DOWNLOAD Sony CX-JN5 / JAX-N5 / JAX-PK5 Service Manual ↓ Size: 6.54 MB | Pages: 76 in PDF or view online for FREE

Model
CX-JN5 JAX-N5 JAX-PK5
Pages
76
Size
6.54 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
cx-jn5-jax-n5-jax-pk5.pdf
Date

Sony CX-JN5 / JAX-N5 / JAX-PK5 Service Manual ▷ View online

SERVICE MANUAL
Model Name Using Similar Mechanism
NEW
CD Mechanism Type
CDM74-K6BD71A, CDM74S-K6BD71A,
CDM74S-K6BD72
CD
Base Unit Name
BU-K6BD71A, BU-K6BD72
Section
Optical Block Name
KSM-213DCP
Optical Pick-up Name
KSS-213D
Tape deck
Model Name Using Similar Mechanism
NEW
Section
Tape Transport Mechanism Type
CWM43FF13, CWM43FR16,
CWM43FR26
COMPACT DISC DECK RECEIVER
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
CX-JN5
Ver. 1.3  2005.05
9-877-250-04
Sony Corporation
2005E05-1
Personal Audio Group
© 2005.05
Published by Sony Engineering Corporation
SPECIFICATIONS
CX-JN5 is the amplifier, CD player, tape deck
and tuner section in JAX-N5/PK5.
TUNER
FM tuning range
 Except CIS model:
 CIS model:
87.5 MHz to 108 MHz
FM usable sensitivity (IHF)
 Except AEP, UK, CIS models:
 AEP, UK models:
 CIS model:
13.2 dBf
FM antenna terminal
75 ohms (unbalanced)
AM tuning range
 US, CND, E51, MX models:
 AEP, UK, CIS, E, SP, TW models: 
 KR, AUS models:
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1710 kHz (9 kHz step)
AM usable sensitivity
350 
µV/m
AM antenna
Loop antenna
AMPLIFIER
Power output
 US, CND models:
 
96 W + 96 W (40 Hz - 20 kHz, THD
less than 1 %, 6 ohms)
120 W + 120 W (1 kHz, THD less
than 10 %, 6 ohms)
Total harmonic distortion
 US, CND models:
 AEP, UK, CIS models:
 
