DOWNLOAD Sony DAV-S500 / DAV-S800 / HCD-S800 Service Manual ↓ Size: 12.41 MB | Pages: 100 in PDF or view online for FREE

9

3

 Connector (CN402)

4

 Flexible flat cable (9 core)

     (CN009)

2

 MD cover

5

 Flexible flat cable (25 core)

     (CN010)

7

 Two claws

1

 Two screws

     (DIA. 2.6 

×

 8)

6

 Screw

     (+BVTP 3 

×

 8)

8

 Mechanism deck 

     (CDM55D-DVBU8)

2

 Two screws

     (+BTP 2.6 

×

 6)

5

 Loading board

3

 Two solderings

4

 Motor (LD) assy (M901)

1

 Remove the belt 

     (CDM55)

10

3

 Two screws

     (+BTP 2.6 

×

 6)

4

 RF-240 board

1

 Flexible flat cable (25 core)

     (CN002)

2

 Flexible flat cable (26P)

     (CN001)

1

 While pushing the two protrusions, release the two claws fixing the tray

     and pull out the tray in the direction of the arrow 

A

. (Be carefull of the two claws.)

2

 Tray

A

11

1

 Floating screw (+PTPWHM 2.6)

2

 Flexible flat cable

     (9 core)

3

 Flexible flat cable

     (26 core)

4

 Step screw (L)

8

 Three insulators

9

 Optical pick-up

     (KHM-240AAA)

5

 Two step screws (M)

6

 Holder (KHM-240)

7

12

Procedure:
1.

Press the   A  button on the main unit or   1  button on the
remote commander to turn the set on.

2.

Press three buttons of  

FUNCTION 

,  .

  PREV

    and  A

simultaneously for two seconds.

3.

The message “VER. 1. ** ” is displayed for a moment.

Procedure:
1.

Press the  A   button on the main unit or  1  button on the
remote commander to turn the set on.

2.

Press three buttons of  

BAND 

,  x  and  A  simultaneously.

3.

The fluorescent indicator displays “JOG 0”. The value “JOG
0” increases like +1, +2, +3... if rotating the VOLUME knob
clockwisw,or it decreases like –1, –2, –3,.... if rotating counter-
clockwise.

4.

To exit from this mode, press the  

POWER

  button to turn the

set off.

Procedure:
1.

Press the  A    button on the main unit or  1    button on the
remote commander to turn the set on.

2.

Press three buttons of  

DISPLAY 

,  x  and  A  simultaneously.

3.

The message “KEY NUM 0” is displayed and “0” blinks.

4.

Each time a button is pressed, “KEY NUM 0” value increases.
However, once a button is pressed, it is no longer taken into
account.

5.

When all buttons are pressed, “KEY NUM 11” appears and
the number blinking is stopped.

6.

To exit from this mode, press the  

POWER 

 button to turn the

set off.

Procedure:
1.

Press the  A    button on the main unit or  1    button on the
remote commander to turn the set on.

2.

Press three buttons of 

 BAND 

,  X  and  A  simultaneously.

3.

All segments are turned on.

4.

When the  

NEXT

 >  button is pressed, the display will light

up as follows.

5.

Press the  

NEXT

 >  button, confirm the display.

6.

Press the  

NEXT

 >  button, all segments are turned off.

7.

Every pressing of the  

NEXT

  >    button turns on each

segments in the same order.

8.

To exit from this mode, press the  

POWER

  button to turn the

set off.

Procedure:
1.

Press the  A    button on the main unit or  1    button on the
remote commander to turn the set on.

2.

Set the  

FUNCTION

  to DVD.

3.

While pressing two buttons of  

DISPLAY

  and

 x  simultaneously, turn the VOLUME knob clockwise.

4.

The Test Mode Menu is displayed on the TV screen.

5.

To execute each function, select the number on the remote
commander.

6.

See the following section for explanation in detail.

7.

To exit from this mode, press the  

POWER

  button to turn the

set off.

Procedure:
1.

Press the  A    button on the main unit or  1    button on the
remote commander to turn the set on.

2.

Press two buttons of  

DISPLAY

  and  . 

PREV

simultaneously for two seconds.

3.

The message “LOCKED” is displayed and the tray is locked.
(Even if exiting from this mode, the tray is still locked.)

4.

Press two buttons of  

DISPLAY

  and  . 

PREV

 simultaneously for two seconds again.

5.

The message “UNLOCKED” is displayed and the tray is
unlocked.

6.

To exit from this mode, press the  

POWER

  button to turn the

set off.

The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).

Use the following test disc on test mode.
1) DVD reference disc

HLX-501 (J-6090-071-A) (dual layer)
HLX-503 (J-6090-069-A) (single layer)
HLX-504 (J-6090-088-A) (single layer)
HLX-505 (J-6090-089-A) (dual layer)

2) SACD reference disc

HLXA-509 (J-6090-090-A)

Do not use exiting test disc for DVD.

Set the FUNCTION to DVD with the main unit power on. Next,
while pushing the  x  button and the [DISPLAY] button on the main
unit at the same time, turn the VOLUME knob to the right to start
Test Mode and display the menu shown below on the TV screen. At
the bottom of the menu screen, the model name and revision number
are displayed.
To  execute each function, select the desired menu and press its
number on the remote commander. To exit from Test Mode, press
the [POWER] button.

Test Mode Menu

0. Syscon Diagnosis

1. Drive Auto Adjustment

2. Drive Manual Operation

3. Mecha Aging

4. Emergency History

5. Version Information

6. Video Level Adjustment

                Exit: POWER Key

_

Model

: HCX-1030_xx

Revision : 1.xxx

ALL 1 DISCS  AUTO

TITLE

TRACK

CHAPTER

INDEX

HTUNED

M MONO

ST S

dB  REPEAT  1
kHz  PROGRAM
MHz  SHUFFLE

PRO  LOGIC

DIGITAL  FM  AM

NTSC  PBC  ANGLE

D

D

D

D

dts PCM

ALL 1 DISCS  AUTO

TITLE

TRACK

CHAPTER

INDEX

HTUNED

M MONO

ST S

dB  REPEAT  1
kHz  PROGRAM
MHz  SHUFFLE

PRO  LOGIC

DIGITAL  FM  AM

NTSC  PBC  ANGLE

D

D

D

D

dts PCM