DOWNLOAD Sony DHC-FLX9W / HCD-FLX9W Service Manual ↓ Size: 12.54 MB | Pages: 127 in PDF or view online for FREE

21

• This set can be assembled in the order shown below.

4-4. STOCKER SECTION INSTALLATION

(Page 22)

4-3. SLIDER (SELECTION) INSTALLATION

(Page 22)

4-2. GEARS INSTALLATION

(Page 21)

4-5. CHASSIS (MOLD B) SECTION 

INSTALLATION (Page 23)

1

Slide the slider (u/d)
fully in the arrow 
direction.

3

gear (gear B)

2

gear (U/D slider)

4

gear (gear A)

portion A

Adjust the gear (gear B) with the 
portion A as shown.

slider (U/D) gear

Adjust the gear so that it meshes with
the bottom tooth of slider (U/D) gear,
as shown.

gear
(gear B)

linearly

Adjust so as to be aligned with
gear B linearly, as shown.

Follow the assembly procedure in the numerical order given.

22

2

portion A of tray (sub)

1

stocker section

3

two step screws

3

two step screws

Hook the portion A of tray (sub)
to the slider (selection).

portion A
of tray (sub)

sticking of 
slider (selection)

2

gear (chuking)

6

two screws 
(PTPWH M2.6)

5

washer

3

convex portion of
slider (selection)

4

compression spring

7

Insert the slider (selection)

 

into the portion A.

1

rotary encoder

rotary encoder

Align with the slot of
rotary encoder.

align marking

portion A

gear (chuking)

Insert a convex portion into
a groove of gear (chuking).

23

3

three screws 
(BVTP M2.6)

2

Insert the gear (eject)
under the gear (LD 
deceleration).

1

Insert the portion A of
chassis (mold B) section
into the portion B of 
slider (selection).

gear (LD deceleration)

portion A

portion B of
slider (selection)

24

• The cold reset clears all data including preset data stored in

the RAM to initial conditions. Execute this mode when
returning the set to the customer.

1. Press three buttons 

x 

,  [DISPLAY], and [GROOVE]

simultaneously.

2. The fluorescent indicator tube becomes blank instantaneously,

and the set is reset.

(Except FLX5D: Saudi Arabia/FLX7D: Saudi Arabia models)

• A step of AM channels can be changed over between 9 kHz

and 10 kHz.

1. Press the

I/

1

button to turn the power on.

2. Select the function “TUNER”, and press [TUNER/BAND]

button to select the BAND “AM”.

3. Press the

I/

1

button to turn the set OFF.

4. Press

M

 + and

I/

1

buttons simultaneously, and the display

of fluorescent indicator tube changes to “AM 9 K Step” or
“AM 10 K Step”, and thus the channel step is changed over.

• Select either VIDEO or MD of the external function input.

1. Press the

I/

1

button to turn the power on.

2. Hold down [VIDEO/SAT]  button then press

I/

1

button, and

release

I/

1

button first in order not in switch off the set

immediately.

The another function of the previous function is selected, the

input level is also changed and displayed “SAT” or “VIDEO”.

• This mode is used to check the software version, FL tube,

LED, keyboard and VACS.

1. Press three buttons

  x 

,  [DISPLAY],  and  [EFFECT]

simultaneously.

2. LEDs and fluorescent indicator tube are all turned on.
3. When you want to enter the software version display mode,

press  [GROOVE]. The model number and destination are
displayed.

4. Each time [GROOVE] is pressed, the display changes stating

from MC version, GC version, DP version, DVD version,
CDDM, CDMA, CDMB, BDA, BDB, ST version, TA version,
TM version, TC version, in this order.

5. When [CD SYNC HI-DUB] is pressed while the version numbers

are being displayed except model number and destination, year,
month and day of the software creation appear. When [CD
SYNC HI-DUB]  is pressed again, the display returns to the
software version display. When [GROOVE] is pressed while
year, month and day of the software creation are being
displayed, the year, month and day of creation of the software
versions are displayed in the same order of version display.

6. Press [EFFECT] button, and the key check mode is activated.
7. In the key check mode, the fluorescent indicator tube displays

“KXX V0 C  T”. Each time a button is pressed, “K” value
decreases.

However, once a button is pressed, it is no longer taken into

account.

“V” value increases like 1, 2, 3...if rotating [VOLUME] knob in

the clockwise, or it decreases like 0, 9, 8...if rotating in the
counterclockwise.

Each time the “CD DOOR LOCK DETECT” or “CD DOOR

OPEN/CLOSE DETECT” switch is turned on, “C” value
increases.

Each time the “CASSETTE LID OPEN/CLOSE DETECT”

switch is pressed, “T” value increases.

8. Also when [GROOVE] is pressed after lighting of all LEDs

and fluorecsent indicator tube, value of VACS appears.

9. To exit from this mode, press three buttons in the same manner

as step 1, or disconnect the power cord.

• This mode is used to check operations of the respective sections

of Amplifier, Tuner, and Tape.

1. Press the

I/

1

button to turn the power on.

2. Press the three buttons of 

 x 

, [DISPLAY] and [CD SYNC HI-

DUB] simultaneously.

3. The segments blinks on the fluorescent indicator tube as bellow.

1. To release this mode, press the

I/

1

button.

2. The cold reset is enforced at the same time.

Input , DIGITAL
EQ

, FLAT

Mode , MUSIC
VACS , OFF

Output channel setting:
Each time the [EFFECT] button is pressed, output channels switch
as following order.

DIGITAL

EFFECT

Blink

Order

Channels

Bass Manage

VACS

*

1

1

L t L

Through

ON

R t R

2

L t L

Through

OFF

R t R

3

L t SL

Through

ON

R t SR

4

L t SL

Through

OFF

R t SR

5

L t L, C, SL

on

ON

R t R, SR, SW

6

L t L, C, SL

on

OFF

R t R, SR, SW

7

L t C

Through

ON

R t SW

8

L t C

Through

OFF

R t SW

*

1

) “EFFECT” indication