Sony CMT-L1 / HCD-L1 Service Manual ▷ View online
17
HCD-L1
3-17. Base Unit (BU-31BD63A)
3-18. Holder Assy, Sled Motor Assy
5
base unit
(BU-31BD)
2
screw
(+PTPWH M2.6)
cam
shaft
SPT pulley assy
shaft
1
1
4
3
Rotate the SPT pulley assy in the direction of to move the Base unit shaft
forward.
forward.
(BLK)
9
two screws
(+PTPWH M2.6)
8
screw
(+PTPWH M2.6)
qs
screw
(+P 2
×
3)
qd
sled motor assy
q;
hook
qa
base unit
holder assy
6
tension coil spring (holder)
7
tension coil spring (holder)
5
BD board
1
Remove solder
(two portions ).
2
Remove solder
(two portions ).
4
flxible board
3
screw
(+BTP 2
×
8)
(RED)
18
HCD-L1
3-19. RTR Pulley Assy
3-20. SPT Pulley Assy
3
RTR pulley assy
RTR pulley assy
1
claw
2
2
Disengage the claw and rotate the RTR pulley assy in the direction of , and
remove your hands at the position where the shaft agrees with the hole shape on the
chassis.
remove your hands at the position where the shaft agrees with the hole shape on the
chassis.
2
SPT pulley assy
SPT pulley assy
1
1
When installing, align the protruded portion of the KT gear with groove of the SPT
pulley assy.
pulley assy.
Rotate the SPT pulley assy in the direction of , and remove your hands
at the position where the shaft agrees with the hole shape on the chassis.
at the position where the shaft agrees with the hole shape on the chassis.
19
HCD-L1
[Key Check Mode]
* Keyboard check.
Procedure:
1.
Procedure:
1.
Press the ?/1 button to turn the set ON.
2.
To enter the test mode, press three buttons DISPLAY , NX
and > simultaneously.
and > simultaneously.
3.
In the key check mode, the fluorescent indicator displays
“KEY00”. Each time a button is pressed, “KEY00” value
increases. However, once a button is pressed, it is no longer
taken into account.
“KEY00”. Each time a button is pressed, “KEY00” value
increases. However, once a button is pressed, it is no longer
taken into account.
4.
To exit from this mode, press three buttons DISPLAY , NX
and > simultaneously.
and > simultaneously.
[Version Display Mode]
* The version or destination is displayed.
Procedure:
1.
Procedure:
1.
Press the ?/1 button to turn the set ON.
2.
To enter the test mode, press three buttons DISPLAY , VOL+
and VOL– simultaneously.
and VOL– simultaneously.
3.
The model name and destination are displayed.
4.
Press the DISPLAY button. The STR version is displayed.
5.
Press the DISPLAY button again. The CD version is displayed.
6.
Press the DISPLAY button. The model name and destination
are displayed again.
are displayed again.
7.
To exit from this mode, press the ?/1 button to turn off the set.
[FL Tube Test Mode]
* All fluorescent segments are tested.
Procedure:
1.
Procedure:
1.
Press the ?/1 button to turn the set ON.
2.
To enter the test mode, press three buttons DISPLAY , NX
and VOL– simultaneously.
and VOL– simultaneously.
3.
All segments are turned on.
4.
Press the DISPLAY button. All segments are turned off.
5.
Press the DISPLAY button. Confirm the pattern of segments.
6.
Press the DISPLAY button. Confirm the pattern of segments.
7.
Every pressing of the DISPLAY button turns on each segment
one after another in the same order.
one after another in the same order.
8.
To exit from this mode, press the ?/1 button to turn off the set.
[Amp Test Mode]
* Combinatin of preset equalizer and volume is changed for the
amplifier test.
Procedure:
1.
amplifier test.
Procedure:
1.
Press the ?/1 button to turn the set ON.
2.
To enter the test mode, press three buttons . , NX and
> simultaneously.
> simultaneously.
3.