Except US, CND, AEP,
 UK, CIS models:
0.08 % (45 W, 1 kHz, 6 ohms)
Input
VIDEO/AUX: 400 mV
Outputs
SPEAKERS: 6 ohms or more
PHONES: 32 ohms or more
CASSETTE DECK
Track format
4 tracks, 2 channels stereo
Frequency response
50 Hz – 8 kHz
GENERAL
Power requirements
 US, CND, MX models:
 AEP, UK, CIS models:
 E, E51, SP, TW models:
 KR model:
 AUS model:
120 V AC, 60 Hz
65 MHz to 74 MHz (10 kHz step)
87.5 MHz to 108 MHz (50 kHz step)
15.3 dBf (65 MHz to 74 MHz)
12.8 dBf (87.5 MHz to 108 MHz)
531 kHz to 1602 kHz
0.08 % (32 W, 1 kHz, 6 ohms, DIN
AUDIO)
230 V AC, 50/60 Hz
16.8 dBf 
531 kHz to 1602 kHz (9 kHz step)
530 kHz to 1710 kHz (10 kHz step)
0.08 % (40 W, 1 kHz, 6 ohms, DIN
AUDIO)
110 - 120 V/220 - 240 V AC
(switchable), 50/60 Hz
220 V AC, 60 Hz
240 V AC, 50/60 Hz
Rated: 64 W + 64 W (6 ohms, T.H.D. 
1 %, 1 kHz/DIN 45500)
Reference: 80 W + 80 W (6 ohms,
T.H.D. 10 %, 1 kHz/DIN 45324)
MUSIC POWER: 195 W +195 W
 AEP, UK, CIS models:
Rated: 80 W + 80 W (1 kHz, T.H.D. 
1 %, 6 ohms )
Reference: 100 W + 100 W (1 kHz, 
T.H.D. 10 %, 6 ohms)
 Except US, CND, AEP, 
 UK, CIS models:
Recording system
AC bias
Heads
Deck A: playback x 1
Deck B: recording/playback x 1,
erase x 1
CD PLAYER
Laser
Semiconductor laser (
λ = 780 nm)
Emission duration:
continuous
D/A converter
1 bit dual
Signal-to-noise ratio
85 dB (1 kHz, 0 dB)
Harmonic distortion
0.05 % (1 kHz, 0 dB)
Power consumption
 US, CND models:
 AEP, UK, CIS models:
100 W
93 W
– Continued on next page –
CX-JN5
2
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
0
  OR  DOTTED
LINE  WITH  MARK  
0
  ON  THE  SCHEMATIC  DIAGRAMS
AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.
The following caution label is located inside the unit.
This appliance is classified as
a CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT MARKING is
located on the rear exterior.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE  TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indica-
tion is 0.75 V, so analog meters must have an accurate low-
voltage scale. The Simpson 250 and Sanwa SH-63Trd are ex-
amples of a passive VOM that is suitable. Nearly all battery
operated digital multimeters that have a 2 V AC range are suit-
able.  (See Fig. A)
Fig. A.
Using an AC voltmeter to check AC leakage.
1.5 k
0.15 
µ
F
AC
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
ATTENTION  AU  COMPOSANT  AYANT  RAPPORT
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  
0
SUR  LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE
DES  PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ
DE  FONCTIONNEMENT.  NE  REMPLACER  CES  COM-
POSANTS  QUE  PAR  DES  PIÈCES  SONY  DONT  LES
NUMÉROS  SONT  DONNÉS  DANS  CE  MANUEL  OU
DANS  LES  SUPPLÉMENTS  PUBLIÉS  PAR  SONY.
Weight
 US, CND, E51, KR models:
 AEP, UK models:
 CIS model:
 E, MX, SP, TW models: 
Power consumption
With ECO mode on: 0.25 W
in standby mode
With ECO mode off: 20 W
Dimensions (W x H x D)
280 x 330 x 392.5 mm
(11 
1
/
8
 x 13 x 15 
1
/
2
 in.)
8.0 kg (17 lbs 10 oz)
Specifications and external appearance are subject to change
without notice.
COPYRIGHT
Check copyright laws relevant to recordings from discs, tuner
or tape for the country where the unit is to be used.
Licensed by BBE Sound, Inc. under USP4638258, 5510752
and 5736897.
7.2 kg 
7.6 kg 
7.9 kg 
105 W
• Abbreviation
AUS : Australian model
CND : Canadian model
E51 : Chilean and Peruvian models
KR
: Korean model
MX : Mexican model
SP
: Singapore model
TW
: Taiwan model
 Except US, CND, AEP, UK,
 CIS models:
CX-JN5
3
TABLE  OF  CONTENTS
1.
SERVICING NOTES
................................................
4
2.
GENERAL
Location of Controls .......................................................
7
3.
DISASSEMBLY
3-1. Disassembly Flow ...........................................................
9
3-2. Case (SIDE-L/R) ............................................................. 10
3-3. Case (Top) ....................................................................... 10
3-4. Tray Panel ........................................................................ 11
3-5. CD Mechanism Deck (CDM74-K6BD71AS,
CDM74S-K6BD71A, CDM74S-K6BD72) .................... 11
3-6. Front Panel Section ......................................................... 12
3-7. Mechanical Deck
(CWM43FF13, CWM43FR16, CWM43FR26) ............. 12
3-8. Rear Cabinet Section ...................................................... 13
3-9. PT Board, MAIN Board .................................................. 13
3-10. Table Assy ....................................................................... 14
3-11. Motor (TB) Board ........................................................... 14
3-12. Motor (LD) Board ........................................................... 15
3-13. Base Unit (BU-K6BD71A, BU-K6BD72) ..................... 15
3-14. Motor Gear Assy (Sled) (M701), BD Board .................. 16
3-15. Optical Pick-up (KSS-213D) .......................................... 16
