DOWNLOAD Sony HCD-CP300 Service Manual ↓ Size: 9.78 MB | Pages: 55 in PDF or view online for FREE

11

1

×

2

3

5

×

2

×

1

7

3

3

8

4

4

6

9

12

3

×

7

×

9

8

1

4

5

2

6

2

×

6

5

3

4

1

×

13

3

×

1

×

7

8

4

2

6

5

3

A

1

×

2

×

5

4

A

A

14

[CD Ship Mode]
• This mode moves the optical pick-up to the position durable to

vibration. Use this mode when returning the set to the customer
after repair.

Procedure:
1. Press ?/1 button to turn the set ON.
2. Press three buttons x (TAPE A), x (CD), and Z (CD1)

simultaneously.

3. After the “STANDBY” display blinks six times, a message

“LOCK” is displayed on the fluorescent indicator tube, and the
CD ship mode is set.

[GC Test  Mode]
• This mode is used to check the software version, FL tube, LED,

keyboard and VACS.

Procedure:
1. Press three buttons ?/1 , x (TAPE A), and  x  (CD) simul-

taneously.

2. LEDs and fluorescent indicator tube are all turned on.
3. When you want to enter the software version display mode,

press  CD 1 .  The model number and destination are displayed.

4. Each time  CD 1  is pressed, the display changes starting from

MC version, GC version, CD version, CDD version, CDM
version, BD version, ST version, TA version, TM version, TC
version and MD version in this order.

5. Press  CD 2  button, and the key check mode is activated.
6. In the key check mode, the fluorescent indicator tube displays

“K 

0

  J 0  V 0”.  Each time a button is pressed, “K 0” value

increases. However, once a button is pressed, it is no longer
taken into account.
“V  0” value increases like 1, 2, 3 ... if rotating  VOLUME  knob
in “+”  direction, or it decreases like 0, 9, 8 ... if rotating in
“–” direction.

7. To exit from this mode, press three buttons in the same manner

as step 1, or disconnect the power cord.

[CD Service Mode]
• This mode can run the CD sled motor freely. Use this mode, for

instance, when cleaning the optical pick-up.

Procedure:
1. Press ?/1 button to turn the set ON.
2. Select the function “CD”.
3. Press three buttons x (TAPE A), x (CD), and  CD 2  simulta-

neously.

4. The CD service mode is selected.
5. With the CD in stop status, turn the shuttle knob clockwise to

move the optical pick-up to outside track, or turn the shuttle
knob counter-clockwise to inside track.

6. To exit from this mode, perform as follows:

1) Move the optical pick-up to the most inside track.
2) Press three buttons in the same manner as step 2.

Note: • Always move the optical pick-up to most inside track when exit-

ing from this mode.  Otherwise, a disc will not be unloaded.

• Do not run the sled motor excessively, otherwise the gear can be

chipped.

[CD Ship (Memory Clear) Mode]
• Set the CD ship mode and set the default setup when shipped

from the factory at the next AC power on.

Procedure:
1. Press  ?/1  button to turn the set ON.
2. Select the function  “CD ”.
3. Press three buttons x (TAPE A), x (CD), and Z (CD1)

simultaneously.

4. After the “STANDBY” display blinks six times, a message

“LOCK” is displayed on the fluorescent indicator tube, and the
CD ship mode is set.