DOWNLOAD Sony CX-JN101 / JAX-N101 Service Manual ↓ Size: 5.75 MB | Pages: 70 in PDF or view online for FREE

5

3

Pull-out the disc tray.

1

Remove the case (side-L).

2

Turn the loading gear in the direction of arrow 

A

.

A

6

MAIN board (CN691)

Connect wire (flat type) (19 core) to
MAIN board (CN691) and BD board (CN710).

BD board (CN710)

Connect wire (flat type) (13 core) to
PANEL board (CN601) and mechanical deck.

PANEL board (CN601)

MAIN board (CN301)

MAIN board (CN302) 

7

This section is extracted from
instruction manual.

1

Rotates the CD trays.

2

6

Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.

3

Selects various modes (ECO and Repeat/Shuffle/
Programed playback or Dimmer) when used in
combination with ENTER and MULTI JOG.

4

Fixes the modes and the time (ECO, Repeat/Shuffle/
Programed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.

Selects CD function.

@

Receives a signal from the remote.

#

Adjusts the volume.

$

Enhances high frequency sound.

%

Emphasizes low frequency sound.

^

Produces rich and clear low frequency sound.

& c

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.

s

CD and Tape: stops playback.
Tuner: clears a station preset.

f

g

Refer to the pages indicated in parentheses for details.

5

When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
ECO and Dimmer: selects the mode.

6

Adjusts the microphone volume.

Connects the microphone here.

7

Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.

8

Starts dubbing a whole tape.

w

Starts recording.

9

Selects a disc.

0 z

Opens or closes the disc compartment.

!

Selects Tape function, and deck A or B.

Selects Tuner function and the radio band.

Selects the function of external equipment connected to
VIDEO/AUX jacks.

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.
Tuner: stores the received station in to preset.

Refer to the pages indicated in parentheses for details.

1

Ω

Plug in the supplied AM and FM antennas here.

2

Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.

Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".

3 #

Connect the speaker cord of the supplied front speakers
here.

4

Switches AC voltage between 110 - 120V and 220 - 240V.
Make sure it matches your local voltage.

5

8

Buttons with the same or similar names with the main unit
basically have the same function.

1

2

CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.

The numbered buttons take on these functions below when pressed
with SHIFT held down

:

Enters AI Edit Recording or Programed Edit Recording
mode when pressed in stop mode.

Selects Tuner function and the radio band.

Switches between stereo or monaural FM reception.

Selects a Multiplex mode.

3 r

t

CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.

4

Selects Shuffle or Programed playback in CD function.

 Enters CD repeat playback mode.

5

Enters timer setting mode.

Selects timer playback, timer recording or timer off.

6

Displays the time and the remaining time for CD.

7

Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press  SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
You can first press SHIFT, then a numbered button.

8

Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).

9

Select a disc.

0 c

d

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.

s

CD and Tape: stops playback.

f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.

!

Switches the sleep-timer on/off and selects the duration.

@

+

-

Adjusts the volume.

#

Selects BASS or TREBLE setting mode

Clears a track of the CD programed playback and a Radio
preset station.

The buttons not explained above (

 N, M and

) do not operate for this unit.

Refer to the pages indicated in parentheses for details.

Use the remote.

Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.

Press  r  or  t  repeatedly until "CLOCK
SET

" appears in the display and then press

ENTER.

Press r or t repeatedly to set the hour
and then press ENTER.

Press r or t repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.

•MULTI JOG is also available in place of r or t.

To display the time
Press DISPLAY on the remote. The time will be displayed for
6 seconds.

Tip:
"AM 12:00" indicates midnight and "PM 12:00" noon.

If "- -:- -" appears when the unit is turned off
There has been a power interruption. Re-set the clock.