Sony DAV-SA35K / HCD-SA35K Service Manual ▷ View online
21
HCD-SA35K
• Code list of Emergency History
10: Communication to RF AMP (IC001) failed.
11: Each servo for focus, tracking, and spindle is unlocked.
12: Check sum error of EEPROM (IC204).
14: Communication to servo DSP (IC509) failed, or servo DSP
11: Each servo for focus, tracking, and spindle is unlocked.
12: Check sum error of EEPROM (IC204).
14: Communication to servo DSP (IC509) failed, or servo DSP
(IC509) is faulty.
15: Communication to DVD decoder (IC701) failed, or DVD
decoder (IC701) is faulty.
16: Communication to DSD decoder (IC801) failed, or DSD
decoder (IC801) is faulty.
20: Initialization of sled servo failed. It is not placed in the ini-
tial position.
23: Sled servo operation error.
24: Made a request to move the sled servo to wrong position.
30: Tracking balance adjustment error.
31: Tracking gain adjustment error.
33: Focus bias adjustment error.
34: Focus gain adjustment error.
35: Equalizer adjustment error.
40: Focus servo does not operate.
41: With a DVD dual layer disc, focus jump failed.
50: CLV (spindle) servo does not operate.
51: Spindle does not stop.
60: Made a request to seek nonexistent address.
61: Seek error of retry more than regulated times.
70: Control data could not be read.
80: Disc reading failed.
24: Made a request to move the sled servo to wrong position.
30: Tracking balance adjustment error.
31: Tracking gain adjustment error.
33: Focus bias adjustment error.
34: Focus gain adjustment error.
35: Equalizer adjustment error.
40: Focus servo does not operate.
41: With a DVD dual layer disc, focus jump failed.
50: CLV (spindle) servo does not operate.
51: Spindle does not stop.
60: Made a request to seek nonexistent address.
61: Seek error of retry more than regulated times.
70: Control data could not be read.
80: Disc reading failed.
5.
MECHA ERROR HISTORY
On the Test Mode Menu screen, selecting
[5]
displays the information
of mechanism deck error history.
The history information from last 1 up to 8 can be scrolled with
the O key or o key. Also, specific information can be displayed
by directly entering that number with ten keys.
The history information from last 1 up to 8 can be scrolled with
the O key or o key. Also, specific information can be displayed
by directly entering that number with ten keys.
### Mecha Error History ###
1. aa bb cc xx xx xx xx xx
2. aa bb cc xx xx xx xx xx
3. aa bb cc xx xx xx xx xx
4. aa bb cc xx xx xx xx xx
5. aa bb cc xx xx xx xx xx
6. aa bb cc xx xx xx xx xx
7. aa bb cc xx xx xx xx xx
8. aa bb cc xx xx xx xx xx
Scroll:UP/DOWN
(1.Latest Err.)
Exit: RETURN
aa: Initialization is completed or not.
FF
: Complete.
other number : Not complete.
bb: Operating status of mechanism deck at an error occurred.
(lod sq jcp)
00
00
: Initializing.
10 to 15 : Open operating.
16 to 19 : Kicking cause open failed.
1A to 1F : Open operating.
20 to 27 : Complete the open operation.
28
16 to 19 : Kicking cause open failed.
1A to 1F : Open operating.
20 to 27 : Complete the open operation.
28
: No disc and complete the open operation.
29 to 2F : Complete the open operation.
30 to 3F : Close requesting.
40 to 4F : Open requesting.
50 to 5F : Close operating.
60 to 6F : Complete the chucking operation.
80 to 8F : Complete the release operation.
30 to 3F : Close requesting.
40 to 4F : Open requesting.
50 to 5F : Close operating.
60 to 6F : Complete the chucking operation.
80 to 8F : Complete the release operation.
(BU is home position)
90 to 9F : BU down operating.
A0 to AF : Opening/closing the shutter. Or stationary state in
A0 to AF : Opening/closing the shutter. Or stationary state in
open/close the shutter is enablement.
B0 to BF : BU up requesting.
C0 to CF : BU down requesting.
D0 to DF : BU upping.
E0 to EF : No disc checking in disc loading.
C0 to CF : BU down requesting.
D0 to DF : BU upping.
E0 to EF : No disc checking in disc loading.
cc: Operating status of mechanism deck at an error occurred.
(lod oq jcp)
00
00
: Complete the operation.
10 to 1F : Open operating.
20 to 2F : Close operating.
30 to 3F : Release operating.
60 to 6F : Chucking operating.
70 to 7F : Kicking operating.
80 to 8F : Returning the BU to home position. (after kicking)
20 to 2F : Close operating.
30 to 3F : Release operating.
60 to 6F : Chucking operating.
70 to 7F : Kicking operating.
80 to 8F : Returning the BU to home position. (after kicking)
22
HCD-SA35K
6.
