DOWNLOAD Sony CMT-M11C Service Manual ↓ Size: 50.04 KB | Pages: 6 in PDF or view online for FREE

– 3 –

How to Use Table 1-1.:
Use table 1-1. by converting hexadecimal number of each digit
into decimal number (see table 1-2).  If an error occurred by two
or more causes, respective numbers are added.

Hexadecimal

Decimal

Hexadecimal

Decimal

0

0000

8

1000

1

0001

9

1001

2

0010

A

1010

3

0011

B

1011

4

0100

C

1100

5

0101

D

1101

6

0110

E

1110

7

0111

F

1111

Table 1-2. Hexadecimal number - Decimal number Conversi

Example 1: If “42” is displayed

Higher bit: 4=0100 

→

 b6

Lower bit: 2=0010 

→

 b1

This case shows that retry was made due to combined causes of
“CLV unlock” and “ADIP error ”.

Example 2: If “A2” is displayed

Higher bit: A=1010 

→

 b7 + b5

Lower bit: 2=0010 

→

 b1

This case shows that retry was made due to combined causes of
“cannot access”, “IV-R”, and “ADIP error ”.

Note: Some sets may display “MD ERR TOC” depending on the

contents of CD disc to be recorded.
In this case, retry aging using another CD disc.

Error Message

Description

1

MD ERR NO DISC

TOC of MD cannot be read (disc
error, etc.)

2

MD ERR A-ERASE

MD all erasing failed
(premaster, protect, or disc
error)

3

MD ERR R-PAUSE

Pause of MD recording failed

4

MD ERR D-INPUT

MD digital input is not locked

5

MD ERR PLAY

Last music of MD cannot be
played (access error)

6

MD ERR TOC

TOC content of MD is erroneous
(total tracks are wrong)

7

CD ERR FOCUS

CD focusing failed

8

CD ERR GFS

CD GFS failed

9

CD ERR TOC

16 seconds elapsed after TOC of
CD was read

10

CD ERR SEARCH

16 seconds elapsed after CD was
searched

11

CD ERR TRY1 SW

Switch in CD tray 1 is faulty

12

CD ERR TRY2 SW

Switch in CD tray 2 is faulty

13

CD ERR TRY3 SW

Switch in CD tray 3 is faulty

14

CD ERR CARRIER

Carrier operation did not com-
plete within the specified time

15

CD ERR GEAR

Gear operation did not complete
within the specified time

16

CD ERR CHUCK

Chucking did not complete
within the specified time

17

CD ERR TRY IN

Tray was not closed within the
specified time

18

CD ERR TRY OUT

Tray was not opened within the
specified time

19

CD ERR ServoOK

This massage is displayed when
the aging is tried through CD
aging is disabled due to other
than above causes.

Table 1-3. Error Messages

– 4 –

Aging mode start

Select MD function

and turn power on

MD TOC reading OK?

Execute MD all erase

Blank disc?

Function changes to CD, and
CD sync. dubbing stands by

Standby OK?

Start sync. dubbing

Play last music of CD disc 1 for
10 sec, then execute CD open/
close operation

Open/close OK?

A

Error message 7 to 19

NO

Error message 3 and 4

NO

Error message 2

NO

Error message 1

NG

16 cycles completed?

C

D

YES

YES

OK

NO

YES

YES

– 5 –

A

Play last music of CD disc 2
for 10 sec, then execute CD
open/close operation

Open/close OK?

Play last music of CD disc 3
for 10 sec, then execute CD
open/close operation

Open/close OK?

Function changes to MD

Play last music of MD for 
3 seconds

Play OK?

Turn power off, then write
MD TOC

Aging cycles are displayed
for 2 seconds

Turn power on and read
MD TOC

B

Error message 5

Error message 7 to 19

NO

NO

B

MD TOC reading OK?

One cycle end

4 cycles completed

Execute CD sync. dubbing
for 10 minutes

Sync. dubbing completed?

D

Error message 1 to 6

NG

Error message 1 to 19

NO

YES

YES

OK

NO

C

YES

YES

YES

Error message 7 to 19

NO

Note: For the error messages, see “table 1-3. Error Message”

 on page 3.

– 6 –

97C0566-1

Printed in Japan   © 1997. 3

•

Items marked “*” are not stocked since they are seldom required for rou-
tine service.
Some delay should be anticipated when ordering these items.

•

Abbreviation
HK: Hong Kong
MY: Malaysia
SP: Singapore

Ref. No.

Part No.

Description

Remark

ACCESSORIES & PACKING MATERIALS

********************************

1-473-897-11 COMMANDER, STANDARD (RM-SM11)
1-501-659-41 ANTENNA (FM) (Except AEP, UK)
1-501-721-11 ANTENNA (LOOP)
1-501-804-11 ANTENNA (FM) (AEP, UK)
1-558-271-11 CORD, CONNECTION

1-574-264-11 CORD, OPTICAL PLUG
1-775-761-11 CORD, SPEAKER
3-707-584-41 COVER, BATTERY (For RM-SM11)
3-859-822-11 MANUAL, INSTRUCTION (ENGLISH, FRENCH)

 (Except AEP, UK)

3-859-822-21 MANUAL, INSTRUCTION (SPANISH, CHINESE)

(E, HK, SP, MY)

3-859-822-31 MANUAL, INSTRUCTION (ENGLISH, FRENCH)

(AEP, UK)

3-859-822-41 MANUAL, INSTRUCTION

(SPANISH, PORTUGUESE) (AEP, UK)

3-859-822-51 MANUAL, INSTRUCTION (GERMAN, ITALIAN)

(AEP, UK)

3-859-822-61 MANUAL, INSTRUCTION (DUTCH, SWEDISH)

(AEP, UK)

*

4-970-587-21 PLATE (PIN JACK 2P), INDICATION (SA-N11)

*

4-977-364-01 COVER (PIN JACK 2P) (HMD-M11)