Sony DAV-DZ266K / DAV-DZ270K / DAV-DZ570K / DAV-DZ777K / HCD-DZ265K / HCD-DZ266K / HCD-DZ270K / HCD-DZ570K / HCD-DZ777K Service Manual ▷ View online
HCD-DZ265K/DZ266K/DZ270K/DZ570K/DZ777K
2
SAFETY-RELATED COMPONET WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
General
Power requirements
Saudi Arabia models:
Saudi Arabia models:
127 V - 240 V AC, 50/60 Hz
Other models:
220 V - 240 V AC, 50/60 Hz
Power consumption
HCD-DZ265K/DZ266K: On:
HCD-DZ265K/DZ266K: On:
155
W
Standby: 0.3 W (at the
Power Saving mode)
HCD-DZ270K: On:
160
W
Standby: 0.3 W (at the
Power Saving mode)
HCD-DZ570K/DZ777K: On:
170
W
Standby: 0.3 W (at the
Power Saving mode)
Output voltage (DIGITAL MEDIA PORT)
(HCD-DZ570K/DZ777K only)
DC
(HCD-DZ570K/DZ777K only)
DC
5
V
Output current (DIGITAL MEDIA PORT)
(HCD-DZ570K/DZ777K only)
700
(HCD-DZ570K/DZ777K only)
700
mA
Dimensions (approx.)
430 mm
× 66 mm × 385 mm
(w/h/d) incl. projecting parts
Mass (approx.)
4.2 kg
Design and specifi cations are subject to change
without notice.
without notice.
Special Component Notice
The components identifi ed by mark
The components identifi ed by mark
9 contain confi dential infor-
mation.
Strictly follow the instructions whenever the components are re-
paired and/or replaced.
Strictly follow the instructions whenever the components are re-
paired and/or replaced.
• Abbreviation
EA
EA
: Saudi Arabia model
PH
: Philippines model
SP
: Singapore model
RU :
Russian
model
TH :
Thai
model
Model
Part No.
DZ270K: SP model
3-273-759-3[]
DZ270K: TH model
3-273-759-4[]
DZ265K: RU model
3-273-759-6[]
DZ270K: EA model
3-273-760-7[]
DZ570K: SP model
3-273-761-2[]
DZ570K: TH model
3-273-761-8[]
DZ570K: EA model
3-273-762-4[]
DZ777K: SP model
3-273-763-0[]
DZ777K: TH model
3-273-763-4[]
DZ266K: RU model
3-273-763-6[]
DZ270K: PH model
3-273-763-9[]
DZ570K: PH model
3-273-764-8[]
MODEL IDENTIFICATION
– Back Panel –
– Back Panel –
Parts No.
HCD-DZ265K/DZ266K/DZ270K/DZ570K/DZ777K
3
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if the
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong
viscosity
Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of soldering iron around 270 °C during
• Keep the temperature of soldering iron around 270 °C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Laser component in this product is capable of emitting radiation exceed-
ing the limit for Class 1.
ing the limit for Class 1.
This appliance is classifi ed as a
CLASS 1 LASER product.
This marking is located on the
rear or bottom exterior.
CLASS 1 LASER product.
This marking is located on the
rear or bottom exterior.
CAUTION
Use of controls or adjustments or performance of procedures other than
those specifi ed herein may result in hazardous radiation exposure.
Use of controls or adjustments or performance of procedures other than
those specifi ed herein may result in hazardous radiation exposure.
About This Operating
Instructions
• The instructions in this Operating Instructions
describe the controls on the remote. You can
also use the controls on the unit if they have the
same or similar names as those on the remote.
also use the controls on the unit if they have the
same or similar names as those on the remote.
• The Control Menu items may vary depending
on the area.
• “DVD” may be used as a general term for a
DVD VIDEO, DVD+RW/DVD+R, and DVD-
RW/DVD-R.
RW/DVD-R.
• Measurements are expressed in feet (ft) for
North American models.
• The default setting is underlined.
About the S-AIR function
The system is compatible with the S-AIR
function, which allows transmission of sound
between S-AIR products wirelessly.
The following S-AIR products can be used with
the system:
function, which allows transmission of sound
between S-AIR products wirelessly.
The following S-AIR products can be used with
the system:
• Surround amplifier: You can enjoy surround
speaker sound wirelessly.
• S-AIR receiver: You can enjoy system sound
in another room.
These S-AIR products can be purchased as an
option (the S-AIR product lineup differs
depending on the area).
option (the S-AIR product lineup differs
depending on the area).
Notes or instructions for the surround amplifier
or S-AIR receiver in this operating instructions
refer only to when the surround amplifier or
S-AIR receiver is used.
