Sony CMT-HPR95 / HCD-HPR95 Service Manual ▷ View online
5
HCD-HPR95
Other Operations
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
1
Press CD wa to select the CD function.
2
Press PLAY MODE qs repeatedly until “PGM”
appears while the player is stopped.
appears while the player is stopped.
3
Press DISC SKIP qj to select a disc.
4
Press ./> 6 repeatedly or turn the jog
dial 8 on the unit until the desired track number
appears.
dial 8 on the unit until the desired track number
appears.
When programming MP3 files, press
+/– (select
folder) 7 repeatedly or turn the jog dial 8 on the
unit to select the desired folder, and then select the
desired file.
unit to select the desired folder, and then select the
desired file.
Current disc
Loaded disc
5
Press ENTER 9 to add the track or file to the
program.
program.
“– –.– –” appears when the total time exceeds 100
minutes for a CD, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 file.
minutes for a CD, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 file.
6
Repeat steps 4 through 5 to program additional
tracks or files, up to a total of 25 tracks or files.
tracks or files, up to a total of 25 tracks or files.
7
To play your program of tracks or files, press N
(play) wj.
(play) wj.
The program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press N (play) wj.
tray. To play the same program again, select the CD
function, and press N (play) wj.
To cancel Program Play
Press PLAY MODE qs repeatedly until “PGM”
disappears while the player is stopped.
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR wh while the player is stopped.
To view program information, such as total
track number of the program
track number of the program
Press DISPLAY 3 repeatedly.
Tip
You can program additional tracks or files during playback by using
the jog dial.
You can program additional tracks or files during playback by using
the jog dial.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (see “Listening to the
radio”).
radio”).
2
Press TUNER MEMORY wk.
3
Press +/– 6 repeatedly to select your desired
preset number.
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
preset number, the station is replaced by the new
stations.
4
Press ENTER 9.
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE qs repeatedly until “PRESET” appears,
and then press +/– 6 repeatedly to select the
desired preset number.
MODE qs repeatedly until “PRESET” appears,
and then press +/– 6 repeatedly to select the
desired preset number.
Using the Timers
The system offers two timer functions. If you use Play
Timer with the Sleep Timer, the Sleep Timer has priority.
Timer with the Sleep Timer, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
the clock is not set.
Press SLEEP wl on the remote repeatedly. If you select
“AUTO,” the system automatically turns off after the
current disc stops or in 100 minutes.
“AUTO,” the system automatically turns off after the
current disc stops or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/– 4 to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
+/– 4 to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
2
Press CLOCK/TIMER SET ws.
3
Press ./> 6 repeatedly to select “PLAY
SET” then press ENTER 9.
SET” then press ENTER 9.
“ON” appears, and the hour indication flashes.
4
Set the time to start playing.
Press ./> 6 repeatedly to set the hour,
and then press ENTER 9.
and then press ENTER 9.
The minute indication flashes. Use the procedure
above to set the minute.
above to set the minute.
5
Use the same procedure as in step 4 to set the
time to stop playing.
time to stop playing.
6
Select the sound source.
Press ./> 6 repeatedly until the desired
sound source appears, and then press ENTER 9. The
display shows the timer settings.
sound source appears, and then press ENTER 9. The
display shows the timer settings.
7
Press "/1 (power) 1 to turn off the system.
The system turns on 15 seconds before the preset
time.
If the system is on at the preset time, the Play Timer
will not play.
time.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT ws, press ./>
6
6
repeatedly until “PLAY SEL” appears, and then press
ENTER 9.
To cancel the timer
Repeat the same procedure as above until “TIMER OFF”
appears, and then press ENTER 9.
appears, and then press ENTER 9.
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the setting is not canceled
manually.
The Play Timer setting remains as long as the setting is not canceled
manually.
Selected track
or file number
or file number
Total playing time of program
(including selected track or file)
(including selected track or file)
Preset number
HCD-HPR95
6
•
This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SECTION 3
DISASSEMBLY
SET
3-2. CASE
(Page 7)
3-3. BACK PANEL
(Page 7)
3-4. MAIN BOARD
(Page 8)
3-6. FRONT PANEL BLOCK,
CD MECHANICAL (DLM5B)
(Page 9)
(Page 9)
3-7. BELT (DLM3A)
(Page 10)
3-8. OPTICAL PICK-UP BLOCK
(Page 10)
3-5. AMP BOARD,
POWER BOARD BLOCK
(Page 8)
(Page 8)
HCD-HPR95
7
Note: Follow the disassembly procedure in the numerical order given.
3-2. CASE
2
three screws
(B3)
(B3)
5
case
1
two screws
(case 3 TP2)
(case 3 TP2)
4
3
3
1
two screws
(case 3 TP2)
(case 3 TP2)
3-3. BACK PANEL
2
eight screws
(B3)
(B3)
3
back panel
1
power cord connector
(CN1)
(CN1)
HCD-HPR95
8
3-4. MAIN BOARD
3-5. AMP BOARD, POWER BOARD BLOCK
7
two screws (B3)
qs
MAIN board
8
6
two connectors
(CN32, CN604)
(CN32, CN604)
5
connector
(CN1203)
(CN1203)
3
flexible flat cable (15 core)
(CN1308)
(CN1308)
4
flexible flat cable (19 core)
(CN1302)
(CN1302)
1
flexible flat cable (9 core)
(CN1306)
(CN1306)
q;
flexible flat cable (9 core)
(CN1310)
(CN1310)
2
flexible flat cable (11 core)
(CN1305)
(CN1305)
9
flexible flat cable (23 core)
(CN1309)
(CN1309)
qa
connector
(CN1307)
(CN1307)
1
screw
(B3)
(B3)
1
screw
(B3)
(B3)
2
3
AMP board,
POWER board block
POWER board block
Click on the first or last page to see other CMT-HPR95 / HCD-HPR95 service manuals if exist.