DOWNLOAD Sony CMT-EP707 / HCD-EP707 Service Manual ↓ Size: 3.52 MB | Pages: 54 in PDF or view online for FREE

Ref. No.

Part No.

Description

Remark

Ref. No.

Part No.

Description

Remark

46

< TERMINAL BOARD >

* SP801

1-537-240-21 TERMINAL BOARD (CHECKER IN)

(SPEAKER (IMPEDANCE USE 4Ω))

**************************************************************

SWITCH BOARD
*************

< SWITCH >

SW901

1-553-577-21 SWITCH, MICRO (CD MECHANISM PROTECT)

**************************************************************

VOL KEY BOARD
**************

< CAPACITOR >

C201

1-162-294-31 CERAMIC

0.001uF

10%

50V

C202

1-162-294-31 CERAMIC

0.001uF

10%

50V

< CONNECTOR >

* CON109 1-564-708-11 PIN, CONNECTOR (SMALL TYPE) 6P

< LED >

LED101 8-719-941-07 LED   SLC-22VR3 (STANDBY)

< TRANSISTOR >

Q103

8-729-173-38 TRANSISTOR

2SA608SP-G

< RESISTOR/ENCODER >

R110

1-249-427-11 CARBON

6.8K

5%

1/4W

R111

1-249-409-11 CARBON

220

5%

1/4W

R123

1-249-426-11 CARBON

5.6K

5%

1/4W

R124

1-249-422-11 CARBON

2.7K

5%

1/4W

R160

1-247-848-11 CARBON

5.1K

5%

1/4W

R214

1-249-429-11 CARBON

10K

5%

1/4W

R215

1-249-429-11 CARBON

10K

5%

1/4W

R216

1-476-916-11 ENCODER (VOLUME)

< SWITCH >

SW103

1-554-303-21 SWITCH, TACTILE (I/1)

SW104

1-554-303-21 SWITCH, TACTILE (MEGA BASS)

SW105

1-554-303-21 SWITCH, TACTILE (MUSIC MENU)

< DIODE >

Z201

8-719-109-85 DIODE   MTZJ-T-72-5.1B

**************************************************************

The components identified by
mark  0  or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.

Les composants identifiés par une
marque  0  sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.

MISCELLANEOUS
**************

6

1-500-712-11 CORE, FERRITE

103

1-796-544-11 DECK, MECH (CRL4349)

152

1-176-636-11 PC BOARD ASSY

0 157

1-555-750-00 CORD, POWER (AEP)

0 157

1-696-535-11 CORD, POWER (UK)

0 157

1-696-966-31 CORD, POWER (AUS)

0 157

1-783-820-11 CORD, POWER (US, CND)

158

1-823-170-11 CORD (WITH CONNECTOR) (FM ANT)

(AEP, UK)

160

1-500-712-11 CORE, FERRITE

204

1-796-542-11 MECHANICAL, CD (CMCJ-0132)

0 F803

1-533-296-11 FUSE, GLASS CYLINDRICAL (DIA.5)

(2A/125V) (US, CND)

0 F803

1-533-468-11 FUSE, GLASS TUBE (DIA.5) (2A/250V)

(AEP, UK, AUS)

0 F804

1-533-419-11 FUSE, GLASS CYLINDRICAL (DIA.5)

(4A/125V) (US, CND)

0 F804

1-533-471-11 FUSE, GLASS TUBE (DIA.5) (4A/250V)

(AEP, UK AUS)

0 TR800

1-437-955-11 TRANSFORMER, POWER (US, CND)

0 TR800

1-437-957-11 TRANSFORMER, POWER (AEP, UK, AUS)

(SPM-03006)

US Model

Canadian Model

AEP Model

UK Model

Australian Model

After assembling the CD mechanism deck, check that the drawer can be operated as shown in the figure below.

lever (slider-2)

1

Slide the lever (slider-2) 
in the direction of arrow 

A

, 

at the full.

2

Slide the lever (slider-2) 
in the direction of arrow 

B

, 

at the full.

3

front

-bottom view-

rear

lever (slider-2)

lever (slider-2)

A

B

drawer

2

1

After taking out drawer from chassis, overturn the drawer and place on a jig, to prevent scratches on the drawer.

2

On the left hand side of the drawer, has a gear call the bevel gear.
Make sure after taking out drawer from the chassis, this gear is still attached to the drawer.
If not, please refer to the picture below and fix back the bevel gear.

3

Using the left hand thumb and place on the bevel gear and the other hand holding the drawer.

4

By turning the bevel gear anti clockwise direction, this gear turning will cause the upper pinion to turn.
The result, it will cause the upper carriage to move out in the direction as shown in the picture below.

bevel gear

drawer

bevel gear

drawer

upper pinion

upper carriage

lower carriage

3

5

When bevel gear is turned anti clockwise, the upper pinion will in also turn 5 times.
When the upper pinion turns, it will transport the upper carriage out from its original position.
When the upper carriage moves to it’s max position (upper pinion turns 5 times) the lower carriage will drop down next.
Carriage up/down is controlled by this part called star gear.
From here, the upper carriage can be taken out. Method as shown below in the picture.

6

Next to take out the lower carriage. The bevel gear is turned anti clockwise.
The lower pinion will turn 5 times. After turning the front star gear will turn slightly.
After finishing, next the upper pinion will turn 5 times.
While it turns, it will transport the lower carriage out to its max position.
From there, the carriage is taken out the same way as how the upper carriage is taken out.

star gear

lower carriage

drawer

star gear

– back view –

bevel gear

drawer

upper pinion

lower carriage