Sony DAV-C700 / DAV-C900 / HCD-C700 / HCD-C900 Service Manual ▷ View online
13
HCD-C700/C900
2-12. TRAY (240)
2-13. CHASSIS (MOLD B) SECTION
1
Three screws
+BVTP
(2.6
(2.6
×
8)
2
Insert the gear (eject)
under the gear (LD
deceleration).
under the gear (LD
deceleration).
1
Insert the portion A of
chassis (mold B) section
into the portion B of
slider (selection).
chassis (mold B) section
into the portion B of
slider (selection).
Gear (eject)
Portion A
Portion B of
slider (selection)
slider (selection)
3
Gear (eject)
2
C
hassis (mold B)
section
C
hassis (mold B)
section
PRECAUTION DURING CHASSIS (MOLD B)
SECTION INSTALLATION
SECTION INSTALLATION
A
B
Pulley (LD)
Stocker section
Tray (240)
Slider (selection)
Pulley (mode)
1
Rotating the pulley (LD), shift the slider (selection) in the arrow
A
direction.
2
Rotating the pulley (mode) in the arrow direction, adjust the tray (240) to be removed.
3
Rotating the pulley (LD), shift the slider (selection) in the arrow
B
direction.
4
Rotating the pulley (mode) in the arrow direction, remove the tray (240) to be removed.
14
HCD-C700/C900
2-15. STOCKER SECTION
3
Stocker section
2
Two step screws (J)
1
Two step screws (J)
Hook the portion A of tray (240)
to the slider (selection).
to the slider (selection).
Portion A
of tray (240)
of tray (240)
Sticking of
slider (selection)
slider (selection)
PRECAUTION DURING STOCKER
SECTION INSTALLATION
SECTION INSTALLATION
2-14. LOAD MOTOR BOARD, MOTOR (LOADING) ASSEMBLY
4
Two screws
+BVTP
(2.6
(2.6
×
8)
7
Motor (loading)
assembly (M702)
6
LOAD MOTOR
board
1
Belt (communication)
3
Belt (loading)
2
Belt (loading)
5
Remove the two solderings
15
HCD-C700/C900
2-16. SLIDER (SELECTION), TENSION SPRING (SHUTTER), SLIDER (SHUTTER)
PRECAUTION DURING SLIDER
(SELECTION) INSTALLATION (1)
(SELECTION) INSTALLATION (1)
PRECAUTION DURING SLIDER
(SELECTION) INSTALLATION (2)
(SELECTION) INSTALLATION (2)
1
Two floating screws
+PTPWHM,
+PTPWHM,
(2.6 x 6)
2
Washer, 8
3
Compression
spring (gear A)
4
Slider (selection),
Tension spring (shutter),
Slider (shutter)
Slider (shutter)
Slider (selection)
Gear (choking)
Insert a convex portion into
the groove of gear (chucking).
the groove of gear (chucking).
Insert the slider (selection)
into the portion A.
into the portion A.
Portion A
16
HCD-C700/C900
PRECAUTION DURING GEAR (GEAR U/D SLIDER), GEAR (GEAR B), GEAR (GEAR A) INSTALLATION
1
Slide the slider (U/D)
fully in the arrow
direction.
fully in the arrow
direction.
Slider (U/D)
3
Gear (gear B)
2
Gear (U/D slider)
4
Gear (gear A)
Portion A
Adjust the gear (gear B) with the
portion A as shown.
portion A as shown.
Slider (U/D) gear
Adjust the gear so that it meshes with
the bottom tooth of slider (U/D) gear,
as shown.
the bottom tooth of slider (U/D) gear,
as shown.
Gear
(gear B)
(gear B)
linearly
Adjust so as to be aligned with
gear B linearly, as shown.
gear B linearly, as shown.
7
Screw
+BVTP
(2.6
(2.6
×
8)
6
Gear (gear B)
8
Gear (U/D slider)
5
Gear (gear A)
2
Washer
3
Compression spring
4
Gear (selection)
1
Gear (relay)
2-17. GEAR (GEAR A), GEAR (GEAR B), GEAR (U/D SLIDER)
Click on the first or last page to see other DAV-C700 / DAV-C900 / HCD-C700 / HCD-C900 service manuals if exist.