DOWNLOAD Sony CMT-HPX11D / HCD-HPX11D Service Manual ↓ Size: 11.31 MB | Pages: 127 in PDF or view online for FREE

53

1

 sub gear (2 step)

gear (sub gear pin right)

gear (sub gear pin right)

5

 two screws (M2

 

×

 5)

6

 

arm section

4

 k tapping screw (2.6

 

×

 8)

3

 cover (R)

hole

hole

hole

sub gear (2 step)

2

 

Align the sub gear (2 step) and 

     the gear (sub gear pin right) hole.

54

1

 Release the lock of the sub slider assy 

     and slide it in the direction of the arrow.

4

 Slide the stocker assy in the 

     direction of the arrow.

5

 Push the sub slider 

     assy into the end of 
     the arm (R).

3

 Check point 2: 

     All the stocker assy is standing.

6

 Check point 3: 

     Two parts of the stopper 
     touch the stock base (B).

stock base (B)

Note. 
If the two parts of the stopper do not touch the stock base (B) when 
the sub slider assy is pushed to the end, the phases are not correctly 
adjusted. Reassemble the assy.

2

 Check point 1: 

     The smooth movement of 
     this part when sliding.

55

•

The cold reset clears all data including preset data stored in
the RAM to initial conditions. Execute this mode when
returning the set to the customer.

1. Press  ?/1  button to turn the set ON.
2. Press three buttons x  ,  DIRECTION , and ?/1

simultaneously.

3. The fluorescent indicator tube does not display any message

and the set is reset.

•

A step of AM channels can be changed over between 9 kHz
and 10 kHz.

1. Press  ?/1  button to turn the set ON.
2. Select the function “TUNER”, and press  TUNER/BAND

button to select the BAND “AM”.

3. Press  ?/1  button to turn the set OFF.
4. Press  +ML  and  ?/1  buttons simultaneously, and the

display of fluorescent indicator tube changes to “STEP  9” or
“STEP  10”, and thus the channel step is changed over.

•

Change of function VIDEO or MD (also the input level
changes).

1. Press  ?/1  button to turn the set ON.
2. Press  FUNCTION  and  ?/1  buttons simultaneously, and

the display of fluorescent indicator tube changes to “MD” or
“VIDEO”, and thus the channel step is changed over.

3. Press  ?/1  button to turn the set OFF.

   The disc tray lock function for the antitheft of a demonstration

disc in the store is equipped.

1. Press the   ?/1  button to turn the set on.
2. Press two buttons of  x    and  Z    simultaneously for five

seconds.

3. The message “LOCKED” is displayed and the tray is locked.

1. Press two buttons of  x    and  Z    simultaneously for five

seconds.

2. The message “UNLOCKED” is displayed and the tray is

unlocked.

When “LOCKED” is displayed, the tray lock is not released by
turning power on/off with  `/1  button.

•

This mode is used to check operations of the respective sections
of Amplifier, Tuner, and Tape.

•

To enter COMMON (MC) Test Mode

1. Press   ?/1  button to turn on the set.
2. Press the three buttons of  x  ,   DIRECTION  and  DSGX

simultaneously.

3. When  VOLUME  control knob is turned clockwise even

slightly, the sound volume increases to is maximum and a
message “VOLUME MAX” appears for two seconds, then
the display returns to the original display.

4. When  VOLUME  control knob is tuned counter-clockwise

even slightly, the sound volume decreases to its minimum and
a message “VOLUME MIN” appears for two seconds, then
the display returns to the original display.

5. When you press the  EQ EDIT  button, the message “GEQ

MAX” is displayed and the entire band of the graphic equalizer
is set to the maximum level.

6. When you press the  EQ EDIT  button, the message “GEQ

MIN” is displayed and the entire band of the graphic equalizer
is set to the minimum level.

7. When you press the  EQ EDIT  button, the message “GEQ

FLT” is displayed and the entire band of the graphic equalizer
is set to the center level.

8. When you want to exit this mode, press  ?/1  button.
9. The cold reset is enforced at the same time.

1. Press  ?/1  and  EX-CHANGE  buttons simultaneously, and

the display of fluorescent indicator tube changes to “COL
PAL” or “COL  NTSC”, and the color system is changed over.

•

This mode moves the position to the position durable to vibra-
tion Use this mode when returning the set to the customer
after repair.

1. Press  ?/1  button to turn the set ON.
2. Press three buttons  x  ,  ECHO  and  ?/1  simultaneously.
3. After the “STANBY” display blinks six times, a message

“LOCK” is displayed on the fluorescent indicator rube, and
the DVD ship mode is set.

•

This mode moves the pick-up to the position durable to vibra-
tion. Use this mode when returning the set to the customer
after repair.

1. Press  ?/1  button to turn the set ON.
2. Press three buttons  DSGX  ,  DVD/u    , and  EQ EDIT

simultaneously.

3. After the “STANDBY” display blinks six times, a message

“LOCK” is displayed on the fluorescent indicator tube, and
the DVD ship mode is set.

56

1. When the panal test mode is activated, press the  EQ EDIT

button and the model name and destination is displayed one
after the other.

2. Whenever press the  EQ EDIT +  button, the version is

displayed in order of MC, GC, ST, TA, TM, TC and DVD.

3. Press the  EQ EDIT -  button and the date of the software

production is displayed.

4. Press the  EQ EDIT -  button again and the version is displayed.
5. To exit from this mode, press three buttons  x  ,  DSGX  and

ECHO  simultaneously.

•

This mode is used to check the version, FL tube, LED and
keyboard.
Enter the panel test mode.

1. Press  ?/1  button to turn the set ON.
2. Press three buttons  x  ,  DSGX  , and  ECHO  simultaneously.
3. LEDs and fluorescent indicator tube are all turned on.

1. When the panel test mode is activated, press the  DIRECTION

button, to select the key test mode. In the key check mode, the
fluorecent indicator displays “K 0  V0”. Each time a button is
pressed, “K” value increases. However, once a button is
pressed, it is no longer taken into account. When all keys are
pressed correctly, “K25  V0” is displayed.

2. To exit from this mode, press three buttons  x  ,  DSGX  and

ECHO  simultaneously.

1. Press the  ?/1  button to turn the set on.
2. Select the FUNCTION to DVD.
3. Press the  ?/1  button to turn off the main power.
4. While depressing the  x  button, press the  ?/1  button.
5. The message “DVD POWER OFF” is displayed.
6. Press the  ?/1  button to turn off the main power.
7. Repeat step 1 to 4.
8. The message “DVD POWER ON” is displayed.

1. Press the  ?/1  button on the main unit.
2. Set the FUNCTION to DVD.
3. Press two buttons of  Z  and  x   simultaneously.
4. When  VOLUME  control knob is turned clockwise.

The message “SERVICE IN” is displayed on the display. The
Test Mode Menu is displayed.

5. To execute each function, select the number on the remote

commander.

6. See the following section for explanation in detail.
7. To exit from this mode, press the  ?/1  button.

•

This mode is used to enable infinite repetitions. Normally, the
number of repetitions allowed is 5.

1. Press the  ?/1  button to turn the set on.
2. Select the FUNCTION to DVD.
3. Press three buttons  DISC SKIP  ,  x    and  ECHO

simultaneously.

4. Infinited repetitions is enable.