The message “7[TESTMIN]” appears.
4.
Press the DISPLAY and NX buttons simultaneously.
5.
The message “8[TESTMID]” appears.
6.
The messages “9[TESTMAX]”, “10[TESTSUR]”, “7[TESTMIN]”,
, , are changed by every pressing of the DISPLAY and NX
buttons simultaneously.
, , are changed by every pressing of the DISPLAY and NX
buttons simultaneously.
7.
Volume level is changeable at three steps as “VOLUME MIN”,
“VOLUME 21”, “VOLUME MAX” by pressing VOL+ or
VOL– button.
“VOLUME 21”, “VOLUME MAX” by pressing VOL+ or
VOL– button.
8.
In this test mode, the tuning mode is set to the preset mode.
9.
To exit from this mode, press the ?/1 button to turn off the set.
[Forced Reset]
* All micro-processors are forced to reset at the same time.
Procedure:
1.
Procedure:
1.
Press the ?/1 button to turn the set ON.
2.
Press three buttons DISPLAY , TUNER/BAND and
FUNCTION simultaneously.
FUNCTION simultaneously.
3.
The fluorescent indicator tube displays the message “COLD
RESET” and the set is reset. Then the set is turned off.
RESET” and the set is reset. Then the set is turned off.
[CD Ship Position]
Procedure:
1.
1.
Press the ?/1 button to turn the set ON.
2.
Press the FUNCTION button for the setting CD.
3.
Press three buttons . , VOL+ and VOL– simultaneously.
4.
The fluorescent indicator tube displays the message
“STANDBY” and CD is set to the shipment position. Then the
set is turned off.
“STANDBY” and CD is set to the shipment position. Then the
set is turned off.
[Aging Mode]
Procedure:
1.
1.
Press the ?/1 button to turn the set ON.
2.
Insert the disc.
3.
Select the FUNCTION to CD.
4.
To enter the test mode, press three buttons . , TUNER/BAND
and Z OPEN simultaneously.
and Z OPEN simultaneously.
5.
Aging operation starts automatically.
6.
The CD cover opens ,closes and the first track is played. Then
the last track is played.
the last track is played.
7.
The CD cover opens again, and the message “AGIN00000001”
is displayed. This value is cycle times of aging operation and
displays hexadecimal data.
is displayed. This value is cycle times of aging operation and
displays hexadecimal data.
8.
The cover closes and aging operation is continued.
9.
To exit from this mode, press the ?/1 button to turn off the set.
PROGRAM REP
TEXT
TRACK TUNED
MONO
1
DISC
STEREO
AUTO PRESET
DSG
SHUFFLE
DAILY
SLEEP
c
REP
TEXT
TRACK
STEREO
AUTO
DSG
SHUFFLE
DAILY
PROGRAM TUNED
MONO
1
DISC
PRESET
SLEEP
c
SECTION 4
TEST MODE
20
HCD-L1
[Error History Display Mode]
Procedure:
Setting Method of Test Mode
1.
Setting Method of Test Mode
1.
Press the ?/1 button to turn the set ON.
2.
Select the FUNCTION to CD.
3.
To enter the test mode, press three buttons . , VOL+ and
> simultaneously.
> simultaneously.
4.
Confirm to display “dvt ERR CODE”.
5.
Press the Z OPEN button.
Releasing Method of Test Mode
1.
1.
Press the x button to display “dvt ERR CODE”.
2.
Press the x button.
Menu Selection of Error History Display Mode
1.
1.
Select the operation in the menu by pressing the . or >
button.
button.
2.
Press the Z OPEN button. The menu is selected. If returning
to the menu again, press the x button.
to the menu again, press the x button.
Display of Times of Error
* Number of times of mechanism error and no disc error is displayed
in hexadecimal.
* Number of times of mechanism error and no disc error is displayed
in hexadecimal.
DISPLAY : “ Emc=**Edc=## “
**
**
: number of times of mechanism error (hexadecimal)
##
: number of times of no disc error (hexadecimal)
Display of Mechanism Error History
1.
