Sony CX-JT7 / JAX-PK7 / JAX-T7 Service Manual ▷ View online
61
CX-JT7
•
PANEL BOARD IC901 LC8767962B-51F7 (SYSTEM CONTROLLER)
Pin No.
Pin Name
I/O
Description
1
O-SYS-MUTE
O
Line muting on/off control signal output terminal “H”: muting on
2
I-BU1924 DI
I
RDS serial data input from the tuner unit (AEP and UK models)
Not used (Except AEP and UK models)
Not used (Except AEP and UK models)
3
I-BU1924 CLK
I
RDS serial data transfer clock signal input from the tuner unit (AEP and UK models)
Not used (Except AEP and UK models)
Not used (Except AEP and UK models)
4
O-CL78646 RESET
O
Reset signal output to the CD DSP “L”: reset
5
O-CL78646 CE
O
Chip enable signal output to the CD DSP
6
O-CL78684 CE
O
Chip enable signal output to the MP3 decoder
7
O-M61529 CLK
O
Serial data transfer clock signal output to the electrical volume
8
O-BU2099 LCK
O
Serial data latch pulse clock signal output to the LED driver, tape mechanism controller, multi
controller and bass boost controller
controller and bass boost controller
9
O-LC72121 CE
O
Chip enable signal output to the tuner unit
10
I-CL78684 SYNC
I
Chip enable signal input from the MP3 decoder
11
RESET
I
System reset signal input from the reset signal generator “L”: reset
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
12
XT1
I
Sub system clock input terminal (32.768 kHz)
13
XT2
O
Sub system clock output terminal (32.768 kHz)
14
VSS1
—
Ground terminal
15
CF1
I
Main system clock input terminal (8.64 MHz)
16
CF2
O
Main system clock output terminal (8.64 MHz)
17
VDD1
—
Power supply terminal (+3.3V)
18
I-SPEANA L
I
Spectrum analyzer drive (low frequency) signal input from the spectrum analyzer band-pass filter
19
I-SPEANA M
I
Spectrum analyzer drive (middle frequency) signal input from the spectrum analyzer band-pass
filter
filter
20
I-SPEANA H
I
Spectrum analyzer drive (high frequency) signal input from the spectrum analyzer band-pass filter
21
I-MIC/I-TU SIG
I
Mic audio signal input terminal (Except AEP, UK and CIS models)
Not used (AEP, UK and CIS models)
Not used (AEP, UK and CIS models)
22
I-BU UP DOWN/
CD OPEN CLOSE
I
Optical pick-up up/down detection signal and CD tray open/close detection signal input terminal
23
NC
—
Not used
24 to 26
I-KEY3 to I-KEY1
I
Front panel key input terminal (A/D input)
27
I-POWER DOWN
I
AC detection signal input terminal “L”: power down
28
I-RMC
I
Remote control signal input terminal
29
I-HOLD
I
System malfunction signal (hold signal) input from the power amplifier circuit
30 to 40
G1 to G11
O
Grid drive signal output to the fluorescent indicator tube
41 to 45
S1 to S5
O
Segment drive signal output to the fluorescent indicator tube
46
VDD3
—
Power supply terminal (+3.3V)
47
S6/I-A-MODE
I/O
Segment drive signal output to the fluorescent indicator tube and deck-A mode detection signal
input from the tape mechanism deck block “L” active
input from the tape mechanism deck block “L” active
48
S7/I-A-PHOTO
I/O
Segment drive signal output to the fluorescent indicator tube and deck-A tape reel rotating
detection signal input from the tape mechanism deck block
detection signal input from the tape mechanism deck block
49
S8/I-A-HALF
I/O
Segment drive signal output to the fluorescent indicator tube and deck-A cassette detection signal
input from the tape mechanism deck block “L”: cassette in
input from the tape mechanism deck block “L”: cassette in
50
I-REC (FWD)
I
Recording-proof (forward direction) detection signal input from the tape mechanism deck block
“L”: recording possible
“L”: recording possible
51
FIX0
—
Not used
62
CX-JT7
Pin No.
