Sony CMT-RB5 / HCD-RB5 Service Manual ▷ View online
5
This section is extracted
from instruction manual.
from instruction manual.
Step 2: Setting the time
You must set the time beforehand to use the timer
functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system is used for illustration
purposes.
functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system is used for illustration
purposes.
>
M
m
N
X
x
?/1
.
2
1
4,6
4,6
4
3,5
DISPLAY
m
1
Turn on the system.
2
Press CLOCK/TIMER SET.
The clock appears and the hour indication
flashes.
flashes.
0 : 0 0
3
Press ./> to set the hour.
4
Press ENTER or M.
The minute indication flashes.
1 1 : 0 0
5
Press ./> to set the minute.
6
Press ENTER.
The clock starts.
If you made a mistake
Press m/M repeatedly until the incorrect item
flashes, then set it again.
flashes, then set it again.
To change the preset time
You can change the preset time while the system
is off.
is off.
1 Press DISPLAY to display the clock.
2 Press CLOCK/TIMER SET.
3 Repeat steps 3 to 6 of “Setting the time.”
2 Press CLOCK/TIMER SET.
3 Repeat steps 3 to 6 of “Setting the time.”
Tips
• The upper dot of the colon flashes for the first 30
seconds, and the lower dot flashes for the last 30
seconds of each minute.
seconds of each minute.
• Each time you press DISPLAY while the system is
off, the display switches between no display and the
clock display.
clock display.
6
SECTION 2
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
2-1. CASE (TOP)
2-2. FRONT PANEL ASSY
9
eight screws
(BVTP3
(BVTP3
×
10)
q;
one screw
(BVTP3
(BVTP3
×
10)
8
case (left)
2
plate top
5
case (right)
qs
back panel
qa
case (top)
6
two case screws
1
four screws
3
two case screws
4
one screw
(BVTP3
(BVTP3
×
10)
7
one screw
(BVTP3
(BVTP3
×
10)
2
connector
(CN202)
(CN202)
6
front panel assy
5
two screws
(BVTP3
(BVTP3
×
8)
3
one screw
(BVTP3
(BVTP3
×
8)
4
lug
1
wire (flat type)(23 core)
(CN441)
(CN441)
7
2-3. CD MECHANISM DECK (CDM55C-K6BD38)
2-4. BASE UNIT (BU-K6BD38)
2
connector
(CN1)
(CN1)
3
screw
(BVTP3
(BVTP3
×
8)
1
wire (flat type)
(19 core)(CN401)
4
CD mechanism deck
(CDM55C-K6BD38)
(CDM55C-K6BD38)
1
floating screw
(PTPWHM2.6)
(PTPWHM2.6)
2
base unit
(BU-K6BD38)
(BU-K6BD38)
8
2-6. CAM (CDM55C-K6BD38)
2-5. LOADING BOARD
2
belt (CDM55)
B
3
Pull the tray pushing
B
.
4
two screws
(BTP2.6
(BTP2.6
×
6)
5
LOADING board
1
Rotate the gear(B) in
the direction of arrow
the direction of arrow
A
.
A
2
lever (SW)
1
torsion spring
6
gear (B)
3
spacer (55)
4
pulley (LDG)
5
gear (A)
7
roller
8
cam (CDM55)
Click on the first or last page to see other CMT-RB5 / HCD-RB5 service manuals if exist.