DOWNLOAD Sony DAV-TZ210 / DAV-TZ230 / DAV-TZ510 / DAV-TZ630 / DAV-TZ710 / HBD-TZ210 / HBD-TZ230 / HBD-TZ510 / HBD-TZ630 / HBD-TZ710 Service Manual ↓ Size: 3.84 MB | Pages: 80 in PDF or view online for FREE

2010E04-1

© 

2010.05

•  HBD-TZ210/TZ230/TZ510/TZ630/TZ710 are the amplifi er, 

DVD/CD and tuner section in DAV-TZ210/TZ230/TZ510/
TZ630/TZ710.

Model Name Using Similar Mechanism

HBD-DZ170/DZ171/DZ175/
DZ310/DZ510/DZ610/DZ810

Mechanism Type

CDM85MB-DVBU102

Optical Pick-up Name

KHM-313CAA

This system incorporates with Dolby* Digital and Dolby Pro Logic 
(II) adaptive matrix surround decoder and the DTS** Digital Surround 
System.
*  Manufactured under license from Dolby Laboratories.
 

Dolby, Pro Logic, and the double-D symbol are trademarks of 
Dolby Laboratories.

**  Manufactured under license under U.S. Patent #’s:
 

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other 
U.S. and worldwide patents issued & pending. DTS and DTS 
Digital Surround are registered trademarks and the DTS logos and 
Symbol are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All 
Rights Reserved.

– Continued on next page –

Photo: HBD-TZ210

POWER OUTPUT (rated):
Front L + Front R 

65 W + 65 W (at 3 ohms, 1

 kHz, 

1% 

THD)

POWER OUTPUT (reference):
 

Front L/Front R/Center/

 

Surround L/Surround R:

 

100 watts (per channel at 3

 

ohms, 1 kHz)

 

Subwoofer: 100 watts (at 3

 

ohms, 80 Hz)

Inputs (Analog)
Canadian model: 

TV/CABLE (AUDIO IN)

 

Sensitivity: 450/250 mV

Other models: 

TV (AUDIO IN)

 

Sensitivity: 450/250 mV

POWER OUTPUT (rated):
Front L + Front R 

65 W + 65 W (at 3 ohms, 1

 kHz, 

1% 

THD)

POWER OUTPUT (reference):
 

Front L/Front R/Center/

 

Surround L/Surround R:

 

100 watts (per channel at 3

 

ohms, 1 kHz)

 

Subwoofer: 100 watts (at 3

 

ohms, 80 Hz)

Inputs (Analog)
TV (AUDIO IN) 

Sensitivity: 450/250 mV

Laser Diode Properties 

Emission Duration:

 Continuous
 

Laser Output: Less than

 44.6 

μW

* This output is the value measurement at a distance
  of 200 mm from the objective lens surface on the
  Optical Pick-up Block with 7 mm aperture.

Signal format system
Mexican and Latin American models:
 NTSC
Other models: 

NTSC/PAL

Laser Diode Properties 

Emission Duration:

 Continuous
 

Laser Output: Less than

 44.6 

μW

* This output is the value measurement at a distance
  of 200 mm from the objective lens surface on the
  Optical Pick-up Block with 7 mm aperture.

Signal format system 

PAL/NTSC

 (USB) port:

Maximum current: 

500 mA

System 

PLL quartz-locked digital

 synthesizer
Tuning range
Canadian model: 

87.5 MHz - 108.0 MHz

 

(100 kHz step)

Other models:  

87.5 MHz - 108.0 MHz (50

 kHz 

step)

Antenna (aerial)  

FM wire antenna (aerial)

Antenna (aerial) terminals  75 ohms, unbalanced
Intermediate frequency  

10.7 MHz

Outputs 

VIDEO: 1 Vp-p 75 ohms

 

HDMI OUT: Type A (19

 pin)

Outputs  

VIDEO: 1 Vp-p 75 ohms

 

R/G/B: 0.7 Vp-p 75 ohms

 

HDMI OUT: Type A (19

 pin)

Power requirements
North American and Mexican models:
 

120 V AC, 60 Hz

Taiwan models:  

120 V AC, 50/60 Hz

Argentine models:  

220 V - 240 V AC, 50/60 Hz

Latin American models:   110 V - 240 V AC, 50/60 Hz
Saudi Arabian models:  

127 V - 240 V AC, 50/60 Hz

Other models:  

220 V - 240 V AC, 50/60 Hz

Power consumption  

On: 105 W

 Standby: 

0.2 

W*

Dimensions (approx.) 

430 mm 

× 67 mm × 335 mm 

 (17 

in 

× 2

 3/4

 in 

× 13

 1/4

 in) (w/h/d) 

 

incl. projecting parts

Mass (approx.)  

3.6 kg (7 lb 15 oz)

Power requirements  

220 V - 240 V AC, 50/60 Hz

Power consumption  

On: 105 W

 Standby: 

0.2 

W*

Dimensions (approx.)  

430 mm 

× 67 mm × 335 mm (w/h/d) 

 

incl. projecting parts

Mass (approx.)  

3.6 kg

File Extension:  

mp3

Bitrate:  

32 kbps - 320 kbps

Sampling frequencies:  

32/44.1/48 kHz

File Extension:  

wma

Bitrate:  

48 kbps - 192 kbps

Sampling frequencies:  

44.1 kHz

File Extension:  

m4a

Bitrate:  

48 kbps - 320 kbps

Sampling frequencies:  

44.1 kHz

File Extension:  

avi/divx

Video codec:  

DivX video

Bitrate:  

10.08 Mbps (MAX)

Frame rate:  

30 fps

Resolution:  

720 

× 576

Audio codec:  

MP3

File format:  

MP4 File Format

File Extension:  

mp4/m4v

Video codec:  

MPEG4 Simple Profi le

 

(AVC is not compatible.)

