Sony DAV-HDX265 / DAV-HDX266 / DAV-HDX267W / DAV-HDX465 / DAV-HDX466 / DAV-HDX665 / HCD-HDX265 / HCD-HDX266 / HCD-HDX267W / HCD-HDX465 / HCD-HDX466 / HCD-HDX665 Service Manual ▷ View online
HCD-HDX265/HDX266/HDX267W/HDX465/HDX466/HDX665
17
3-13. MOTOR BOARD
3-12. TRAY (MAIN) ASSY
1
two screws
(BTTP M2.6)
2
two screws
(BTTP M2.6)
3
bracket (top)
4
5
tray (main) assy
1
screw
(BTTP M2.6)
2
bracket
3
screw
(BTTP M2.6)
4
MOTOR board
5
Remove two solders.
6
motor (81) assy (LD/ST motor)
(M761)
7
Remove two solders.
8
motor (81) assy (BU U/D motor)
(M762 )
HCD-HDX265/HDX266/HDX267W/HDX465/HDX466/HDX665
18
3-15. OPTICAL PICK-UP BLOCK (KHM-310CAB/313CAB)
3-14. BASE UNIT (DVBU101)
1
two floating screws
(PTPWH M2.6)
2
floating screw
(PTPWH M2.6)
3
base unit (DVBU101)
1
two screws
(BTP2.6
×
8)
2
three screws
(BTTP 2.6)
6
holder (310) assy
4
insulator screw
7
insulator screw
qd
optical pick-up block
(KHM-310CAB/313CAB)
5
0
insulator
qa
insulator
8
insulator screw
qs
insulator
3
insulator screw
9
insulator
HCD-HDX265/HDX266/HDX267W/HDX465/HDX466/HDX665
19
3-17. LEVER ASSY
3-16. GEAR (SUB TRAY 1)/GEAR (SUB TRAY 2)
1
five screws
(PTPWH2.6
×
8)
2
gear (sub tray 2)
3
gear (sub tray 2)
4
three gears
(sub tray 1)
gear (sub tray 2)
gear (sub tray 2)
gear (sub tray 1)
PRECAUTION DURING GEAR (SUB TRAY 1/2) INSTALLATION
Align the marks of the gears as shown in the illustration.
1
screw
(PTPWH2.6
×
8)
3
floating screw
(PTPWH M2.6)
5
lever (sub tray)
lever (sub tray)
6
lever (release)
lever (release)
7
lever (mode)
cam (BU)
lever (mode)
2
shutter (tray)
4
lever (sub tray)
shutter (tray)
When re-assembling, insert the lever (sub tray)
between the bosses of the shutter (tray).
between the bosses of the shutter (tray).
boss
boss
Before re-assembling, slide the cam (BU)
in the direction of the arrow.
in the direction of the arrow.
Before re-assembling, align the lever (release)
and the lever (sub tray) with the lever (mode)
as shown in the illustration.
and the lever (sub tray) with the lever (mode)
as shown in the illustration.
dowel
dowel
HCD-HDX265/HDX266/HDX267W/HDX465/HDX466/HDX665
20
3-19. CAM (STOCKER)
3-18. STOCKER SECTION
2
stocker section
1
Rotate the gear (SS3) in the
direction of the arrow.
5
two screws
(PTPWH2.6
×
8)
6
two cams
(stocker)
8
cam
(stocker)
cam (stocker)
cam (stocker)
cam (stocker)
hole
gear
(stocker 2)
(stocker 2)
gear
(stocker 2)
(stocker 2)
gear
(stocker 2)
(stocker 2)
gear (stocker 3)
2
tension spring (SW)
4
lever (SW)
1
floating screw
(PTPWH M2.6)
7
screw
(PTPWH2.6
×
8)
3
hook
PRECAUTION DURING CAM (STOCKER) INSTALLATION
Before installing the cams (stocker), fix the gear (stocker 3) in
the manner so that the hole of the gear (stocker 3) should be
aligned with the hole of the chassis located beneath
the gear (stocker 3). Be sure to install the cams (stocker) in
such a way that the grooves of the cams (stocker) face
the direction of the arrows.
the manner so that the hole of the gear (stocker 3) should be
aligned with the hole of the chassis located beneath
the gear (stocker 3). Be sure to install the cams (stocker) in
such a way that the grooves of the cams (stocker) face
the direction of the arrows.
Click on the first or last page to see other DAV-HDX265 / DAV-HDX266 / DAV-HDX267W / DAV-HDX465 / DAV-HDX466 / DAV-HDX665 / HCD-HDX265 / HCD-HDX266 / HCD-HDX267W / HCD-HDX465 / HCD-HDX466 / HCD-HDX665 service manuals if exist.