 32, 58, 86)
O RETURN ed (33)
-/-- ef (55)
* The DISC SKIP button is not
available for this model.
** The H, number 5, and
VOLUME + buttons have
tactile dots. Use the tactile dots
as references when operating
the system.
tactile dots. Use the tactile dots
as references when operating
the system.
ALPHABETICAL ORDER
A – O
P – Z
BUTTON DESCRIPTIONS
12
HCD-DZ210D
SECTION 3
DISASSEMBLY
3-1. DISASSEMBLY FLOW
•
This set can be disassembled in the order shown below.
3-3. FL BOARD
(Page 14)
3-4. JACK BOARD,
DDCON BOARD
(Page 14)
3-10. DVD MECHANISM DECK
(CDM85-DVBU102)
(Page 17)
3-11. TRAY
(Page 18)
3-12. BELT, MS-203 BOARD
(Page 18)
3-13. OPTICAL PICK-UP
(KHM-310CAA)
(Page 19)
3-6. MAIN BOARD
(Page 15)
3-5. I/O BOARD,
SPEAKER BOARD
(Page 15)
3-8. DC FAN, TUNER UNIT
(Page 16)
3-9. POWER BOARD
(Page 17)
3-7. JOINT BOARD
(Page 16)
3-2. CASE, FRONT PANEL ASSY
(Page 13)
SET
Click on the first or last page to see other HCD-DZ210D service manuals if exist.