DOWNLOAD Sony CMT-EX100 / HCD-EX100 Service Manual ↓ Size: 3.45 MB | Pages: 46 in PDF or view online for FREE

Model
CMT-EX100 HCD-EX100
Pages
46
Size
3.45 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
cmt-ex100-hcd-ex100.pdf
Date

Sony CMT-EX100 / HCD-EX100 Service Manual ▷ View online

7
HCD-EX100
SECTION 2
GENERAL
This section is extracted from
instruction manual.
8
HCD-EX100
Remote Control
qg
qh
ql
qk
qj
w;
1 2 3 4
wa
ws
6
7
8
9
5
qf
0
qd
qa
qs
BASS +/– qg (14)
CD N qk (9)
CLOCK/TIMER SELECT 6
(16)
CLOCK/TIMER SET 7 (8, 15)
DISPLAY  5 (8, 12, 14)
DSG qd (14)
ENTER 8 (8, 11, 12, 15)
FM MODE 3 (13)
FUNCTION ws (9, 16)
MEMORY  9 (12)
Number buttons w; (10)
OPEN/CLOSE Z 1 (9)
PC/TAPE  q; (16)
PLAY MODE wa (9, 11)
REPEAT  3 (10)
SLEEP 2 (15)
SURROUND qh (14)
TREBLE +/– qf (14)
TUNER BAND qj (12)
TUNING MODE wa (12)
VOL +/– qs
BUTTON DESCRIPTIONS
@/1 4
+
/ – qa
. qa
> qa
X qk
x qk
m ql
M ql
Setting the time
1
Turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
Proceed to step 4 when you set the clock for
the first time.
3
Press . or >
.
>
.
>
.
>
 repeatedly to select
“CLOCK SET”, then press ENTER on
the remote.
The day indication flashes.
4
Press 
 or 
 repeatedly to set the
day, then press ENTER on the remote.
The hour indication flashes.
5
Press 
 or 
 repeatedly to set the
hour, then press ENTER on the remote.
The minute indication flashes.
6
Press 
 or 
 repeatedly to set the
minute, then press ENTER on the
remote.
The clock starts working.
Tip
If you made a mistake or want to change the time,
start over from step 1.
Turning off the clock display
in standby mode
Press DISPLAY on the remote while the
system is off.
To turn on the clock display, press DISPLAY
on the remote again.
Notes
• When the Daily Timer is set, you cannot turn off the
clock display.
• The clock display will appear when you set the
Daily Timer during turning off the display.
9
HCD-EX100
SECTION 3
DISASSEMBLY
3-1. REAR COVER, BOTTOM PLATE, CASE AND EJECT BOARD
Note: Disassemble the unit in the order as shown below.
1
2
Two claws
Rear cover
9
Case with cover (top) assy
3
Four screws
       (+BVT3X5)
4
Bottom plate
5
Three screws
       (+BVTT3X5)
5
Three screws
       (+BVTT3X5)
8
Connector
      (from CN602
        on Panel board)
6
B
B
A
A
6
7
Screw (2X3)
Washer
qa
qs
0
Eject board
Set
Panel board and Stabilizer
Amp block
CD block
Motor assy, Cam and SW board 
Base unit and Pick up assy
Main board,REG board, Power board
Rear cover, Bottom plate, Case and Eject board
Note: Follow the disassembly procedure in the numerical order given.
10
HCD-EX100
3-3. AMP BLOCK
3-2. PANEL BOARD AND STABILIZER
4
2
3
Remove the Earth clip
Front panel assy
1
Two screws (+BVTT3X5)
5
Two screws
   (+BVTT2.6X8)
5
Three screws
   (+BVTT2.6X8)
7
Panel board
6
Flat type wire
   (CN601)
Claw
Stabilizer
Stabilizer
Stabilizer claw
Turn the stabilizer claw in the direction
of the arrow to remove it from the notch
on the stabiholder.
Connector
AMP board: CN801
AMP block
Two screw (BVTT3x5)
Screw (BVTT3x5)
Connector
AMP board: CN810
Connector
AMP board: CN802
2
3
4
1
1
5
Page of 46
Display

Click on the first or last page to see other CMT-EX100 / HCD-EX100 service manuals if exist.