VERSION INFORMATION
On the Test Mode Menu screen, selecting
[6]
displays the ROM
version and region code.
The parenthesized hexadecimal number in version field is checksum
value of ROM.
The parenthesized hexadecimal number in version field is checksum
value of ROM.
## Version Information ##
IF con.
Ver.x. xx
SYScon.
Ver.x. xx (xxxx)
Model
DAV-SAXXX
Region
0x
Config
xxxxxxxx
Front End Ver.x.xx
Exit: RETURN
IF con.
: The version of system controller (IC501).
SYScon. : The version of DVD system processor (IC207).
Front End: The version of mechanism controller (IC901).
Front End: The version of mechanism controller (IC901).
7.
VIDEO LEVEL ADJUSTMENT
On the Test Mode Menu screen, selecting
[7]
displays color bars
for video level adjustment. During display of color bars, OSD
disappears but the menu screen will be restored if pressing the
disappears but the menu screen will be restored if pressing the
[RETURN]
key.
23
23
HCD-SA35K
For schematic diagrams.
Note:
• All capacitors are in
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F
50 WV or less are not indicated except for electrolytics
and tantalums.
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
f
: internal component.
•
C
: panel designation.
For printed wiring boards.
Note:
• X
: parts extracted from the component side.
•
a
: Through hole.
• b
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
•
A
: B+ Line.
•
B
: B– Line.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
• Voltages and waveforms are dc with respect to ground in
service mode.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
no mark : STOP
tion tolerances.
no mark : STOP
*
: Impossible to measure
• Circled numbers refer to waveforms.
• Signal path.
F
: AUDIO
J
: CD PLAY
c
: DVD PLAY
d
: TUNER
L
: VIDEO
E
: Y
q
: R, G, B
e
: AUX IN
I
: SACD PLAY
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(SIDE A)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(SIDE B)
the parts face are indicated.
SECTION 5
DIAGRAMS
5-1. Circuit Board Location
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
(In addition to this, the necessary note is printed in each block.)
Note: The components identified by mark
0
or dotted line
with mark
0
are critical for safety.
Replace only with part number specified.
FRONT board
HP board
MS-128 board
UCOM board
STANDBY board
I/O board
RF board
AMP board
DMB03 board
POWER board
COMPONENT board
TUNER
• Indication of transistor
C E
B
These are omitted
Q
C
E
B
These are omitted
B
These are omitted.
C
E
Q
24
24
HCD-SA35K
5-2. Block Diagrams — RF/SERVO Section —
• SIGNAL PATH
: CD PLAY
: DVD PLAY
: SACD PLAY
: VIDEO
: AUDIO
DETECTOR
1
63
3
4
5
6
9
10
11
12
14
15
16
13
18
17
62
61
53
52
54
55
59
60
DVDRFP
RFSIN
A2
B2
C2
D2
CD E
CD F
A
B
C
D
C
D
B
A
D
D
C
B
A
D
D
C
CD A
CD B
CD C
CD C
CD D
CDLD
CDPD
DVDLD
V125
DVDPD
ATOP
ATON
FNP
FNN
AIP
AIN
DIP
DIN
57
27
40
39
47
46
48
IC001
CD/DVD/SACD RF AMP,
FOCUS/TRACKING ERROR AMP
OPTICAL PICK-UP
BLOCK
(DBU-1)
2AXIS
DEVICE
FOCUS/
FOCUS/
TRACKING
COIL
22
24
21
23
36
48
37
1
