DOWNLOAD Sony CX-JV1 / JAX-V1 Service Manual ↓ Size: 8.74 MB | Pages: 95 in PDF or view online for FREE

5

3

Pull-out the disc tray.

1

Remove the case (side-L).

2

Turn the loading gear in the direction of arrow 

A

.

A

6

main board (CN691)

Connect wire (flat type) (19 core) to
main board (CN691) and VMP50 board (CN801).

VMP50 board (CN801)

Connect wire (flat type) (13 core) to
panel board (CN601) and mechanical deck.

panel board (CN601)

main board (CN301)

7

4 #

Connect the speaker cord of the supplied front speakers
here.

5

Outputs video signals. Connect to the video input jack
of your TV set with the supplied video connecting cord.
Select the appropriate video input on your TV. Refer to
the operating instructions of your TV.

6

Switches AC voltage according to your local voltage.
Make sure it matches your local voltage.

7

This section is extracted from
instruction manual.

1

Rotates the CD trays.

2

6

Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.

3

Selects various modes (ECO and Repeat/Shuffle/
Programed playback, etc.) when used in combination with
ENTER and MULTI JOG.

4

Fixes the modes and the time (ECO, Repeat/Shuffle/
Programed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.

5

When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programed
playback.
Tuner: selects a preset station.
Tape: selects a reverse mode and specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.

6

Adjusts the microphone volume.

Connects the microphone here.

7

Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.

@

Receives a signal from the remote.

#

Adjusts the volume.

$

Enhances high frequency sound.

8

Starts dubbing a whole tape.
w

Starts recording.

9

Selects a disc.

0 z

Opens or closes the disc compartment.

!

Selects Tape function, and deck A or B.

Selects Tuner function and the radio band.

Selects the function of external equipment connected to
VIDEO/AUX jacks.

Selects CD function.

% c

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
s

v

CD and Tape: stops playback.
Tuner: clears a station preset.
f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a

CD and Tape: pauses playback.
Tuner: stores the received station in to preset.

^

Emphasizes low frequency sound.

&

Produces rich and clear low frequency sound.

*

Displays the time and the remaining time for CD.

-

+

Selects a previous album or a succeeding album with
MP3-CDs.

1

Sets the color system of the video signal output via the
VIDEO OUT jack. Turn off the power, and then set the
switch according to your TV set;
- PAL: When connecting to a PAL system TV.
- NTSC: When connecting to a NTSC system TV.
- AUTO: When connecting to a multi color system TV.

• In case of setting the switch to "AUTO", you need to

adjust the color system according to your VCD to play
back. Hold down CD button for about 6 seconds in stop
mode in CD function, and "PAL" (initial) or "NTSC"
appears on the display (except when the loaded disc is
MP3-CD).
When playing back a PAL VCD, hold down CD and
release it when "PAL" appears.
When playing back a NTSC VCD, do the same procedure
and release it when "NTSC" appears.
When the function is changed or the unit is turned off,
PAL is resorted.

• This unit does not support color systems other than

PAL and NTSC, such as NTSC 4.43 or SECAM.

• If there is a color or picture trouble in the AUTO mode,

select NTSC or PAL.

2

Ω

Plug in the supplied AM and FM antennas here.

3

Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.

Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".

Outputs analog sound signals to external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
When the function is set to "VIDEO", "AUX" or "TV",
no signal is output from the REC OUT jacks.

8

Buttons with the same or similar names as the main unit
basically have the same function.

1

2

CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.

The numbered buttons take on these functions below when pressed
with SHIFT held down

:

Enters AI Edit Recording or Programed Edit Recording
mode when pressed in stop mode.

Selects Tuner function and the radio band.

Changes the spectrum analyzer display.

Switches between stereo or monaural FM reception.

Selects a Multiplex mode.

CD: selects Shuffle, Programmed playback, etc.

Adjusts the echo level for CD function.

3 r

t

7

8

Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.

9

Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).

0

Select a disc.

! c

d

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.

s

CD and Tape: stops playback.

f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.

@

Plays back a VCD slowly while held down.

#

+

-

Adjusts the volume.

$

Clears a track of the CD programed playback and a Radio
preset station.

CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
VCD: goes to the next/previous page or scene.
DIGEST: Activates the Digest playback function when
playback a VCD.
ZOOM: Enlarge VCD picture during pause.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.

4

-

+

7

&

MP3: selects a previous album or a succeeding album.
CD: adjust the playback sound key for CD function

5

Manually turns the PBC function on and off for a PBC
disc.

Marks a desired point when playing back a VCD.

Displays disc information such as the elapsed playback
time on the TV screen.

6

Enters timer setting mode.

Use the remote.

1 Press CLOCK/TIMER/SET.

Go to step 3 when the time appears and the 'hour' flashes.

2 Press  r  or  t  repeatedly until "CLOCK

SET

" appears in the display and then press

ENTER.

3 Press r or t repeatedly to set the hour

and then press ENTER.

4 Press r or t repeatedly to set the minute

and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.

•MULTI JOG is also available in place of r or t.

To display the time
Press DISPLAY. The time will be displayed for 6 seconds.

Tip:
"AM 12:00" indicates midnight and "PM 12:00" noon.

If "- -:- -" appears when the unit is turned off
There has been a power interruption. Reset the clock.

 Enters CD repeat playback mode.

Switches the sleep-timer on/off and selects the duration.

Selects BASS or TREBLE setting mode

S l t ti

l b k ti

Selects timer playback, timer recording or timer off.