Bitrate:  

4 Mbps

Frame rate:  

30 fps

Resolution:  

720 

× 576

Audio codec:  

AAC-LC (HE-AAC is not compatible.)

DRM:  

Not compatible

Design and specifi cations are subject to change without notice.

SPECIAL  COMPONENT  NOTICE
The components identifi ed by mark 9 contain confi dential infor-
mation.
Strictly follow the instructions whenever the components are re-
paired and/or replaced.

COMPONENTS  IDENTIFIED  BY  MARK  0  OR  DOTTED  LINE  
WITH  MARK  0  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 

LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  0  SUR  
LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  
PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ  DE  FONC-
TIONNEMENT.  NE  REMPLACER  CES  COMPOSANTS  QUE  
PAR  DES  PIÈCES  SONY  DONT  LES  NUMÉROS  SONT  DON-
NÉS  DANS  CE  MANUEL  OU  DANS  LES  SUPPLÉMENTS  
PUBLIÉS  PAR  SONY.

NOTICE  POUR  COMPOSANTS  SPÉCIAUX
Les composants identifi és par la marque 9 contiennent des infor-
mations confi dentielles.
Suivre scrupuleusement les instructions chaque fois qu’un compo-
sant est remplacé et / ou réparé.

UNLEADED  SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution:  Some printed circuit boards may not come printed with 

the lead free mark due to their particular size)

Unleaded solder has the following characteristics.
•  Unleaded solder melts at a temperature about 40 °C higher 

than ordinary solder.

 

Ordinary soldering irons can be used but the iron tip has to be 
applied to the solder joint for a slightly longer time.

 

Soldering irons using a temperature regulator should be set to 
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if 

the heated tip is applied for too long, so be careful!

• Strong 

viscosity

 

Unleaded solder is more viscous (sticky, less prone to fl ow) 
than ordinary solder so use caution not to let solder bridges 
occur such as on IC pins, etc.

•  Usable with ordinary solder
 

It is best to use only unleaded solder but unleaded solder may 
also be added to ordinary solder.

NOTES  ON  CHIP  COMPONENT  REPLACEMENT
•  Never reuse a disconnected chip component.
•  Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

FLEXIBLE  CIRCUIT  BOARD  REPAIRING
•  Keep the temperature of soldering iron around 270 °C during 

repairing.

•  Do not touch the soldering iron on the same conductor of the 

circuit board (within 3 times).

•  Be careful not to apply force on the conductor when soldering 

or unsoldering.

Laser component in this product is capable of emitting radiation 
exceeding the limit for Class 1.

This appliance is classifi ed as 
a CLASS 1 LASER product.
This marking is located on the 
rear or bottom exterior.

CAUTION
Use of controls or adjustments or performance of procedures 
other than those specifi ed herein may result in hazardous radia-
tion exposure.

• Abbreviation
 AR  : 

Argentina 

model

 AUS : 

Australian 

model

  CH 

: Chinese model

  CND  : Canadian model
  E3 

: 240V AC area in E model

  E12 

: 220 – 240V AC area in E model

  E32 

: 110 – 240V AC area in E model

  EA 

: Saudi Arabia model

  HK 

: Hong Kong model

  MX 

: Mexican model

  PH 

: Philippines model

  RU 

: Russian model

  SAF  : South African model
  SP 

: Singapore model

 TH  : 

Thai 

model

 TW  : 

Taiwan 

model

TZ210: CND model

4-161-835-0[]

TZ230: AEP, UK models

4-161-835-1[]

TZ210: E12 model

4-161-835-2[]

TZ210: E3, SAF models

4-161-835-3[]

TZ210: EA model

4-161-835-4[]

TZ210: SP model

4-161-835-5[]

TZ210: PH model

4-161-835-6[]

TZ210: HK model

4-161-835-7[]

TZ210: AUS model

4-161-835-8[]

TZ210: TH model

4-161-835-9[]

TZ210: RU model

4-161-836-0[]

TZ210: E32 model

4-161-836-1[]

TZ210: MX model

4-161-836-2[]

TZ210: AR model

4-161-836-4[]

TZ510: CND model

4-161-836-5[]

TZ510: SP model

4-161-836-6[]

TZ510: E32 model

4-161-836-7[]

TZ510: MX model

4-161-836-8[]

TZ510: SAF model

4-161-836-9[]

TZ630: AEP model

4-161-837-0[]

TZ710: E3 model

4-161-837-1[]

TZ710: RU model

4-161-837-2[]

TZ710: CH model

4-161-837-3[]

TZ710: HK model

4-161-837-5[]

TZ710: MX model

4-161-837-6[]

TZ710: TH model

4-161-837-7[]

TZ510: TH model

4-161-837-8[]

TZ510: TW model

4-161-837-9[]

When the self-diagnosis function is activated to 
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a 
combination of a letter and 4 digits appears on 
the TV screen or front panel display. In this case, 
check the following table.

When the version number 

appears on the TV screen

When you turn on the system, the version 
number [VER.X.XX] (X is a number) may 
appear on the TV screen. Although this is not a 
malfunction and for Sony service use only, 
normal system operation will not be possible. 
Turn off the system, and then turn on the system 
again to operate.

Self-diagnosis Function 

C 13

The disc is dirty.
,Clean the disc with a soft cloth 

(page 63).

E XX

(XX is a 
number)

To prevent a malfunction, the 
system has performed the self-
diagnosis function.
,Contact your nearest Sony 

dealer or local authorized Sony 
service facility and give the 5-
character service number.

Example: E 61 10

C:13:50

VER.X.XX