Q001
AUTOMATIC POWER
CONTROL (FOR DVD)
Q002
AUTOMATIC POWER
CONTROL (FOR CD)
Q901
LASER DIODE
SELECT
LASER
DIODE
(FOR CD)
LASER
DIODE
(FOR DVD)
FOCUS COIL
DRIVE
34
3
35
4
TRACKING COIL
DRIVE
32
31
33
34
20
22
19
8
40
41
39
43
31
32
29
30
SLED MOTOR
DRIVE
IC501
FOCUS/TRACKING COIL DRIVER,
SPINDLE, SLED MOTOR DRIVER
27
28
SPINDLE MOTOR
DRIVE
M
M
M1
(SPINDLE)
19
47
46
45
FFDR
FRDR
TFDR
TRDR
SFDR
SRDR
SLED_A
SLED_B
SLED
26
SE
TE
FE
RFDC
IC509
CD DECODER,
DIGITAL SERVO PROCESSOR
MIRR
FF
FR
FOK
COUT
SCLK
RF
A
B
C
D
F
E
CD LD
PD
DVD LD
FCS+
FCS–
TRK+
TRK–
SW
INLIM
D
C
B
A
RFAC
MIRR
DATA_RF
CLK_RF
SDEN
TE
FE
PI
TE
FE
PI
PI
FE
TE
SDATA
SCLK
SDEN
LDON
FCS_JMP_2
FCS_JMP_1
50 RFAC
30
29
SLED MOTOR
DRIVE
M
M
M2
(SLED)
40
42
36
42
MNTR
BUFFER
MUTE12
20
MUTE34
21
MUTE5
22
TSD-M
13
7
10
43
FG
62
MUTE_2D
60
SP_ON
63
TSD-M
73
39
POWER SAVE
A8
97
BUFFER
IC901 (1/2)
MECHANISM
CONTROLLER
61
7
LD_ON
28
INLIM
LDSEL
76
31
SDEN
2
FE
67
PI
66
COUT_CD
30
SDA
5
SCL
6
WP
7
15
SCOR
66
PCMD
67
BCK
65
LRCK
14
C2PO
17
WDCK
10
WFCK
80
EXCK
79
SBSO
BCLK
LRCK
C2PO
GSCOR
WFCK
EXCK
27M
768FS
SBSO
25
MDP
SCOR
SCOR
26
24
LOCK
LOCK_CD
75
13
GFS
GFS_CD
71
3
MUTE
MUTE_CD
59
7
SENS
SENS_CD
9
76
SQSO
SQSO
52
SCLK_CD
72
4
DATA
DATA_CD
49
63
MD2
71
XTAI
DOCTR/
ISBTEST
ISBTEST
3
77
SQCK
85
XRD
XRD
17
58
GFS_DVD
GFS
107
45
109
SCK_DSD
4
XRST_2753
AEP0
64
JIT
77
SACD/DVD
84
XWR
XWR
18
12
XCS_DVD
XCS
19
25
XRST_1882
XRST
164
22
INT0_DVD
XINT0
20
23
INT1_DVD
XINT1
21
SQCK
54
2
XRST
XDRST
98
6
CLOK
CLOK_CD
50
5
XLAT
LAT_CD
27
FOK_CD
74
MIRR
29
TE
65
SDCLK_RF
82
SDATA_RF
83
44
38
42
VC
CE
26 SSTP
AVC
(1.65V)
MIRR
MIRR
DATA_RF
CLK_RF
SDEN
TE
FE
PI
26
HDB8
49
XHRD
93
MNT2
48
XHWR
46
HDRQ
53
XHAC
92
MNT1
17 WE
76
XMWR
33 OE
94
XMOE
18 RAS
78
XRAS
34 UCAS
95
XCAS
117 RFIN
135 SPO
137 MDIN2
170 XTL1
169 XTL2
167 XTAL
IC701
DVD DECODER
IC706
16Mbit
D-RAM
160 MDAT
158 BCLK
163 LRCK
155 C2PO
146 GSCOR
163 LRCK
155 C2PO
146 GSCOR
HDB0 – HDB7
MDB0 – MDB9,
MDBA – MDBF
I/O0 – I/O15
A0 – A9
151 WFCK
147 EXCK
148 SBIN
BCLK
LRCK
C2PO
GSCOR
WFCK
EXCK
SCOR
SBSO
150 SCOR
IC703 (2/2)
BUFFER
IC703 (1/2)
COMPARATOR
IC906
CLOCK
GENERATOR
66-69, 71, 73-75, 96, 97,
99, 101, 102, 104-106
2-5, 7-10,
41-44, 46-49
44, 41, 39, 35,
32, 30, 27, 24
21-24,
27-32
MA0 – MA9
79, 80, 82-87,
89, 91
35 LCAS
TF
8
TR
FF
FR
FF
FR
TF
TR
7
8
XTI
XTO
D0 – D7
D0 – D7
9 10
SO1
SO2
13 3
SO3
MO1
X902
27MHz
14-21
172-176, 1, 2, 4
A0 – A7
A0 – A7
89-96
5, 7, 9-14
RF_AC
A
AUDIO
SECTION
AUDIO
SECTION
AUDIO
SECTION
AUDIO
SECTION
AUDIO
SECTION
AUDIO
SECTION
VIDEO
SECTION
VIDEO
SECTION
VIDEO
SECTION
VIDEO
SECTION
SD0 – SD7
B
XSRQ
H
XSRQ-ZIVA
I
J
WCK
D
XRST_DSD
G
768FS
F
27M
E
XDCK, XSAK, SDEF, XSHD
XDCK
XSAK
SDEF
XSHD
C
5
SDA_EEP
99
SCL_EEP 100
WP_EEP
47
SDIN_DSD
46
SDOUT_DSD
24
MSCK_SAMBA
51
XMSLAT
48
READY_DSD
53
MUTE_DSD
MSDATO
ISBTEST
MSDATO, MSDATI, MSCK, XMSLAT,
SHRRDY, SHRMUT, ISBTEST
MSDATI
MSCK
XMSLAT
SHRRDY
SHRMUT
6
MNT1
IC257
SACD/DVD
SELECT
IC903
EEPROM
IC503
AMP
8
Ver 1.2
Click on the first or last page to see other DAV-SA35K / HCD-SA35K service manuals if exist.