Sony CMT-GS10 / CMT-GS30DAB / HCD-GS10 / HCD-GS30DAB Service Manual ▷ View online
5
HCD-GS10/GS30DAB
Other Operations
Creating your own CD program
(Program Play)
1
Press CD Ȯ to select the CD function.
2
Press PLAY MODE ȭ repeatedly until “PGM” appears
while the player is stopped.
while the player is stopped.
3
Press Ã/Ñ (or ø/Þ on the unit) ȵ
repeatedly until the desired track or file number
appears.
When programing MP3 files, press
repeatedly until the desired track or file number
appears.
When programing MP3 files, press
+/ˋ ȯ
repeatedly to select the desired folder, and then select
the desired file.
the desired file.
Selected track or file number
4
Press ENTER ȸ to add the track or file to the
program.
program.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 15 tracks or files.
tracks or files, up to a total of 15 tracks or files.
6
To play your program of tracks or files, press à (or
CD ā on the unit) Ȯ.
The program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press à (or CD ā on the unit) Ȯ.
CD ā on the unit) Ȯ.
The program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press à (or CD ā on the unit) Ȯ.
To cancel Program Play
Press PLAY MODE ȭ repeatedly until “PGM”
disappears while the player is stopped.
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR Ⱥ on the remote while the player is
stopped.
stopped.
To view program information, such as total
track number of the program
track number of the program
Press DISPLAY Ȭ repeatedly.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (See “Listening to the
radio”).
radio”).
2
Press TUNER MEMORY ȭ.
Preset number
3
Press +/ˋ (or TUNING + or ˋ on the unit) ȵ
repeatedly to select your desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
repeatedly to select your desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press ENTER ȸ.
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE ȭ repeatedly until “PRESET” appears, and
then press +/ˋ (or TUNING + or ˋ on the unit) ȵ
repeatedly to select the desired preset number.
MODE ȭ repeatedly until “PRESET” appears, and
then press +/ˋ (or TUNING + or ˋ on the unit) ȵ
repeatedly to select the desired preset number.
Using the Timers
The system offers two timer functions. If you use both
timers, the Sleep Timer has priority.
timers, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP Ȼ repeatedly. If you select “AUTO,” the
system automatically turns off after the current disc stops
or in 100 minutes.
the clock is not set.
Press SLEEP Ȼ repeatedly. If you select “AUTO,” the
system automatically turns off after the current disc stops
or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/ˋ ȱ to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
Prepare the sound source, and then press VOLUME
+/ˋ ȱ to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
2
Press CLOCK/TIMER SET ȷ.
3
Press Ã/Ñ ȵ repeatedly to select “PLAY,” and
then press ENTER ȸ.
“ON TIME” appears, and the hour indication flashes.
then press ENTER ȸ.
“ON TIME” appears, and the hour indication flashes.
4
Set the time to start playing.
Press Ã/Ñ ȵ repeatedly to set the hour, and
then press ENTER ȸ.
The minute indication flashes. Use the procedure
above to set the minutes.
then press ENTER ȸ.
The minute indication flashes. Use the procedure
above to set the minutes.
5
Use the same procedure as in step 4 to set the time
to stop playing.
to stop playing.
6
Select the sound source.
Press Ã/Ñ ȵ repeatedly until the desired
sound source appears, and then press ENTER ȸ. The
display shows the timer settings.
Press Ã/Ñ ȵ repeatedly until the desired
sound source appears, and then press ENTER ȸ. The
display shows the timer settings.
7
Press ÒÄÆ ȩ to turn off the system.
If the system is on at the preset time, the Play Timer
will not play.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT ȷ, press Ã/Ñ ȵ
repeatedly until “PLAY” appears, and then press ENTER
ȸ.
repeatedly until “PLAY” appears, and then press ENTER
ȸ.
To cancel the timer
Repeat the same procedure as above until “OFF” appears,
and then press ENTER ȸ.
and then press ENTER ȸ.
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the setting is not canceled
manually.
The Play Timer setting remains as long as the setting is not canceled
manually.
6
HCD-GS10/GS30DAB
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-3. TOP PANEL ,DAB BOARD (UK)
(Page 7)
3-4. FRONT PANEL ASSY
(Page 8)
3-5. PANEL BOARD
(Page 8)
3-8. MAIN BOARD
(Page 10)
3-9. REG BOARD,
WIRE HOLD BOARD
(Page 10)
3-13. PT BOARD,
POWER TRANSFORMER
(Page 12)
3-7. DC FAN
(Page 9)
3-10. AC CORD, TUNER (UK)
(Page 11)
3-11. CD MECHANISM
(Page 11)
3-12. AMP BOARD
(Page 12)
3-6. HP BOARD,
AUX BOARD
(Page 9)
3-14. BELT
(Page 13)
3-15. OPTICAL PICK-UP (KSM-213DCP),
BD90 BOARD
(Page 14)
3-2. SIDE PANEL (R) AND
SIDE PANEL (L)
(Page 7)
SET
Ver. 1.2
7
HCD-GS10/GS30DAB
3-2. SIDE PANEL (R) AND SIDE PANEL (L)
3-3. TOP PANEL, DAB BOARD (UK)
3
side panel (R)
6
side panel (L)
1
two screws
(3
(3
×
12)
4
two screws
(3
(3
×
12)
2
two tapping screws
(+BVTP 3
(+BVTP 3
×
10)
5
two tapping screws
(+BVTP 3
(+BVTP 3
×
10)
Note:
Follow the disassembly procedure in the numerical order given.
Ver. 1.2
1
screw
(+KTP2 3
×
8)
2
screw
(+KTP2 3
×
8)
4
two claws
5
top panel
3
two tapping screws
(+BVTP 3
(+BVTP 3
×
10)
(EXCEPT UK)
7
screw
(+KTP2 3
×
8)
8
two tapping screws
(+BVTP 3
(+BVTP 3
×
10)
qa
top panel
0
wire (flat type)
9core (CN500)
(UK)
qs
three screws
(+BVTP 2.6)
qg
DAB board
qd
wire (flat type)
9core
qf
pin connector
9
washer
6
screw
(+KTP2 3
×
8)
8
HCD-GS10/GS30DAB
9
screw
(+KTP2 3
×
8)
q;
screw
(+KTP2 3
×
8)
1
screw
(+BVTP 3
×
8)
8
two screws
(+BVTP 3
×
10)
2
screw
(+BVTP 3
×
8)
3
wire (flat type)
5core (CN601)
7
wire (flat type)
25core (CN121)
5
connector
(CN105)
(CN105)
6
connector
(CN104)
(CN104)
qa
front panel
assy
4
Remove the two harnesses
that is fixed on the clamp.
that is fixed on the clamp.
When assembling,
clamp the two harnesses with
a lead pin.
clamp the two harnesses with
a lead pin.
PRECAUTION DURING
CONNECTOR INSTALLATION
CONNECTOR INSTALLATION
MAIN board
lead pin
lead pin
harness
harness
9
wire (flat type)
25core (CN712)
q;
PANEL board
8
claw
4
two screws
(+BVTP 2.6
×
8)
6
KEY board
2
knob (VOL)
3
ring (VOL)
5
connector
(CN701)
(CN701)
7
eleven screws
(+BVTP 2.6
×
8)
9
wire (flat type)
29core (CN712)
1
two foot (felt)
(UK)
3-4. FRONT PANEL ASSY
3-5. PANEL BOARD
Ver. 1.2
Click on the first or last page to see other CMT-GS10 / CMT-GS30DAB / HCD-GS10 / HCD-GS30DAB service manuals if exist.