Sony CMT-HX50BTR / CMT-HX70BTR / CMT-HX80R / CMT-HX90BTR / HCD-HX50BTR / HCD-HX70BTR / HCD-HX80R / HCD-HX90BTR Service Manual ▷ View online
HCD-HX50BTR/HX70BTR/HX80R/HX90BTR
13
SECTION 4
TEST MODE
COLD RESET
The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning the
set to the customer.
Procedure:
1. Press three buttons of [
The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning the
set to the customer.
Procedure:
1. Press three buttons of [
x
/CANCEL], [DSGX] and [
?
/
1
] si-
multaneously.
2. The system is reset and becomes standby states.
COMMON TEST MODE
This mode is used to check operations of amplifi er.
Procedure:
1. Press the [
This mode is used to check operations of amplifi er.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press three buttons of [
x
/CANCEL], [ENTER] and [
Z
] si-
multaneously.
3. When the COMMON test mode is activated, “AUDIO IN”
is displayed on the fl uorescent indicator tube and “c PLAY
SLEEP” blink on the fl uorescent indicator tube.
SLEEP” blink on the fl uorescent indicator tube.
4. Each time [EQ] button on the remote commander is pressed,
the display changes starting “TONE MAX”, “TONE MIN”
and “TONE FLAT” this order.
and “TONE FLAT” this order.
5. Turn the [VOLUME] knob counterclockwise, “VOLUME
MIN” is displayed on the fl uorescent indicator tube. Turn the
[VOLUME] knob clockwise, “VOLUME MAX” is displayed
on the fl uorescent indicator tube.
[VOLUME] knob clockwise, “VOLUME MAX” is displayed
on the fl uorescent indicator tube.
6. To release this mode, press the [
?
/
1
] button.
PANEL TEST MODE
This mode is used to check the fl uorescent indicator tube, LED,
model, destination, software version and key.
Procedure:
1. Press the [
This mode is used to check the fl uorescent indicator tube, LED,
model, destination, software version and key.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press three buttons of [
x
/CANCEL], [DSGX] and [
Z
] simul-
taneously.
3. All segments on the fl uorescent indicator tube, [STANDBY]
LED and [BLUETOOTH OPR] LED (HX50BTR/HX70BTR/
HX90BTR only) light up.
HX90BTR only) light up.
4. Press the [DSGX] button, the model and destination are dis-
played on the fl uorescent indicator tube.
5. Press the [DSGX] button again, MC version is displayed on
the fl uorescent indicator tube.
6. Each time [DSGX] button is pressed, the display changes
starting from MC version, GC version, USBL version , USBM
version, BT version (HX50BTR/HX70BTR/HX90BTR only),
CLA version, CD version, CDD version, CDMA version,
CDMB version, BDA version, BDB version, ST version, TA
version and TM version this order, and returns to the MC ver-
sion display.
version, BT version (HX50BTR/HX70BTR/HX90BTR only),
CLA version, CD version, CDD version, CDMA version,
CDMB version, BDA version, BDB version, ST version, TA
version and TM version this order, and returns to the MC ver-
sion display.
7. When [SEARCH] button is pressed while the MC version is
displayed, year, month and day of the software creation is dis-
played. When [SEARCH] button is pressed again, the display
returns to the MC version display.
played. When [SEARCH] button is pressed again, the display
returns to the MC version display.
8. Press the [ENTER] button, the key test mode is activated and
“K 0 V0” is displayed on the fl uorescent indicator tube.
9. Each time a button is pressed, “K” value increases. However,
once a button is pressed, it is no longer taken into account.
All keys are pressed, display becomes “K17” (HX80R) or
“K18” (HX50BTR/HX70BTR/HX90BTR).
“K18” (HX50BTR/HX70BTR/HX90BTR).