For details on the S-AIR function, see “Using an
S-AIR Product” (page 83).
or S-AIR receiver in this operating instructions
refer only to when the surround amplifier or
S-AIR receiver is used.
For details on the S-AIR function, see “Using an
S-AIR Product” (page 83).
HCD-DZ265K/DZ266K/DZ270K/DZ570K/DZ777K
4
4
GB
Playable Discs
1)
MP3 (MPEG1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio data. MP3 files
must be in MPEG1 Audio Layer 3 format.
n
o
c
I
s
c
i
t
s
i
r
e
t
c
a
r
a
h
C
o
g
o
l
c
s
i
D
e
p
y
T
O
E
D
I
V
D
V
D
•
O
E
D
I
V
D
V
D
• DVD-R/DVD-RW in DVD
VIDEO format or video mode
• DVD+R/DVD+RW in DVD
VIDEO format
VR (Video
Recording) mode
Recording) mode
• DVD-R/DVD-RW in VR (Video
Recording) mode (except for
DVD-R DL)
DVD-R DL)
D
C
o
i
d
u
A
r
e
p
u
S
•
D
C
o
i
d
u
A
r
e
p
u
S
)
s
c
s
i
d
0
.
2
d
n
a
1
.
1
.
r
e
V
(
D
C
O
E
D
I
V
•
D
C
O
E
D
I
V
• Super VCD
• CD-R/CD-RW/CD-ROM in video
CD format or Super VCD format
D
C
o
i
d
u
A
•
D
C
• CD-R/CD-RW in audio CD format
n
i
M
O
R
-
D
C
/
W
R
-
D
C
/
R
-
D
C
•
–
D
C
A
T
A
D
DATA CD format, containing MP3
files
files
1)
, JPEG image files
2)
, and
DivX video files
3)4)
, and
conforming to ISO 9660
5)
Level 1/
Level 2, or Joliet (extended format)
/
W
R
-
D
V
D
/
R
-
D
V
D
/
M
O
R
-
D
V
D
•
–
D
V
D
A
T
A
D
DVD+R/DVD+RW in DATA
DVD format, containing MP3
files
DVD format, containing MP3
files
1)
, JPEG image files
2)
, and
DivX video files
3)4)
, and
conforming to UDF (Universal
Disk Format)
Disk Format)
HCD-DZ265K/DZ266K/DZ270K/DZ570K/DZ777K
5
5
GB
2)
JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera File system”: Image
standards for digital cameras regulated by Japan Electronics and Information Technology Industries Association
(JEITA).)
(JEITA).)
3)
DivX
®
is a video file compression technology, developed by DivX, Inc.
4)
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
5)
A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for
Standardization).
“DVD-RW,” “DVD+RW,” “DVD+R,”“DVD VIDEO,” and the “CD” logos are trademarks.
The system cannot play the following discs:
• CD-ROM/CD-R/CD-RW other than those recorded in the formats listed on page 4
• CD-ROM recorded in PHOTO CD format
• Data part of CD-Extra
• CD Graphics disc
• DVD Audio
• DATA DVD that does not contain MP3 files, JPEG image files, or DivX video files
• DVD-RAM
Also, the system cannot play the following discs:
• A DVD VIDEO with a different region code (page 6)
• A disc that has a non-standard shape (e.g., card, heart)
• A disc with paper or stickers on it
• A disc that has the adhesive of cellophane tape or a sticker still left on it
In some cases, CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW cannot be played on this system
due to the recording quality or physical condition of the disc, or the characteristics of the recording
device and authoring software.
The disc will not play if it has not been correctly finalized. For more information, refer to the operating
instructions for the recording device.
Note that some playback functions may not work with some DVD+RWs/DVD+Rs, even if they have
been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA
DVDs created in Packet Write format cannot be played.
due to the recording quality or physical condition of the disc, or the characteristics of the recording
device and authoring software.
The disc will not play if it has not been correctly finalized. For more information, refer to the operating
instructions for the recording device.
Note that some playback functions may not work with some DVD+RWs/DVD+Rs, even if they have
been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA
DVDs created in Packet Write format cannot be played.
Music discs encoded with copyright protection technologies
This product is designed to play back discs that conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with copyright protection technologies are marketed by some
record companies. Please be aware that among those discs, there are some that do not conform to the
CD standard and may not be playable by this product.
Recently, various music discs encoded with copyright protection technologies are marketed by some
record companies. Please be aware that among those discs, there are some that do not conform to the
CD standard and may not be playable by this product.
Note on DualDiscs
A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital
audio material on the other side. However, since the audio material side does not conform to the
Compact Disc (CD) standard, playback on this product is not guaranteed.
audio material on the other side. However, since the audio material side does not conform to the
Compact Disc (CD) standard, playback on this product is not guaranteed.
Example of discs that the system cannot play
Note about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW