Sony CMT-EP707 / HCD-EP707 Service Manual ▷ View online
HCD-EP707
8
3. DRAWER
7
5
claw
6
claw
4
Meet the drawer and the bevel gear
as shown in the figure above.
as shown in the figure above.
bevel gear
drawer
drawer
2
Uptilt the right side of the drawer and engage the ditch of the drawer with the claw
A
.
3
Uptilt the right side of the drawer more and engage the ditch of the drawer with the claw
B
.
Note: After claws are engaged, put the drawer in holizontal position
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
1
Push the drawer
in the direction of arrow to the chassis
as shown in the figure above.
in the direction of arrow to the chassis
as shown in the figure above.
claw
B
claw
A
ditch
arm stopper B
drawer
drawer
HCD-EP707
8
3. DRAWER
7
5
claw
6
claw
4
Meet the drawer and the bevel gear
as shown in the figure above.
as shown in the figure above.
bevel gear
drawer
drawer
2
Uptilt the right side of the drawer and engage the ditch of the drawer with the claw
A
.
3
Uptilt the right side of the drawer more and engage the ditch of the drawer with the claw
B
.
Note: After claws are engaged, put the drawer in holizontal position
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
1
Push the drawer
in the direction of arrow to the chassis
as shown in the figure above.
in the direction of arrow to the chassis
as shown in the figure above.
claw
B
claw
A
ditch
arm stopper B
drawer
drawer
HCD-EP707
8
3. DRAWER
7
5
claw
6
claw
4
Meet the drawer and the bevel gear
as shown in the figure above.
as shown in the figure above.
bevel gear
drawer
drawer
2
Uptilt the right side of the drawer and engage the ditch of the drawer with the claw
A
.
3
Uptilt the right side of the drawer more and engage the ditch of the drawer with the claw
B
.
Note: After claws are engaged, put the drawer in holizontal position
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
1
Push the drawer
in the direction of arrow to the chassis
as shown in the figure above.
in the direction of arrow to the chassis
as shown in the figure above.
claw
B
claw
A
ditch
arm stopper B
drawer
drawer
HCD-EP707
8
3. DRAWER
7
5
claw
6
claw
4
Meet the drawer and the bevel gear
as shown in the figure above.
as shown in the figure above.
bevel gear
drawer
drawer
2
Uptilt the right side of the drawer and engage the ditch of the drawer with the claw
A
.
3
Uptilt the right side of the drawer more and engage the ditch of the drawer with the claw
B
.
Note: After claws are engaged, put the drawer in holizontal position
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
and check that the drawer is loading by moving it back and forth about 5 mm.
If the drawer moves a little, redo this procedure.
1
Push the drawer
in the direction of arrow to the chassis
as shown in the figure above.
in the direction of arrow to the chassis
as shown in the figure above.
claw
B
claw
A
ditch
arm stopper B
drawer
drawer