10. “V” value increases 2, 4, 6 ... if turn the [VOLUME] knob
clockwise, or it decreases 8, 6, 4 ... if turn the knob counter-
clockwise
clockwise
11. To release this mode, press three buttons in the same manner as
step 2, or disconnect the power cord.
TUNER STEP CHANGE
(HX50BTR: Canadian, Chilean, Peruvian, Mexican, Bra-
zilian, Singapore, Argentina and Korean models)
A step of AM tuning interval can be changed over between 9 kHz
or 10 kHz.
Procedure:
1. Press the [
(HX50BTR: Canadian, Chilean, Peruvian, Mexican, Bra-
zilian, Singapore, Argentina and Korean models)
A step of AM tuning interval can be changed over between 9 kHz
or 10 kHz.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [TUNER/BAND] button to select “AM”.
3. Press the [
3. Press the [
?
/
1
] button again to turn the power off.
4. Press two buttons of [TUNER/BAND] and [
?
/
1
] simultane-
ously.
5. The message “AM 9kHz Step” or “AM 10kHz Step” is dis-
played on the fl uorescent indicator tube and thus the tuning
interval is changed over.
interval is changed over.
CD SHIP MODE
This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the [
This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [FUNCTION] button to select “CD”.
3. Press two buttons of [SEARCH] and [
3. Press two buttons of [SEARCH] and [
?
/
1
] simultaneously.
4. After the “STANDBY” display blinks, “LOCK” is displayed
on the fl uorescent indicator tube, the ship mode is set.
CD SHIP MODE & MEMORY CLEAR
This mode is used to perform CD ship mode and cold reset simul-
taneously.
Procedure:
1. Press the [
This mode is used to perform CD ship mode and cold reset simul-
taneously.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press three buttons of [SEARCH], [DSGX] and [
?
/
1
] simulta-
neously.
3. After the “STANDBY” display blinks, “LOCK” is displayed
on the fl uorescent indicator tube the ship mode is set and the
system is reset.
system is reset.
ANTITHEFT LOCK MODE
This mode is used to unable to take sample disc out of disc tray in
the shop.
Procedure:
1. Press the [
This mode is used to unable to take sample disc out of disc tray in
the shop.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [
Z
] button to open the disc tray and set the CD disc.
3. Press the [
Z
] button to close the disc tray.
4. Press two buttons of [
x
/CANCEL] and [
Z
] for 5 seconds.
5. The message “LOCKED” is displayed on the fl uorescent indi-
cator tube and the disc tray is locked. (Even if pressing the [
Z
]
button, the message “LOCKED” is displayed on the fl uores-
cent indicator tube and the disc tray is locked)
cent indicator tube and the disc tray is locked)
6. To release from this mode, press two buttons of [
x
/CANCEL]
and [
Z
] for 5 seconds.
7. The message “UNLOCKED” is displayed on the fl uorescent
indicator tube and the disc tray is unlocked.
CD POWER MANAGE
This mode is used to changed over CD power on/off for decreasing
of reception noise in the tuner mode.
Procedure:
1. Press the [
This mode is used to changed over CD power on/off for decreasing
of reception noise in the tuner mode.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [FUNCTION] button to select “CD”.
3. Press the [
3. Press the [
?
/
1
] button again to turn the power off.
4. Press two buttons of [
x
/CANCEL] and [
?
/
1
] simultaneously.
5. The message “CD POWER ON” or “CD POWER OFF” is dis-
played on the fl uorescent indicator tube, and CD power on/off
is changed over in the tuner mode.
is changed over in the tuner mode.
Ver. 1.1
HCD-HX50BTR/HX70BTR/HX80R/HX90BTR
14
CD SERVICE MODE
This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the optical pick-up.
Procedure:
1. Press the [
This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the optical pick-up.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [FUNCTION] button to select “CD”.
3. Press three buttons of [SEARCH], [ +] and [
3. Press three buttons of [SEARCH], [ +] and [
Z
] simultane-
ously, the message “SERVICE MODE” is displayed on the
fl uorescent indicator tube.
fl uorescent indicator tube.