1.
Select the operation in the menu by pressing the . or >
button to display “dvt ECODE MEC”.
button to display “dvt ECODE MEC”.
2.
Press the Z OPEN button.
3.
Select the mechanism error code by pressing the . or >
button.
button.
DISPLAY : “ E**M##%%0000 “
**
: order of mechanism error happens (hexadecimal)
00 : the newest error
09 : the error ten times before
09 : the error ten times before
##
: completion of an initialization (hexadecimal)
ff
: completion
others : not completed
%% : condition of CDM operation when the trouble happened
(hexadecimal)
00 : during an initialization
1x : during opening (x : not fixed)
16 to 19 : during a kick by falure of opening
2x : completion of opening
28 : completion of opening under the condition of no disc
3x : during close request
4x : during open request
5x : during closing
6x : during chucking
80 : during releasing
9x : during operation of BU down
ax : during operation of shutter opening or closing
b0 : during BU up request
c0 : during BU down request
dx : during operation of BU up
00 : during an initialization
1x : during opening (x : not fixed)
16 to 19 : during a kick by falure of opening
2x : completion of opening
28 : completion of opening under the condition of no disc
3x : during close request
4x : during open request
5x : during closing
6x : during chucking
80 : during releasing
9x : during operation of BU down
ax : during operation of shutter opening or closing
b0 : during BU up request
c0 : during BU down request
dx : during operation of BU up
0000 : fixed
Reset of Mechanism Error History
1.
1.
Select the operation in the menu by pressing the . or >
button to display “dvt ECONT0 MEC”.
button to display “dvt ECONT0 MEC”.
2.
Press the CD PLAY button. Mechanism error history is reset.
Display of No Disc Error History
1.
1.
Select the operation in the menu by pressing the . or >
button to display “dvt ECODE BU”.
button to display “dvt ECODE BU”.
2.
Press the Z OPEN button.
3.
Select the no disc code by pressing the . or > button.
DISPLAY : “ E**D##%%@@&& “
**
**
: order of no disc happens (hexadecimal)
00 : the newest
09 : ten times before
09 : ten times before
##
: description of the trouble (hexadecimal)
01 : focus NG
02 : GFS NG
03 : time-over of starting
04 : continuous unlock of focus
05 : no input of Q-codes in fixed time
02 : GFS NG
03 : time-over of starting
04 : continuous unlock of focus
05 : no input of Q-codes in fixed time
%% : condition when the trouble happened (hexadecimal)
01 : during shipment position processing
02 : during power off processing
03 : during processing of initialization
04 : during stop condition
05 : during stop processing
06 : during process of starting
07 : during process of TOC reading
08 : during search operation
09 : during playback
0a : during pause
0b : during playback manual searching
0c : during pause manual searching
02 : during power off processing
03 : during processing of initialization
04 : during stop condition
05 : during stop processing
06 : during process of starting
07 : during process of TOC reading
08 : during search operation
09 : during playback
0a : during pause
0b : during playback manual searching
0c : during pause manual searching
@@ : do not care
&& : rotating speed of a disc when the trouble happened
&& : rotating speed of a disc when the trouble happened
(hexadecimal)
01 : x1
02 : x2 (double speed)
03 : x4
01 : x1
02 : x2 (double speed)
03 : x4
DISPLAY OF TIMES OF ERROR
DISPLAY OF MECHANISM ERROR HISTORY
RESET OF MECHANISM ERROR HISTORY
RESET OF NO DISC ERROR HISTORY
DISPLAY OF NO DISC ERROR HISTORY
RESET OF ERROR HISTORY
" Emc=**Edc=## "
" dvt ECODE MEC "
" dvt ECNT0 MEC "
" dvt ECNT0 ALL "
" dvt ECNT0 BU "
" dvt ECODE BU "
Click on the first or last page to see other CMT-L1 / HCD-L1 service manuals if exist.