DOWNLOAD Sony CX-JE3 / JAX-E3 Service Manual ↓ Size: 5.69 MB | Pages: 64 in PDF or view online for FREE

5

main board (CN691)

Connect wire (flat type) (19 core) to
main board (CN691) and BD board (CN710).

BD board (CN710)

Connect wire (flat type) (13 core) to
panel board (CN601) and mechanical deck.

panel board (CN601)

main board (CN301)

6

This section is extracted from
instruction manual.

1

Rotates the CD trays.

2

6

Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.

3

Selects various modes (ECO and Repeat/Shuffle/
Programmed playback, etc.) when used in combination
with ENTER and MULTI JOG.

4

Fixes the modes and the time (ECO, Repeat/Shuffle/
Programmed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.

5

When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programmed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.

6

Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.

7

Starts dubbing a whole tape.
w

Starts recording.

8

Selects a disc.

9 z

Opens or closes the disc compartment.

0

Selects Tape function, and deck A or B.

Selects Tuner function and the radio band.

Selects the function of external equipment connected to
VIDEO/AUX jacks.

Selects CD function.

!

Receives a signal from the remote.

@

Adjusts the volume.

1

Ω

Plug in the supplied AM and FM antennas here.

2

Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.

Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".

3 #

Connect the speaker cord of the supplied front speakers
here.

4

#

Enhances high frequency sound.

$ c

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
s

CD and Tape: stops playback.
Tuner: clears a station preset.
f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a

CD and Tape: pauses playback.
Tuner: stores the received station in to preset.

%

Emphasizes low frequency sound.

^

Produces rich and clear low frequency sound.

&

Displays the time and the remaining time for CD.

k

i

Selects a previous album or a succeeding album with
MP3-CDs.

Displays a program type for RDS (Radio Data System)

7

Buttons with the same or similar names with the main unit
basically have the same function.

1

2

CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.

The numbered buttons take on these functions below when pressed
with SHIFT held down

:

Enters AI Edit Recording or Programmed Edit Recording
mode when pressed in stop mode.

Selects Tuner function and the radio band.

Changes the spectrum analyzer display.

Switches between stereo or monaural FM reception.

3 r

t

CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.

4

M

N

Selects a previous album or a succeeding album.

5

Selects Shuffle or Programmed playback in CD function.

 Enters CD repeat playback mode.

6

Enters timer setting mode.

Selects timer playback, timer recording or timer off.

7

8

Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.

9

Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).

0

Select a disc.

! c

d

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.

s

CD and Tape: stops playback.

f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.

@

Switches the sleep-timer on/off and selects the duration.

#

+

-

Adjusts the volume.

$

Selects BASS or TREBLE setting mode

Clears a track of the CD programmed playback and a
Radio preset station.

The button not explained above (

) does not

operate for this unit.

Use the remote.

1 Press CLOCK/TIMER/SET.

Go to step 3 when the time appears and the 'hour' flashes.

2 Press r or t repeatedly until "CLOCK

SET

" appears in the display and then press

ENTER.

3 Press r or t repeatedly to set the hour

and then press ENTER.

4 Press r or t repeatedly to set the minute

and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.

•MULTI JOG is also available in place of r or t.

To display the time
Press DISPLAY on the remote. The time will be displayed for
6 seconds.

If "- -:- -" appears when the unit is turned off
There has been a power interruption. Re-set the clock.

8

• This set can be disassembled in the order shown below.

Set

3-2. CASE

(SIDE-L/R)
(Page 9)

3-3. CASE (TOP)

(Page 9)

3-4. TRAY PANEL

(Page 10)

3-6. FRONT PANEL

SECTION
(Page 11)

3-8. REAR CABINET

SECTION
(Page 12)

3-7. MECHANICAL

DECK
(CWM43FF13)
(Page 11)

3-9. PT BOARD,

MAIN BOARD
(Page 12)

3-14. MOTOR GEAR ASSY (SLED) (M701),

BD BOARD
(Page 15)

3-13. BASE UNIT

(BU-K6BD71A)
(Page 14)

3-10. TABLE ASSY

(Page 13)

3-11. MOTOR (TB)

BOARD
(Page 13)

3-12. MOTOR (LD)

BOARD
(Page 14)

3-5. CD MECHANISM DECK

(CDM74S-K6BD71A)
(Page 10)

The process described in      can be performed in any order.

Without completing the process described in      , the next process can not be performed.