4. Press the [ –] button to move the optical pick-up to inside
track and the message “SLED IN” is displayed on the fl uores-
cent indicator tube, or press the [ +] button to outside track
and the message “SLED OUT” is displayed on the fl uorescent
indicator tube.
cent indicator tube, or press the [ +] button to outside track
and the message “SLED OUT” is displayed on the fl uorescent
indicator tube.
5. Press the [DSGX] button, “LD ON” or “LD OFF” is displayed
on the fl uorescent indicator tube. Each time [DSGX] button is
pressed, laser diode on/off is changed over.
pressed, laser diode on/off is changed over.
6. To release this mode, press the [
?
/
1
] button.
BT TEST MODE
(XH50BTR/HX70BTR/HX90BTR)
This mode is used to check the fi rmware version and address of
bluetooth module.
Procedure:
1. Press the [
(XH50BTR/HX70BTR/HX90BTR)
This mode is used to check the fi rmware version and address of
bluetooth module.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [FUNCTION] button to select “BLUETOOTH”.
3. Press three buttons of [SEARCH], [FUNCTION] and [BLU-
3. Press three buttons of [SEARCH], [FUNCTION] and [BLU-
TOOTH OPR] simultaneously, the message “BT Test” is dis-
played on the fl uorescent indicator tube. Then, the display is
automatically changed to the fi rmware version of bluetooth
module.
played on the fl uorescent indicator tube. Then, the display is
automatically changed to the fi rmware version of bluetooth
module.
4. Press the [DISPLAY] button on the remote commaner, address
of bluetooth module is displayed on the fl uorescent indicator
tube.
tube.
5. To release this mode, press the [
?
/
1
] button.
HCD-HX50BTR/HX70BTR/HX80R/HX90BTR
HCD-HX50BTR/HX70BTR/HX80R/HX90BTR
15
15
SECTION 5
ELECTRICAL CHECKS
FM TUNE LEVEL CHECK
signal
generator
set
Procedure:
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
input directly.
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation
:75 kHz
Modulation
: 1 kHz
ANT input
: 35 dBu (EMF)
Note: Use 75 ohm coaxial cable to connect signal generator and the set.
You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and tune A, B and C signals.
4. Confi rm “TUNED” is lit on the display for A, B and C sig-
4. Confi rm “TUNED” is lit on the display for A, B and C sig-
nals.
When the selected station signal is received in good condition,
“TUNED” is displayed.
“TUNED” is displayed.
Note:
1. CD Block is basically constructed to operate without adjust-
ment.
2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicat-
ed.
3. Use an oscilloscope with more than 10 M
Ω impedance.
4. Clean the object lens by an applicator with neutral detergent
when the signal level is low than specifi ed value with the fol-
lowing checks.
lowing checks.
5. Check the focus bias check when optical pick-up block is re-
placed.
FOCUS BIAS CHECK
+
–
–
CD board
TP121 (RFI)
TP124 (VC)
oscilloscope
(DC range)
Procedure:
1. Connect oscilloscope to TP121 (RFI) and TP124 (VC) on the
1. Connect oscilloscope to TP121 (RFI) and TP124 (VC) on the
CD board.
2. Press the [
?
/
1
] button to turn the power on.
3. Set disc (YEDS-18) on the disc tray and press the [CD
u
]
button to playback.
4. Confi rm that oscilloscope waveform is as shown in the fi gure
below. (eye pattern)
A good eye pattern means that the diamond shape (
◊) in the
center of the waveform can be clearly distinguished.
