DOWNLOAD Sony DAV-DZ100K / HCD-DZ100K / HCD-DZ500KF Service Manual ↓ Size: 5.7 MB | Pages: 83 in PDF or view online for FREE

13

2

DMB bracket

1

three screws (+BV 3)

6

DVD mechanism deck

    (CDM85-DVBU102)

3

three screws (+BV 3)

4

wire (flat type) 13p

5

connector

4

2

3

two claws

5

tray

1

Move the chuck cam 
in the direction of the arrow.

bottom side

14

1

two claws

5

three claws

7

 MS-203 board

6

 DC motor

3

 belt

2

 chuck cam

4

 screw

(M 1.7 

×

 2.5) 

15

1

two claws

BU holder

2

loading base

5

two insulators

6

two insulators

3

four insulator screws

4

CDM85-DVBU102

7

optical pick-up 

     (KHM-310CAA/C2NP) 

1

two claws

3

two claws

2

 chuck cam

4

 base unit (DVBU102) 

16

Regarding the notification symbol “R”
Because the number of the operating buttons of this product
are limited, some operations require use of the operating
buttons of the remote commander, When a specific operation
requires use of the operating buttons of the remote
 commander, “R” is added to the specific operating procedure
in this manual. For example,   MENU/NO  “R”  is  MENU/NO
button of remote commander.

Incorrect operations may be performed if the test mode is
not entered properly.
In this case, press the  ?/1  button to turn the power off, and
retry to enter the test mode.

3. Disc Tray Lock
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure :

1. Press the  ?/1  button to turn the set on.
2. Press the  FUNCTION  button to set DVD function.
3. Insert a disc.
4. Press the  

x  

button and the  A  button simultaneously for five

seconds.

5. The message “LOCKED” is displayed and the tray is locked.

1. Press the  

x  

button and the  A  button simultaneously for five

seconds. again.

2. The message “UNLOCKED” is displayed and the tray is

unlocked.

When “LOCKED” is displayed, the slot lock is not released by
turning power on/off with the  ?/1  button.

• Use this mode when returning the set to the customer after

repair.

1. Press the  ?/1  button to turn the set on.
2. Press the  FUNCTION  button to set the function “DVD”.
3. Press three buttons  x  and  ?/1  simultaneously.
4. After a message “MECHA LOCK” is displayed on the

fluorescent indicator tube, pull out the AC plug.

5. To exit from this mode, press the  ?/1  button to turn the set

on.

1. Press the  ?/1  button to turn the set on.
2. Press the  FUNCTION  button to set the function “DVD”.
3. Press the three buttons  . ,  A  and  >  simultaneously.
4. To exit from this mode, press the  ?/1  button to turn the set

on.

• A step of AM channels can be changed over between 9 kHz

and 10 kHz.

1. Press  ?/1  button to turn the set ON.
2. Select the function “TUNER”, and press  FUNCTION  button

to select the BAND “AM”.

3. Press  ?/1  button to turn the set OFF.
4. Press  >  and  ?/1  buttons simultaneously, and the display

of fluorescent indicator tube changes to “AM 9 k STEP” or
“AM 10 k STEP”, and thus the channel step is changed over.

• The cold reset clears all data including preset data stored in

the RAM to initial conditions. Execute this mode when
returning the set to the customers.

1. Press the  ?/1  button to turn the power on.
2. Press three buttons  x  ,   A  and   ?/1  simultaneously.
3. When this button is operated, display as “COLD RESET” for

a while and all of the settings are reset.

• This mode is used to check the software version, LCD, LED

and keyboard.

1. Press the  ?/1  button to turn on the power.
2. Press three bottons  X ,  . and  A  simultaneously.
3. When the display LED test mode is activated, all segments

are turned on.

4. To exit from this mode, pull out the AC plug.

Note:
(       ) : For DZ500KF

1. When the panal test mode is activated, press the  .  button

and the message “DS1K

***” (‘‘DS6K***”) is displayed, the

version test mode is activated.

2. Whenever press the  .  button, the version is displayed in

order of CC2, MC, SYS, UI, DVD, TA, TM and DS1K
(DS6K).

3. Press the  >  button and the date of the softwafe production

is displayed.

4. Press the  >  button again and the version is displayed.
5. To exit from this mode, pull out the AC plug.

1. When the panel test mode is activated, press the  H  button,

to select the key test mode.

2. To enter the KEY test mode, the fluorecent indicator displays

“K0 VO”. Each time a button is pressed, “KEY” value
increases. However, once a button is pressed, it is no longer
taken into account. When all keys are pressed correctly, “K8
VO” is displayed.

3. To exit from this mode, pull out the AC plug.