4.
TEST  MODE
.............................................................. 17
5.
ELECTRICAL  ADJUSTMENTS
CD Section ...................................................................... 19
6.
DIAGRAMS
6-1. Block Diagram  – CD Section – ..................................... 20
6-2. Block Diagram  – TUNER/TAPE/PANEL Section – ..... 21
6-3. Block Diagram  – AMP/POWER SUPPLY Section – ... 22
6-4. Note for Printed Wiring Boards and
Schematic Diagrams ....................................................... 23
6-5. Printed Wiring Board  – BD Section –
(AEP, UK, CIS, E51, MX) .............................................. 24
6-6. Schematic Diagram  – BD Section –
(AEP, UK, CIS, E51, MX) .............................................. 25
6-7. Printed Wiring Board  – BD Section –
(US, CND, E, SP, TW, KR, AUS) ................................... 26
6-8. Schematic Diagram  – BD Section –
(US, CND, E, SP, TW, KR, AUS) ................................... 27
6-9. Printed Wiring Boards  – CHANGER Section – ............ 28
6-10. Schematic Diagram  – CHANGER Section – ................ 29
6-11. Schematic Diagram  – MAIN Section (1/4) – ................ 30
6-12. Schematic Diagram  – MAIN Section (2/4) – ................ 31
6-13. Schematic Diagram  – MAIN Section (3/4) – ................ 32
6-14. Schematic Diagram  – MAIN Section (4/4) – ................ 33
6-15. Printed Wiring Board  – MAIN Section – ...................... 34
6-16. Printed Wiring Board  – HP Section – ........................... 35
6-17. Schematic Diagram  – HP Section – .............................. 35
6-18. Printed Wiring Board  – PANEL Section – .................... 36
6-19. Schematic Diagram  – PANEL Section – ....................... 37
6-20. Printed Wiring Boards  – KEY Section – ....................... 38
6-21. Schematic Diagram  – KEY Section – ........................... 39
6-22. Printed Wiring Board  – PT Section –
(Except E, E51, SP, TW) ................................................. 40
6-23. Schematic Diagram  – PT Section –
(Except E, E51, SP, TW) ................................................. 41
6-24. Printed Wiring Board  – PT Section –
(E, E51, SP, TW) ............................................................. 42
6-25. Schematic Diagram  – PT Section –
(E, E51, SP, TW) ............................................................. 43
6-26. IC Pin Function Description ........................................... 47
7.
EXPLODED  VIEWS
7-1. Case Section .................................................................... 49
7-2. Front Panel Section-1 ...................................................... 50
7-3. Front Panel Section-2 ...................................................... 51
7-4. Front Panel Section-3 ...................................................... 52
7-5. Front Panel Section-4 ...................................................... 53
7-6. Chassis Section ............................................................... 54
7-7. CD Mechanism Deck Section-1 (CDM74-K6BD71AS,
CDM74S-K6BD71A, CDM74S-K6BD72) .................... 55
7-8. CD Mechanism Deck Section-2 (CDM74-K6BD71AS,
CDM74S-K6BD71A, CDM74S-K6BD72) .................... 56
7-9. CD Mechanism Deck Section-3  (CDM74-K6BD71A,
CDM74S-K6BD71A, CDM74S-K6BD72) .................... 57
7-10. Base Unit Section (BU-K6BD71A, BU-K6BD72) ........ 58
8.
ELECTRICAL  PARTS  LIST
............................... 59
• Abbreviation
AUS : Australian model
CND : Canadian model
E51 : Chilean and Peruvian models
KR
: Korean model
MX
: Mexican model
SP
: Singapore model
TW
: Taiwan model
Ver 1.1
4
CX-JN5
SECTION  1
SERVICING  NOTES
NOTES  ON  HANDLING  THE  OPTICAL  PICK-UP
BLOCK  OR  BASE  UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
LASER  DIODE  AND  FOCUS  SEARCH  OPERATION
CHECK
Carry out the “S curve check” in “CD section adjustment” and
check that the S curve waveforms is output three times.
• MODEL  IDENTIFICATION
– Back Panel –
MODEL
PART No.
US model
4-245-154-0
[]
Chilean and Peruvian models
4-245-154-2
[]
CIS model
4-245-154-4
[]
E, Singapore and Taiwan models
4-245-154-6
[]
Korean and Australian models
4-245-154-8
[]
AEP and UK models
4-245-280-0
[]
Mexican model (made in Mexico)
4-245-280-3
[]
Mexican model (made in China)
4-245-280-4
[]
Canadian model
4-245-280-5
[]
PART No.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 ˚C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges oc-
cur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
Ver 1.1
Page of 76
Display

Sony CX-JN5 / JAX-N5 / JAX-PK5 Service Manual ▷ Download

  • DOWNLOAD Sony CX-JN5 / JAX-N5 / JAX-PK5 Service Manual ↓ Size: 6.54 MB | Pages: 76 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony CX-JN5 / JAX-N5 / JAX-PK5 in PDF for free, which will help you to disassemble, recover, fix and repair Sony CX-JN5 / JAX-N5 / JAX-PK5 Audio. Information contained in Sony CX-JN5 / JAX-N5 / JAX-PK5 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.