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
level:
1.2 ± 0.3 Vp-p
Checking Location:
TUNER SECTION
CD SECTION
TP124
(VC)
– CD Board (Conductor Side) –
TP121
(RFI)
IC101
HCD-HX50BTR/HX70BTR/HX80R/HX90BTR
HCD-HX50BTR/HX70BTR/HX80R/HX90BTR
16
16
SECTION 6
DIAGRAMS
6-1. BLOCK DIAGRAM - CD SERVO Section -
SYSTEM CONTROLLER
IC301 (1/5)
CD-MP3 PROCESSOR
IC101
MUTE
2-AXIS
DEVICE
(TRACKING)
(FOCUS)
95
89
A
AVDD
+3.3V
+3.3V
DETECTOR
FNi1 (A)
RFo
97 FPi1 (B)
88
2
AGCi
3
RFRP
RFZi
7
6
TEi
TEZi
83
RFEQo
81 RFi
82 RFRPi
82 RFRPi
30
LO
27
RO
65
AIN (PI4)
66
BCKi (PI5)
BCK
A-IN
BUS1
BUS0
BUS2
BUS3
BUCK
67
LRCKi (PI6)
LRCK
51
PIO3
GATE
49
PIO1
ST-REQ
38
BUS0
R-CH
94 FNi2 (C)
96 FPi2 (D)
100 TNi (E)
98 TPi (F)
91 LDo
92
MDi
2 VO1+
1 VO1–
13 DMO
AUTOMATIC
POWER CONTROL
Q301
LD
PD
LASER DIODE
OPTICAL PICK-UP
BLOCK
(KSM-213DCP)
B
C
D
E
F
12 FMO
10 TRo
9 FOo
20 IO0 (/HSO)
I-V AMP
M401
(SPINDLE)
M402
(SLED)
12 VO2–
11 VO2+
18 VO3+
17 VO3–
26 VO4+
27
7
IN4’ 24
IN3’ 20
IN2’ 9
IN1 3
BIAS 23
84 VRo
VO4–
M
M
FOCUS/TRACKING COIL DRIVE,
SLED/SPINDLE MOTOR DRIVE
IC401
S201
(LIMIT)
DVDD
+3.3V
24
XO
23
XI
X102
16.9344MHz
95 CD DRIVER MUTE
LOADING
MOTOR DRIVE
IC701
CDM LOAD IN 53
CDM LOAD OUT
CDM OPEN SW
CDM CLOSE SW
54
51
52
M
A
CD-L
B
DATA, CLOCK,
A-IN, BCK, LRCK,
GATE, ST-REQ
C
BUS0 – BUS3,
BUCK, CCE, REQ
: CD PLAY
SIGNAL PATH
R-ch is omitted due to same as L-ch.
: USB
VCC
A
B
C
D
E
F
LD
PD
SP+
VC
SP–
SL+
SL–
T+
T–
F+
F–
1
2
3 CD BUS0
13
39
BUS1
4
3
2 CD BUS1
5
40
BUS2 (SO)
8
9
1 CD BUS2
23 CD CLK
6
41
BUS3 (SI)
11
10
100 CD BUS3
12
BUS SWITCH
IC754
1
2
13
4
3
5
5
8
9
6
6
11
10
12
12
BUS SWITCH
IC753
DATA SELECTOR
IC751
A/B
Q352
42
BUCK (CLK)
4
2
3
CCE
21 CD CCE
43
XCCE
54
SBSY
48
PIO0
7
7 MP3 IREQ
25 DEC BUS SEL
19 SBSY
37
XRST
94 CD XRST
5
REQ
6
12
14
13
9
10
11
1
S001
DISC TRAY
OPEN/CLOSE DETECT
OPEN
CLOSE
M001
(LOADING)
47
AOUT2 (PO5)
63
BCK (PO8)
CLOCK
DATA
(Page 18)
(Page 17)
(Page 17)
Click on the first or last page to see other CMT-HX50BTR / CMT-HX70BTR / CMT-HX80R / CMT-HX90BTR / HCD-HX50BTR / HCD-HX70BTR / HCD-HX80R / HCD-HX90BTR service manuals if exist.