DOWNLOAD Sony HCD-DZ210D Service Manual ↓ Size: 9.28 MB | Pages: 82 in PDF or view online for FREE

17

6

seven screws

     (+BV 3 

×

 8)

When re-assembling, attach the 
heat radiation sheets on the 
chassis, and then install the 
POWER board. 

radiation sheets

5

connector

    (CN901)

4

connector

    (CN3002)

3

connector

    (CN515)

7

POWER board

1

two screws 

     (+BV 3 

×

 6)

2

cover (top)

When re-assembling, leave 30 mm between 
harnesses A and B for safety. 

harnesses A

harnesses B

clamp

30mm

After twist the harness once, 
install the connector.

POWER board

MAIN board

1

 two screws 

      (+BV 3 

×

 6)

qs

 DVD mechanism deck

     (CDM85-DVBU102)

9

cover (MD)

2

cover (top)

6

sheet

7

Remove the wire and harness.

q;

three screws (+BV 3 

×

 6)

8

three screws (+BV 3 

×

 6)

3

wire (flat type) 23core

     (CN1101)

5

wire (flat type) 5core

     (CN1202)

qa

wire (flat type) 5core

4

connector (CN1201)

18

4

2

3

two claws

5

tray

1

Move the chuck cam 
in the direction of the arrow.

bottom side

1

two claws

5

three claws

7

 MS-203 board

6

 DC motor

3

 belt

2

 chuck cam

4

screw
(M 1.7 

×

 2.5) 

19

1

two claws

3

two claws

2

 chuck cam

4

 base unit 

5

two claws

7

bu holder

8

two insulators 

9

two insulators

6

four insulator screws

0

optical pick-up 

     (KHM-310CAA) 

20

Regarding the notification symbol “R”
Because the number of the operating buttons of this product
are limited, some operations require use of the operating
buttons of the remote commander, When a specific operation
requires use of the operating buttons of the remote
commander, “R” is added to the specific operating procedure
in this manual. Example  MENU/NO  “R”  The  MENU/NO
button of remote commander.

Incorrect operations may be performed if the test mode is
not entered properly.
In this case, press the  ?/1  button to turn the power off, and
retry to enter the test mode.

The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure :

1. Press the  ?/1  button to turn the set on.
2. Press the  FUNCTION  button to set DVD function.
3. Insert a disc.
4. Press the  

x  

button and the  A  button simultaneously for five

seconds.

5. The message “LOCKED” is displayed and the tray is locked.

1. Press the  

x  

button and the  A  button simultaneously for five

seconds again.

2. The message “UNLOCKED” is displayed and the tray is

unlocked.

When “LOCKED” is displayed, the slot lock is not released by
turning power on/off with the  ?/1  button.

•

Use this mode when returning the set to the customer after
repair.

1. Press the  ?/1  button to turn the set on.
2. Press the  FUNCTION  button to set the function “DVD”.
3. Remove all discs, and then press two buttons  x , and  .

simultaneously.

4. After a message “MECHA LOCK” is displayed on the

fluorescent indicator tube, pull out the AC plug.

5. To exit from this mode, press the  ?/1  button to turn the set on.

1. Press the  ?/1  button to turn the power on.
2. Press three buttons  . ,  H and  >  simultaneously.
3. The message “VOLUME MAX” is displayed, when the

VOLUME  control is turned in the direction of (+).
The message “VOLUME MIN” is displayed, when the
VOLUME  control is turned in the direction of (–).

4. To exit from this mode, press the  ?/1  button to turn the set off.

This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the RAM
to initial conditions. Use this mode when returning the set to the
customer after repair.
Procedure:

1. Press the  ?/1  button to turn the power on.
2. Press the  FUNCTION  button to set the function “DVD”.
3. Remove all discs, and then press three buttons  > ,  A  and

?/1  simultaneously.

4. After the “STANDBY” blinking display finishes, the message

“MECHA LOCK” is displayed on the fluorescent indicator
tube disconnect the AC power plug, then the ship mode is set.

•

The cold reset clears all data including preset data stored in
the RAM to initial conditions. Execute this mode when
returning the set to the customers.

1. Press the  ?/1  button to turn the power on.
2. Press three buttons  x  ,   A  and   ?/1  simultaneously.
3. When this button is operated, display as “COLD RESET” for

a while and all of the settings are reset.

•

This mode is used to check the software version, FL, LED
and KEY.

1. Press the  ?/1  button to turn the power on.
2. Press three buttons  X ,  . and  A  simultaneously.
3. When the display test mode is activated, all segments and LEDs

are turned on.

4. To exit from this mode, press three buttons  X ,  . and  A

simultaneously.

1. When the panel test mode is activated, press the  .  button

and the message “DSX1-DAB” is displayed, the version test
mode is activated.

2. Whenever the  .  button is pressed, the display changes in

the following order.

*1: EC changes depending on destination.

3. Press the  >  button and the date of the software production

is displayed.

4. Press the  >  button again and the version is displayed.
5. To exit from this mode, press three buttons  X ,  .  and  A

simultaneously.

1. When the panel test mode is activated, press the  H  button,

to select the key test mode.

2. To enter the KEY test mode, the fluorescent indicator displays

“K0 V0”. Each time a button is pressed, “KEY” value
increases. However, once a button is pressed, it is no longer
taken into account. When all keys are pressed correctly, “K8
V0” is displayed.

3. When the  VOLUME  control is turned in the direction of (+),

“V0” is changed to “V1”, then ... “V9”.
When the  VOLUME  control is turned in the direction of (–),
“V0” is changed to “V9”, then ... “V1”.

4. To exit from this mode, press three buttons  X ,  . and  A

simultaneously.

“DSXV” (Model name) t “EC

*1

” (Destination) t MC

DAB T TM T DSP T TA T ST T DVD T UI T SYS