Pin Name
I/O
Description
52
I-B-PHOTO
I
Deck-B tape reel rotating detection signal input from the tape mechanism deck block
53
I-B-HALF
I
Deck-B cassette detection signal input from the tape mechanism deck block “L”: cassette in
54
S9/I-B-MODE
I/O
Segment drive signal output to the fluorescent indicator tube and deck-B mode detection signal
input from the tape mechanism deck block “L” active
input from the tape mechanism deck block “L” active
55
S10/I-REC (REW)
I/O
Segment drive signal output to the fluorescent indicator tube and recording-proof (reverse
direction) detection signal input from the tape mechanism deck block
“L”: recording possible
direction) detection signal input from the tape mechanism deck block
“L”: recording possible
56 to 68
S11 to S23
O
Segment drive signal output to the fluorescent indicator tube
69 to 71
S24 to S26
O
Segment drive signal output to the fluorescent indicator tube Not used
72
VDD4
—
Power supply terminal (+3.3V)
73 to 75
—
—
Not used
76
I-HP-MUTE
I
Headphone detection signal input terminal “H”: headphone in
77
I-TRE B
I
Jog dial pulse input from the rotary encoder (TREBLE/MIDDLE) (B phase input)
78
I-TRE A
I
Jog dial pulse input from the rotary encoder (TREBLE/MIDDLE) (A phase input)
79
I-BASS B
I
Jog dial pulse input from the rotary encoder (BASS) (B phase input)
80
I-BASS A
I
Jog dial pulse input from the rotary encoder (BASS) (A phase input)
81
I-JOG B
I
Jog dial pulse input from the rotary encoder (jog dial) (B phase input)
82
I-JOG A
I
Jog dial pulse input from the rotary encoder (jog dial) (A phase input)
83
I-VOL B
I
Jog dial pulse input from the rotary encoder (VOLUME) (B phase input)
84
I-VOL A
I
Jog dial pulse input from the rotary encoder (VOLUME) (A phase input)
85
I-WRQ
I
CD interruption signal input from the CD DSP
86
I-CD DRF
I
CD focus on/off detection signal input from the CD DSP
87
I-LC72121 DI
I
Serial data input from the tuner unit
88
I-TUNER TUNE
I
Tuning detection signal input from the tuner unit “L”: tuned
89
VSS2
—
Ground terminal
90
VDD2
—
Power supply terminal (+3.3V)
91
O-LC72121/
M61529/BU2099
DO
O
Serial data output to the tuner unit, electrical volume and LED driver
92
O-LC72121/
BU2099 CLK
O
Serial data transfer clock signal output tuner unit, LED driver, tape mechanism controller, multi
controller and bass boost controller
controller and bass boost controller
93
O-POWER LED
O
LED drive signal output of the POWER 1 STANDBY/ON indicator “L”: LED on
94
O-POWER RELAY
O
Power on/off relay drive signal output terminal “H”: power on
95
O-KEYSCAN
O
Key scan signal output for initial diode and switches in the tape mechanism deck
“L”: key scan
“L”: key scan
96
I-CD NUMBER
SENS
I
CD table address detection signal input terminal
97
I-TUNER STEREO
I
FM stereo detection signal input from the tuner unit “L”: stereo
98
O-LC78646/
LC78684 DO
O
Serial data output to the CD DSP and MP3 decoder
99
I-LC78646/
LC78684 DI
I
Serial data input from the CD DSP and MP3 decoder
100
O-LC78646/
LC78684 CLK
O
Serial data transfer clock signal output to the CD DSP and MP3 decoder
63
CX-JT7
7-1. CASE SECTION
SECTION 7
EXPLODED VIEWS
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
delay should be anticipated when ordering
these items.
• The mechanical parts with no reference num-
ber in the exploded views are not supplied.
• Accessories are given in the last of the elec-
trical parts list.
NOTE:
• -XX and -X mean standardized parts, so they
may have some difference from the original
one.
one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color Cabinet's Color
• Abbreviation
E51 : Chilean and Peruvian models
MX : Mexican model
MX : Mexican model
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
1
4-233-980-01 RUBBER FOOT
2
4-246-682-01 EMBLEM (30), MP3
3
4-245-158-01 EMBLEM
4
4-245-113-01 PANEL, TRAY
5
3-363-099-01 SCREW (CASE 3 TP2)
6
3-363-099-41 SCREW (CASE 3 TP2)
7
4-245-183-51 CASE (SIDE-L)
8
4-244-849-51 CASE (TOP)
9
4-245-184-51 CASE (SIDE-R)
#1
7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
1
2
3
4
5
6
#1
#1
#1
#1
CDM74F-K6BD71A
front panel section-1
#1
#1
#1
9
6
5
7
8
The components identified by
mark 0 or dotted line with mark
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Replace only with part number
specified.
64
CX-JT7
7-2. FRONT PANEL SECTION-1
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
51
4-245-125-01 KNOB, ROTARY VOLUME
52
4-245-126-11 KNOB, ROTARY JOG
53
4-246-528-01 RING (BASS)
54
4-245-131-01 PANEL, BASS
55
4-245-128-01 KNOB, ROTARY BASS (AEP, UK, CIS)
55
4-245-132-01 KNOB, ROTARY BASS (LH) (MX, E51)
56
4-245-127-11 KNOB, ROTARY TREBLE
57
4-245-114-51 WINDOW, DISPLAY (AEP, UK)
57
4-245-114-61 WINDOW, DISPLAY (CIS)
57
4-245-114-71 WINDOW, DISPLAY (MX, E51)
58
1-769-889-11 WIRE (FLAT TYPE) (7 CORE)
59
4-245-135-01 GUIDE, LED GRAPHIC EQUALIZER (L)
60
4-245-134-01 GUIDE, LED POWER
61
4-245-141-01 GUIDE, LED GRAPHIC EQUALIZER (R)
62
A-4734-180-A PANEL BOARD, COMPLETE (AEP, UK)
62
A-4734-284-A PANEL BOARD, COMPLETE (MX, E51)
62
A-4734-792-A PANEL BOARD, COMPLETE (CIS)
63
1-773-322-11 WIRE (FLAT TYPE) (31 CORE)
64
1-769-976-11 WIRE (FLAT TYPE) (13 CORE)
65
1-769-919-11 WIRE (FLAT TYPE) (9 CORE)
66
4-245-119-01 KNOB, MICROPHONE (MX, E51)
67
4-245-144-01 GUIDE, LED BASS
68
1-827-399-11 WIRE (FLAT TYPE) (3 CORE)
#1
7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
51
52
53
54
55
66
56
57
60
58
59
61
68
62
67
63
64
65
front panel section-2
#1
#1
Click on the first or last page to see other CX-JT7 / JAX-PK7 / JAX-T7 service manuals if exist.